基于P89C668单片机的智能定硫仪系统设计

该仪器根据GB214-2007《煤中全硫的测定方法》库仑滴定法原理设计,全部测试过程采用单片机自动控制,系统主要侧重于电路简单、系统抗干扰能力强、测硫精度高和控制温度科学等方面的研制。该方法与目前采用的艾士卡重量分析法和高温燃烧中和法相比具有测定迅速、结果准确的优点。     

电网故障下光伏并网低压故障穿越控制策略的研究

电网发生故障或扰动可能造成光伏并网点电压跌落,严重影响电力系统的安全运行,光伏发电站有必要具备在电压跌落范围和时间内保证不脱网运行的能力。提出一种基于无功补偿的光伏并网低压穿越控制策略。该方法在检测到电压跌落时,通过断开外部电压环路将双闭环控制模式更改为单电流环路操作模式,采用改进后的无功补偿控制策略防止逆变器产生过电流,为电网电压提供无功补偿,较好实现不脱网运行。最后利用Matlab / Simulink软件比较和分析低压穿越控制策略前后的相关参数。仿真结果表明,改进的控制策略可以有效地抑制逆变器输出电流的增加,并且能提供无功功率来支持电网电压,以在电网电压骤降期间实现低压穿越。     

Autonomous Visual Measurement for Accurate Setting of Workpieces in Robotic Cells

This paper introduces a new method of adapting the virtual world of an offline programming model to an actual robotic cell by attaching a CCD camera to the robot. This method requires no specific camera attachment location or optical camera calibration. Furthermore, there is no operational requirement for setting robotic camera location. Robot motion is autonomously generated to identify the camera view line. The view line is adjusted to pass through the designated target point, utilizing visual feedback motion control. This method calibrates reference points between the virtual world of an offline model to an actual robotic cell.     

锻压机械打击力测量误差的加速度补偿

提出了锻压机械打击力测量中存在的问题，介绍了常用的补偿法，并通过实验验证了加速度补偿法是消除锻压机械打击力测量误差的有效途径。     

彩板涂料固化温度曲线的测定

在卷材有机涂层钢板生产中，涂料的固化温度是影响产品质量的重要因素。使用BYKOTRACK和GRADIENT－OVEN测出不同基板、不同涂料的固化温度曲线，并控制固化过程温度参数，可使每次生产都获得最佳固化温度，此而大大减少废、次品，经济效益十分显著。     

On The Measurement of Temperature in Material Removal Processes

Because it is key to understanding the performance of material removal processes and resultant workpiece quality, the measurement of temperature during material removal is done extensively. We review several widely used temperature measurement methods and show how they can be applied to temperature monitoring during material removal. Since there is little documentation on measurement uncertainties as relates to material removal, this paper outlines the physics of each method, detailing the sources and evaluation of uncertainty. Finally, using criteria critical in measuring material removal, methods are compared, and the results presented in guide-format for participants in this field of work.     

Case Depth Measurement of Induction Hardening Using Image Processing

INDUCTION HARDENING of medium carbon steel iswidely used to produce automotive parts,agriculturalequipment and other machines.Inductor with highfrequency electric current was used as a heater totransform microstructure of steel surface into Austenite.Then water was sprayed on the heated steel.Austenitetransformed into Martensite.Area of microstructuralchange was considered to be case depth that was animportant parameter to be controlled in productionprocess.The standard procedure to de…     

关于贝氏体形核和台阶机制的讨论--与徐祖耀院士等商榷

一些合金固溶化(或淬水)后在预贝氏体(孕育)期内等温淬火(或时效)，既保持高温时形成的晶体缺陷，又产生新的晶体缺陷。母相中由于溶质原子扩散而在缺陷处发生偏聚，则形成贫／富溶质微区，即类拐点(spinoclal—like)分解。当贫溶质微区成分作为Ms，其温度等于或高于等温淬火(或时效)温度时，贝氏体将以马氏体样切变形核，故贝氏体是在溶质原子扩散控制下切变形核。在TEM温台试验中未发现台阶生长机制，界面上巨型台阶是贝氏体增宽(厚)速度差异所致。     

Advanced experimental and numerical methods for the analysis of the dynamic forming press behavior

Numerical simulations are used to estimate the dynamic behavior of new concepts of forming presses as well as to improve the dynamic properties of existing machines. These simulations are to be parametrized with appropriate values in order to yield most accurate results. In many cases neither the way of building up the simulation model for the specific problem nor an appropriate method for gathering the needed date are given in advance. Regarding these facts this paper intends both to characterize the way of building up complex simulation models by using basic simulation modules and to describe methods for the identification of the needed parameters that work even under conditions that hitherto made parameter identifications impossible or at least very time-consuming. In this context recent developments in simulating press dynamics will also be characterized as new modal analysis methods that are not yet established in the field of forming technique. The research activities were financed by the European Research Association for Sheet Metal Working.     

Determination of non-methane hydrocarbon emission factors from vehicles in a Tunnel in Seoul in May 2000

Measurements of non-methane hydrocarbons (NMHC) were performed at the entrance and exit of the Sangdo tunnel to estimate emission factors (EF) of NMHC from vehicles in May 2000. About 50 species were analyzed by a combined GC/FID and GC/MS system. Ethylene was the most abundant compound, followed by n-butane and acetylene, respectively. Based on the measurement data, the real world vehicular EF in Seoul was estimated. The highest EF value was 89.8 mg (veh-mile)^-1 for n-butane, followed by ethylene and toluene.