Analysis and visualisation with host-based software – The features of STNAnaVist™

This article is based on experiences with data and text mining to gain information for strategic business decisions, using host-based analysis and visualisation (A/V), primarily in the field of patents. The potential advantages of host-based A/V are pointed out and the features of the first such A/V software, STN^®AnaVist™, are described in detail. Areas covered include the user interfaces, initial set of documents for A/V, data mining, text mining, reporting, and suggestions for further development.     

Transformations in machining. Part 1. enhancement of wavelet transformation neural network (WT-NN) combination with a preprocessor

Properly selected transformation methods obtain the most significant characteristics of metal cutting data efficiently and simplify the classification. Wavelet Transformation (WT) and Neural Networks (NN) combination was used to classify the experimental cutting force data of milling operations previously. Preprocessing (PreP) of the approximation coefficients of the WT is proposed just before the classification by using the Adaptive Resonance Theory (ART2) type NNs. Genetic Algorithm (GA) was used to estimate the weights of each coefficient of the PreP. The WT-PreP-NN (ART2) combination worked at lower vigilances by creating only a few meaningful categories without any errors. The WT-NN (ART2) combination could obtain the same error rate only if very high vigilances are used and many categories are allowed.     

采用氮气氛保护的再流焊接技术

叙述了先进再流焊接技术的新发展,描述了提高BGA再流焊接效果的工艺要点,优化倒装芯片再流焊接和固化的新方法。最后,讲述了先进的降低氮消耗量的方法即:通过最大限度地提高潜在收益,以促进再流焊接技术的发展,以此来满足装配厂商的需要。     

宝钢曲轴用非调质钢的生产与展望

在实验室研究的基础上，开发了屈服强度为520MPa级的曲轴用微合金化非调质钢48MnV。工业生产了6000余吨φ151mm大规格圆钢，其各项性能满足了用户要求。指出了宝钢曲轴用非调质钢开发和努力的方向。     

改善PZT微位移器线性的一种方法

根据锆钛酸铅压电陶瓷的逆压电效应。设计了以８０３１单片机为核心的压电陶瓷堆微位移器提高了ＰＺＴ的线性，从而满足了在天文自适应系统中所要求的精确微位的应用。     

Current collecting efficiency of micro tubular SOFCs

In this study, current collecting efficiency of the micro tubular solid oxide fuel cell (SOFC) was estimated to determine optimum size of the micro tubular SOFC. Two models for collecting current from single terminal (ST) and double terminal (DT) of anode tube were proposed and used to calculate the current collecting efficiency as functions of anode thickness, tube length and operating temperature. It was shown that design of the cell geometry and current correcting method are significantly important to achieve high performance micro tubular SOFC stacks. The efficiency loss estimated from the DT model was about 2–4-fold lower than those of obtained from the ST model. The DT model was shown to be more effective for higher operating temperature and the tube length.     

10W QCW operation of a proton implanted GaAlAs diode laser array

We report one thick layer of hard-baked photoresist mask.The laser array stripe pattern was defined by standard wet lithography.With this mask, a 10 W QCW(quasi-continuous wave) operation of a narrow proton implanted multiple stripe conventional single quantum well separate confinement heterostructure(SQW-SCH) GaAlAs diode laser array has been realized.These devices exhibit the lateral far-field radiation pattern of a phase-locked array of gain-guided semiconductor injection laser array. The twenty stripe laser array has a lateral far-field beam divergence full width at half maximum (FWHM) of less than 3°, and three twenty stripe laser array has a beam divergence in the plane of the junction of about 9°.     

基于ADV7120的嵌入式VGA接口设计与实现

介绍了一种基于ADV7120的嵌入式VGA接V1设计与实现的方法,对扫描式TFT-LCD接口时序与VGA接口时序进行了分析对比,利用S3C2440A的LCD控制器和高性能视频D／A芯片ADV7120将扫描式TFT-LCD接口转换成VGA接口,给出了转换电路原理图和LCD控制寄存器的配置方法。实验结果表明：采用这种方法可以正确输出VGA同步信号和图像数据信号,VGA显示器图像清晰稳定,满足系统要求。