Optimal design of gating systems by gradient search methods

A numerical optimization technique based on gradient-search is applied to obtain an optimal design of a typical gating system used for the gravity process to produce aluminum parts. This represents a novel application of coupling nonlinear optimization techniques with a foundry process simulator, and it is motivated by the fact that a scientifically guided search for better designs based on techniques that take into account the mathematical structure of the problem is preferred to commonly found trial-and-error approaches. The simulator applies the finite volume method and the VOF algorithm for CFD analysis. The direct gradient optimization algorithm, sequential quadratic programming (SQP), was used to solve both a 2D and a 3D gating system design problems using two design variables. The results clearly show the effectiveness of the proposed approach for finding high quality castings when compared with current industry practices.     

Total simulation model of the thermo-mechanical process in shape rolling of steel rods

The production of steel reinforcing bars for civil engineering is investigated by means of FEM-simulation. An integrated system for computing appropriate thermo-mechanical parameters of the rolling process is proposed. Generalized plane strain approach and coupled thermal-mechanical solution are applied. The microstructural model combines both the effect of the recrystallization mechanisms (static, dynamic and metadynamic) upon the austenite grain forming in hot rolling and that of phase transformation upon the final microstructure. The phases are created during interrupted below the temperature of martensite transition cooling. Thus a typical industrial process for thermo-mechanical strengthening of reinforcing bars, known as Tempcor-process is considered. Computational results are validated to experimental measured mechanical properties of the steel. By means of computer simulation the system can perform different solutions, giving the possibility to obtain a reasonable choice of different thermo-mechanical rolling conditions.     

水喷雾灭火系统在电信枢纽工程燃气锅炉房的应用

分析了燃气锅炉的火灾危险性和水喷雾用于燃气锅炉消防的灭火机理,提出了水喷雾灭火系统的设计参数的选择、系统的控制方法以及在设计中可能涉及到的问题和注意事项,并结合工程实例进行了探讨。     

MALL在中国的现状及其建筑设计要点

该文介绍了Mall的产生条件和国内发展概况，并结合实例分析，着重论述建筑设计方面的有关问题。     

Relationship of the Yttrium Compounds with the Alloying Method in ODS Ferritic Stainless Steel

ＲｅｌａｔｉｏｎｓｈｉｐｏｆｔｈｅＹｔｔｒｉｕｍＣｏｍｐｏｕｎｄｓｗｉｔｈｔｈｅ　ＡｌｌｏｙｉｎｇＭｅｔｈｏｄｉｎＯＤＳＦｅｒｒｉｔｉｃＳｔａｉｎｌｅｓｓＳｔｅｅｌＺｈａｎｇＹｏｎｇ（张勇）；ＣｈｅｎＭｉｎｇｂｉａｏ（陈明彪）；ＷｕＣｈｅｎｇＪｉａｎ...     

斗南锰矿选矿厂设计中几个问题的处理

作者在斗南锰矿选矿厂设计中,针对当前锰选厂生产的经验和存在的问题,从工艺角度分别对干、湿筛分、CS-2强磁机的处理量、矿泥强磁选机的选型、以及在强磁选前设置脱除强磁性物质装置等作了分析,并提出了作者的看法。     

热回流式冷凝器的设计

热回流式冷凝器可以形成接近于冷凝气体沸点温度的热回流，采用气液两相分路结构，讨论了此种冷凝器换热面积及液泛极限速度的计算。     

Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.     

国际函件处理信息系统设计

本文试图从系统整体及行业MIS建模方法出发，对国际函件处理信息系统进行了系统设计．在设计中，遵循了对象模板法的开发思想，采用了FoxPro与Excel相结合的技术．所开发出的系统功能较齐全，人权界面友好，具有一定的推广应用价值．