YX3高效三相异步电动机的研制

依据用户要求和行业发展指导意见，从电磁设计、工艺创新和结构改进等方面较全面地阐述了YX3高效率三相异步电动机的设计。样机通过了国家防爆电气产品质量监督检测中心的性能检测，取得了中国节能认证证书，通过了中国能效中心能效等级2级的备案，获得了河南省科技成果奖。     

薄壁包装盒底注塑模具设计

薄壁塑件的应用主要是节约材料,其模具设计与通常成型模具有着不同要求.包装盒壁厚仅有1.0mm,就盒底模具设计中结构设计、浇注、冷却、排气和脱模等部分进行了分析,并将设计方案作了详细的阐述.模具经过实践证明:结构合理,产品无变形等缺陷,受到用户的认同.     

Controlled amorphous crystallization: An easy way to make transparent nanoceramics

Fabrication of transparent nanoceramics is attracting more and more interests recently. In this study a new method of amorphous sintering followed by controlled crystallization (ASCC) was developed, and transparent LaAlO₃/t-ZrO₂ nanoceramic was prepared as an example. Based on a eutectic composition of Al₂O₃-La₂O₃-ZrO₂, glass powders were synthesized, sintered, and then converted to nanoceramics by post-heat-treatment. The heat-treatment performed at 1200 °C for 2 h produced a transparent LaAlO₃/t-ZrO₂ nanoceramic with an average grain size of 40 nm. Due to the nanoscale microstructure, the ceramic showed a transparency up to 55% at 800 nm (1 mm thick), Vickers hardness of 19.05 GPa, and fracture toughness of 2.64 MPa m^1/2, respectively.     

Effect of sugar, citric acid and egg white type on the microstructural and mechanical properties of meringues

Meringues are characterized by a predominant air phase and their overall quality is intimately related with microstructure. The formation of meringues microstructure relies on the capacity of egg white (EW) proteins to form voluminous and stable foams and it is ultimately related with the chemical properties of proteins and with the addition of ingredients such as sugars, salts, acids and surfactants.The study aimed at assessing the influence of sugar/EW ratio, citric acid and EW type on the microstructural and mechanical properties of meringues. Meringues prepared with different sugar/EW, citric acid level and different EW type were subjected to microstructural analysis by X-ray microtomography and to mechanical assessment by compression tests.Results demonstrate the ability of X-ray microtomography to reconstruct the 3D microstructure of meringues allowing the measurement of porosity, size, shape and distribution of pores. Citric acid, sugar concentration and EW type play a fundamental role on meringues microstructural parameters and mechanical properties. Low sugar/EW ratios as well as increasing citric acid levels increase the air phase and result in a softer texture of meringues. Moreover, low sugar/EW ratios and increasing citric acid in the meringue result in a reduction of pore size and also influence the shape of pores. Meringues microstructural and mechanical properties are affected by the EW quality: fresh and pasteurized EWs and EWs stored at refrigerated temperatures scored the highest structural and mechanical performances, while powdered and frozen EWs and albumens from old eggs showed the worst results. Not only the balance among ingredients but also the choice of raw materials can strongly affect the final quality of meringues.     

总量控制下的煤炭消费、生产与转换指标交易制度

在计划控制煤炭消费、生产与转换总量,并分配指标的框架下,建立煤炭消费、生产与转换指标交易的煤票制度;融合煤炭消费环节、煤炭生产环节与煤炭转换环节的、市场各自独立的煤票制度,建立涵盖消费、生产、转换三个环节的、统一的煤票交易市场;融合碳排放总量控制制度,建立与之融通的煤票制度体系;切实控制并降低煤炭消费、生产与转换总量.     

Electromagnetic shielding effectiveness and mechanical property of polymer–matrix composites containing metallized conductive porous flake-shaped diatomite

The porous flake-shaped diatomite particles with different micropores diameter were used as forming templates for the fabrication of the conductive core–shell functional fillers by electroless silver plating. The surface morphologies and phase structures of the surface coatings onto diatomite particles with different micropores diameter were evaluated. The effects of micropores diameter on electrical resistivity, electromagnetic shielding effectiveness and mechanical property of polymer–matrix composites containing silver-coated diatomite particles were also investigated in detail. The results show that the micropores onto initial diatomite particles after plating are completely covered with the coating, while the micropores onto diatomite particles with expanding pores are still visible. The expanding micropores onto diatomite particles in certain size range have less impact on the phase structures, electrical resistivity and electromagnetic shielding effectiveness. However, the mechanical properties of composites are improved significantly after expanding micropores by HF acid corrosion.     

A systematic approach for coupling user satisfaction with product design

A fundamental assumption in this paper is that user satisfaction depends on product design. The approach consists of 5 steps: (1) define user satisfaction, (2) decompose product design elements, (3) conduct experiments, (4) develop relationship models, and (5) analyse critical design features. In order to demonstrate the practicability of this approach, relationship models were developed based on experimental data using a total of 60 subjects (30 American and 30 Korean subjects). In addition, critical design features and their common properties were identified for audio/visual consumer products. Similarities and differences between American and Korean consumers were discussed. The resulting relationship models can be used to predict user satisfaction and provide significant remedies for design change.     

Microstructure and mechanical properties of reaction bonded B4C-SiC composites: The effect of polycarbosilane addition

Reaction bonded B₄C-SiC composites were prepared by infiltrating silicon melt into porous B₄C-SiC green preforms at 1500 °C in vacuum. The porous green preform was obtained from a mixture of polycarbosilane (PCS) and particle size graded B₄C after pre-sintering at 1600 °C. For the first time, PCS was used to adjust the phase composition and microstructure of the reaction bonded boron carbide composites. It is indicated that the addition of PCS and its content has a significant influence on the microstructure as well as the mechanical properties of the subsequent reaction bonded B₄C-SiC composites. For the B₄C-SiC composite with 5 wt% PCS added, a flexural strength of 319±12 MPa, and an elastic modulus of 402±18 GPa can be achieved, which is 23% and 15% higher than those of the composite without PCS addition, respectively. While, with the higher content of PCS addition, the mechanical properties of the composites are decreased drastically due to the large amount of residual Si agglomeration in the composites. The reaction mechanisms as well as their microstructure evolution processes correlated with the mechanical properties of the reaction bonded B₄C-SiC composites are further discussed in our work.     

Dynamic effective thickness in laminated-glass beams and plates

In recent years, several equations have been proposed to calculate deflections and stresses in laminated-glass beams and plates under static loading using the concept of effective thickness, which consists of calculating the thickness of a monolithic element with equivalent bending properties to a laminated element. Recently, an effective thickness for the dynamic behavior of laminated-glass beams has been proposed to enable the modal parameters (natural frequencies, loss factors and mode shapes) to be determined using an equivalent monolithic model. In the present paper, the technique has been extended to the two-dimensional case of rectangular laminated-glass plates and the steps needed to estimate the modal parameters of laminated-glass elements using this methodology are presented. The dynamic effective thickness concept has been validated by experimental tests made on a laminated-glass beam and a laminated-glass plate. The results show that good accuracy is achieved in the natural frequencies and mode shapes but high scatter is encountered in the loss factors.     

基于传统街区更新的城市设计

以南京市小西湖地块为例，深入探 讨城市设计在传统街区城市更新中的基础、 角色、手段及成果形式。以提高市民的生活 品质、提高容积率、保护历史地段结构和提 升公共空间品质为目标，本着社会公平立场、 城市记忆立场与城市传统街区风貌保护的立 场，通过基于历史成因的和基于整体市民利 益的两种分配方式，城市设计最终认可城市 形态动态变化的合理性、扩大居民/市民/游 人共享的公共空间、实现居民与建设主体多 方获益。