Inactivation of Giardia muris Using Ozone and Ozone-Hydrogen Peroxide

The disinfection effects of the ozone molecule alone and that of ozone decomposition products when inactivating Giardia muris cysts were investigated at bench-scale using two different ozone demand-free laboratory buffer systems. The first water was a 0.05 M phosphate buffer with hydrogen peroxide added at a 10:1 weight ratio. The second water was a 0.05 M phosphate – 0.01 M bicarbonate buffer which quickly scavenged radical species from ozone decomposition. The C3H/HeN mouse model was used to assess the infectivity of ozone treated cysts.

The phosphate-bicarbonate buffer system had significantly greater (P ≤ 0.05) inactivation of G. muris cysts than that observed in the phosphate buffer – peroxide system where ozone was completely decomposed in less than 120 s. Consequently, the design of ozone disinfection processes should maintain ozone residual for disinfection prior to the addition of hydrogen peroxide for the oxidation of other compounds.     

Hollow fiber membrane contactor as a gas-liquid model contactor

Microporous hollow fiber gas-liquid membrane contactors have a fixed and well-defined gas-liquid interfacial area. The liquid flow through the hollow fiber is laminar, thus the liquid side hydrodynamics are well known. This allows the accurate calculation of the fiber side physical mass transfer coefficient from first principles. Moreover, in the case of gas-liquid membrane contactor, the gas-liquid exposure time can be varied easily and independently without disturbing the gas-liquid interfacial area. These features of the hollow fiber membrane contactor make it very suitable as a gas-liquid model contactor and offer numerous advantages over the conventional model contactors. The applicability and the limitations of this novel model contactor for the determination of physico-chemical properties of non-reactive and reactive gas-liquid systems are investigated in the present work. Absorption of CO₂ into water and into aqueous NaOH solutions are chosen as model systems to determine the physico-chemical properties for non-reactive and reactive conditions, respectively. The experimental findings for these systems show that a hollow fiber membrane contactor can be used successfully as a model contactor for the determination of various gas-liquid physico-chemical properties. Moreover, since the membrane contactor facilitates indirect contact between the two phases, the application of hollow fiber model contactor can possibly be extended to liquid-liquid systems and/or heterogeneous catalyzed gas-liquid systems.     

基于改进粒子群优化算法的BP神经网络在大坝变形分析中的应用

BP神经网络以其对非线性系统的强大映射能力而被广泛应用于模糊性、随机性强的大坝变形预测分析中。传统的BP神经网络由于初始权值和阈值的随机性,容易导致网络在训练过程中极易陷入局部最小值,同时存在网络收敛速度慢等缺点。针对传统算法的不足,采用改进的粒子群算法(IPSO)对BP网络的初始权值和阈值给予优化,建立大坝变形预测的IPSO-BP模型,并与PSO-BP网络模型进行对比。结果表明,改进的IPSO-BP模型具有收敛速度更快、预测精度更高的优点。该方法可供大坝安全监测和预警分析参考。     

Adaptive receding horizon control for constrained MIMO systems

An adaptive control algorithm for open-loop stable, constrained, linear, multiple input multiple output systems is presented. The proposed approach can deal with both input and output constraints, as well as measurement noise and output disturbances. The adaptive controller consists of an iterative set membership identification algorithm, that provides a set of candidate plant models at each time step, and a model predictive controller, that enforces input and output constraints for all the plants inside the model set. The algorithm relies only on the solution of standard convex optimization problems that are guaranteed to be recursively feasible. The experimental results obtained by applying the proposed controller to a quad-tank testbed are presented.     

A framework for variable content document generation with multiple actors

ContextAdvances in customization have highlighted the need for tools supporting variable content document management and generation in many domains. Current tools allow the generation of highly customized documents that are variable in both content and layout. However, most frameworks are technology-oriented, and their use requires advanced skills in implementation-related tools, which means their use by end users (i.e. document designers) is severely limited.ObjectiveStarting from past and current trends for customized document authoring, our goal is to provide a document generation alternative in which variants are specified at a high level of abstraction and content reuse can be maximized in high variability scenarios.MethodBased on our experience in Document Engineering, we identified areas in the variable content document management and generation field open to further improvement. We first classified the primary sources of variability in document composition processes and then developed a methodology, which we called DPL – based on Software Product Lines principles – to support document generation in high variability scenarios.ResultsIn order to validate the applicability of our methodology we implemented a tool – DPLfw – to carry out DPL processes. After using this in different scenarios, we compared our proposal with other state-of-the-art tools for variable content document management and generation.ConclusionThe DPLfw showed a good capacity for the automatic generation of variable content documents equal to or in some cases surpassing other currently available approaches. To the best of our knowledge, DPLfw is the only framework that combines variable content and document workflow facilities, easing the generation of variable content documents in which multiple actors play different roles.     

预测控制约束边界效应与解决方法研究

约束预测控制（Constrained model predictive control,CMPC）中,因约束的存在,优化过程中最优控制作用可能会在可行域的边界取值,也就是说会 有一个或多个变量饱和,即约束边界效应. 而过程控制中操纵变量饱和是我们不希望出现的. 对此,首先基于稳态模型,对期望值位于可行域内时最优解必在期望值处达到给出证明;同时证明了期望值在可行域外时最优解可转化为期望值到可行域的投影. 其次,针对变量在动态及稳态过程中饱和的情况提出了改善控制性能的措施——调整目标函数;终端约束的加入,为预测控制系统稳定性提供了保障. 通过对包含约束的连续搅拌釜式反应器（Continuous stirred tank reactor,CSTR）系统进行仿真实验,验证了所提方法的正确性,并说明了对目标函数进行适当调整,可有效改善系统的控制性能.     

The structure of model coatings: latex-bound plastic pigment coatings

The immobilization and consolidation of model coatings based on monodisperse polystyrene (plastic pigment) and S/B latexes of known particle sizes were studied in terms of their packing volumes and the extent of latex shrinkage, which was found to increase with increasing pigment volume up to the critical pigment volume concentration (CPVC). The maximum latex shrinkage was estimated from the CPVC. Then, the porosity of model coatings was calculated based on three proposed latex shrinkage models: maximum, minimum, and linearly decreasing latex shrinkage. The number of pores and the average equivalent spherical pore diameters were subsequently calculated. The opacity and gloss of model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. The CPVC values determined by the opacity, gloss, and porosity versus PVC relationships, respectively, agreed very well with each other. The CPVCs determined by the opacity and porosity versus PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the linearly decreasing value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. Additionally, a minimum crack-free temperature (MCFT) of latex-bound coatings was proposed to better predict the behaviors of latexes as pigment binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.     

Relationship between Viscoelastic and Peeling Properties of Model Adhesives. Part 1. Cohesive Fracture

The viscoelastic and peeling properties of polybutadiene/tackifying resin compatible blends have been studied in detail. Viscoelastic properties have been described through the variations of the complex shear modulus, G*(ω), as a function of frequency, ω and peeling properties through the variations of peeling force (F) as a function of peeling rate (V).

After showing the objective character of the peeling curves obtained, the variations of the peeling force and peeling geometry have been studied as a function of volume fraction of the tackifying resin.

In this first paper, the analysis is focused on the first domain of the peeling curves, i.e. the cohesive fracture region. In this region, the peeling properties have been related to the viscoelastic properties in the terminal region of relaxation. It is shown that the longest relaxation time, τ_o, is a reducing parameter of the peeling curves, so a peeling master curve-which is independent of temperature, resin volume fraction and polymer molecular weight-may be defined. Furthermore, the variations of the test geometry as a function of peeling rate have been investigated: the variations of the radius of curvature of the aluminium foil have been analyzed with respect to the viscoelastic behavior of the adhesive, which in fact governs the test geometry.

A detailed analysis of all these features leads to a model which allows one to calculate the peeling curves in the cohesive domain from the adhesive formulation.     

Dynamics of the wet-end section in paper mills

A model representing the wet-end section of a paper mill has been developed to characterize its dynamic behavior during the grade change. The model is based on the mass balance relationships written for the simplified wetend white water network. From the linearization of the dynamic model, higher-order Laplace transfer functions were obtained followed by the reduction procedure to give simple lower-order models in the form of 1^st-order or 2^nd-order plus dead times. The dynamic response of the wet-end is influenced both by the white water volume and by the level of wire retention. Effects of key manipulated variables such as the thick stock flow rate, the ash flow rate and the retention aid flow rate on the major controlled variables were analyzed by numerical simulations. The simple dynamic model developed in the present study can be effectively used in the operation and control. This paper is dedicated to Professor Se Ki Moon on the occasion of his retirement from Hanyang University.