Nitrogen addition to iron powder by mechanical alloying

Nitrogen was alloyed into iron (a) by mechanical processing in a nitrogen gas environment, and (b) by mechanically alloying with iron-nitride powders to characterize resulting nano-structure and nitrogen distribution. Although the infused nitrogen concentration was significantly greater than the thermodynamic equilibrium solubility of iron, no nitrides formed, even for nitrogen concentrations as high as 4.1 wt.% However, a bctFe phase did form. Lattice expansion calculations indicate that the sum of the interstitial bcc-Fe and bctFe nitrogen concentrations was significantly less than the total measured nitrogen concentration. A considerable portion of the mechanically infused nitrogen was determined to be associated with nanograin boundaries.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

面向大规模定制的虚拟设计研究

综述了大规模定制的范围经济性和面向大规模定制的基本设计方法，并提出了一个虚拟设计框架，该框架改变了传统的设计模式，利用先进的设计方法学和仿真支撑技术为产品开发提供了最大柔性和敏捷性。同时，它提供了一个多学科合作的设计环境，用户直接参与进设计循环中。最后，结合新型剑杆织机的开发，展示了一个能够支持新产品快速成功开发的虚拟设计环境。     

一种新型宽频带正交线极化馈源设计

本文介绍一种适用于散射通讯用的前馈抛物面宽频带正交器双线极化馈源设计,该馈源工作于0.8GHz频段。实践证明,该馈源在20％的工作带宽内基本上具有近似于旋转对称的波束,且系统VSWR<1.3。因此,对工作于较低频段的天线,该馈源是很好的选型。     

圆锥形零件冲压变形与成形载荷的分析

由于悬空侧壁部分的变形状态是圆锥形零件成形的关键，而径向拉应力是实现悬空部分成形的必要条件，同时也是该部分冲压成形成败的关键为此，经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式。同时分析了圆锥形零件的成形载荷。     

催化裂化装置中旋流快分系统（VQS）的结构设计

阐述了全渣油催化裂化装置反应器中旋流快分系统(VQS)的工作原理,对其受力情况进行了分析。较详细介绍了放流快分系统的支撑结构形式,并就支撑梁(焊接工字钢)的选材、几何尺寸进行了详细的分析与比较。     

丁二烯装置离心泵机封的改造

中国石化扬子石化股份公司烯烃厂2^#丁二烯装置使用某厂生产的44台ZE型离心泵。其机械密封使用寿命短，机封的小弹簧及辅助密封环在选材上存在一些问题。通过在实践中摸索与总结。对弹簧及密封环选用合适的材料，对原机封的结构进行改进，收到良好效果。     

Definition of a multimaterials design method

Although methods of product design and materials selection have been developed, the recent rise of multimaterials (composites, hybrids, etc.) has shown a lack of tools for engineering in this domain. The present contribution aims at the development of a multimaterials design method based on the adaptation of existing methods and on the conclusions of a case study. In comparison with materials selection, the originality of multimaterials design relates to searching materials coupling mechanisms to satisfy a set of requirements. More, it appears that manufacturing process and validation tests are very important points that must be integrated early in the design process.     

建安工程扣件式钢管脚手架作业中安全技术的应用

扣件式钢管脚手架应用代表着建筑工业化的一个重要发展方向 ,如何安全、规范地使用扣件式钢管脚手架将是我们标准化施工的新课题     

Product Platform Identification and Development for Mass Customization

This paper is mainly concerned with the Identification of an embryonic product platform from a family of products whose composition, configuration and characteristics are represented by Attributed Graphs. The problem becomes that of identifying the largest isomorphic sub-graph with the highest similarity. An algorithm is proposed for solving this problem together with several novel concepts.