(<Emphasis Type="Italic">Z,Z</Emphasis>)-6,9-Heneicosadien-11-One: Major Sex Pheromone Component Of Painted Apple Moth, <Emphasis Type="Italic">Teia anartoides</Emphasis>

(Z, Z)-6,9-Heneicosadien-11-one (Z6Z9-11-one-21Hy) was identified as the major sex pheromone component of the painted apple moth (PAM), Teia anartoides (Lepidoptera: Lymantriidae), on the basis of (1) comparative gas chromatographic-electroantennographic detection (GC-EAD) analyses, GC-mass spectrometry (MS), high-performance liquid chromatography (HPLC)-MS, and HPLC-UV/visible spectroscopy of pheromone gland extracts and authentic standards; (2) GC-EAD analyses of effluvia of calling females; and (3) wind tunnel and field trapping experiments with a synthetic standard. In field experiments in Australia, synthetic Z6Z9-11-one-21Hy as a single component attracted male moths. Wind tunnel experiments suggested that a 4-component blend consisting of Z6Z9-11-one-21Hy, (6Z,9R,10S)-cis-9,10-epoxy-heneicosene (Z6-9R10S-epo-21Hy), (E, E)-7,9-heneicosadien-6,11-dione (E7E9-6,11-dione-21Hy), and 6-hydroxy-(E, E)-7,9-heneicosadien-11-one (E7E9-6-ol-11-one-21Hy) (all present in pheromone gland extracts) might induce more males to orient toward, approach, and contact the source than did Z6Z9-11-one-21Hy as a single component. Additional experiments are needed to determine conclusively whether or not Z6-9R10S-epo-21Hy, E7E9-6,11-dione-21Hy, and E7E9-6-ol-11-one-21Hy might be minor sex pheromone components of PAM. Moreover, attractiveness of synthetic pheromone and virgin PAM females needs to be compared to determine whether synthetic pheromone could replace PAM females as trap baits in the program to monitor eradication of exotic PAM in New Zealand.     

Sex attractants for Geometrid and Noctuid moths

Male moths belonging to 17 species of Geometridae and nine species of Noctuidae were captured in traps baited with synthetic chemicals as part of a field screening program. The compounds tested were the C₁₈-C₂₂ homologs of: (1) (3Z,6Z,9Z)-triene hydrocarbons; (2) mixtures containing equal quantities of (3Z,6Z)-cis-9,10-expoxydienes, (3Z,92Z)-cis-6,7-epoxydienes, and (6Z,9Z)-cis-3,4-epoxydienes; (3) (3Z,6Z)-9S,10R-epoxydienes; (4) (3Z,6Z)-9R,10S-epoxydienes; and (5) (3Z,6Z,9Z,11E)-nonadecatetraene. Field captures and electroantennographic assays revealed a high degree of specificity in the responses of many species to the synthetic chemicals. In several species the ability of males to discriminate between the 9S,10R and 9R,10S enantiomers of the monoepoxydiene isomers was clearly shown. Synergists and inhibitors were discovered for several of the reported attractants, some of which were not previously known to have semiochemical activity. The geometrid moths captured includedEpirrhoe sperryi (Herbulot),Mesoleuca ruficillata (Guenée),Triphosa haesitata (Guenée),Metanema inatomaria (Guenée),Prochoerodes transversata (Drury),Cabera erythemaria (Guenée),Synaxis jubararia (Hulst),Dysstroma brunneata ethela (Hulst),Eulithes testata (Linnaeus),Sicya macularia (Harris),Xanthorhoe iduata (Guenée),X. abrasaria aquilonaria (Herrich-Schäffer),X. munitata (Hübner),Itame loricaria (Eversmann),Eupithecia annulata (Hulst),E. rovocastaliata (Packard) andE. satyrata dodata (Taylor). The noctuid moths captured includedBleptina caradrinalis (Guenée),Idia américalis (Guenée),I. aemula (Hübner),Rivula propinqualis (Guenée),Lomanaltes eductalis (Walker),Spargaloma sexpunctata (Grote),Caenurgina distincta (Neumuller),Euclidia cuspidea (Hübner), andZale duplicata (Bethune). Six of the nine noctuid species captured belong to three subfamilies for which sex attractants had not been reported previously. Details for the stereospecific synthesis of (3Z,6Z)-cis-9,10-epoxydienes are also reported.Issued as NRCC No. 24314.     

10kV配网自动化系统建设与规划

介绍10kV配网自动化系统建设与规划的主要内容,并提出注意事项。     

工厂10 kV配电室电气安装技术研究

10k V配电室属于整个供电系统中很重要的组成部分之一,电网使用10k V配电室把电力运送到电力消费群体当中,10k V配电室起到了中转站的作用。如果10k V配电室出现问题,那么就会对供电系统产生严重的影响,尤其是在工厂当中,一旦出现电力供应问题,轻则造成经济损失,重则出现生产安全事故。所以当前人们对10k V配电室的安装问题十分关注,文章就工厂当中的10k V配电室的电气安装技术问题进行了深入的分析,旨在为工厂10k V配电室电气安装工作提供参考,确保10k V配电室能正常运转工作。     

光电探测器薄膜生长条件及机理分析

将苝四甲酸二酐（3,4,9,10-perlenetetracrboxylic dianhydride,PTCDA）真空蒸发到无机半导体p-Si衬底上,研制的p-Si/PTCDA异质结光电探测器,对光照非常敏感,是一种响应度很高的宽带光电子元器件。讨论分析了不同的衬底制备条件制备p-Si/PTCDA异质结薄膜的情况,实验结果表明,制备过程中细微的环境变化,显著影响了器件质量,通过分析成膜质量与器件内部微观机制、能带结构、载流子输运之间的关系,确定制备异质结有机薄膜的硅晶面选择,以及衬底的温度最佳的选择范围。     

10kV配电线路杆塔接地装置冲击特性研究

分析10kV配电线路杆塔接地装置的冲击接地电阻特性对于提高配网的供电可靠性起着十分重要的作用。本文采用了考虑土壤火花放电的时域传输线优化模型计算接地装置计算分段导体的电气参数,并建立PSCAD仿真土壤火花效应的等效计算模型：通过对10kV配电线路的水平一垂直型和方格放射型两种常见的接地装置在经过雷电流时．冲击电阻随土壤电阻率,雷电流幅值以及接地装置埋深大小变化的关系,提出在10kV配电线路中根据地质条件、雷电参数和技术经济要求选择合适的接地装置。     

高温-超压-高CO2背景下致密砂岩储层成岩作用特征——以莺歌海盆地LD10区新近系梅山组-黄流组为例

利用薄片鉴定、扫描电镜、阴极发光及碳氧同位素分析等手段,对莺歌海盆地LD10区新近系梅山组-黄流组高温-超压-高CO₂背景下的储层成岩作用特征及其对孔隙的影响进行了系统研究。研究结果表明: ①莺歌海盆地LD10区新近系梅山组-黄流组储层发育重力流沉积,岩性以中-细粒长石岩屑石英砂岩为主,储层物性以特低-低孔、特低渗特征为主。②压实、胶结和溶蚀作用是研究区主要的成岩作用类型。超压对黏土矿物的转化及石英次生加大具有明显抑制作用,并在一定程度上保护了原生孔隙。富含CO₂的高温流体不仅造成了黏土矿物的异常转化,同时促进了溶蚀作用发生,增加了次生孔隙。③研究区黄二段储层的成岩演化序列为: 菱铁矿胶结→石英次生加大→绿泥石胶结→长石淋滤溶蚀→高岭石形成→早期方解石胶结→早期白云石胶结→长石溶蚀→方解石溶蚀→伊利石大量生成→晚期铁方解石、铁白云石形成。④总体上,压实作用使孔隙度减少了45.30%～62.93%,胶结作用使孔隙度减少了1.65%～35.01%,溶蚀作用使孔隙度增加了0.72%～8.00%。其中,黄流组中下部砂岩储层受到了超压保护和CO₂溶蚀作用的双重影响,物性较好,钻井过程中应考虑高CO₂风险。     

Phase evolution,crystal structure,and microwave dielectric properties of gillespite-type ceramics

A gillespite-structured MCuSi₄O₁₀ (M = Ba_1-xSr_x, Sr_1-xCa_x) ceramics with tetrahedral structure (P4/ncc) were prepared by solid-state reaction method. X-ray diffraction and thermogravimetry with differential scanning calorimetry (TG-DSC) were employed to study the phase synthesis process of BaCuSi₄O₁₀. Pure BaCuSi₄O₁₀ phase was obtained at 1075°C and decomposed into BaSiO₃, BaCuSi₂O₆, and SiO₂ when calcined at 1200°C. The relationships between the crystal structure and microwave dielectric properties of MCuSi₄O₁₀ ceramics were revealed based on the Rietveld refinement and P-V-L complex chemical bond theory. The dielectric constant (ε_r) decreased linearly with decreasing total bond susceptibility and ionic polarizability. Quality factor (Q × f) was closely dependent on bond strength and lattice energy. The temperature coefficient of resonant frequency (τ_f) was controlled by the stability of [CuO₄]⁶⁻ plane in MCuSi₄O₁₀. Optimum microwave dielectric properties were obtained for SrCuSi₄O₁₀ when sintered at 1100°C for 3 hours with a ε_r of 5.59, a Q × f value of 82 252 GHz, and a τ_f of −41.34 ppm/°C. Thus, SrCuSi₄O₁₀ is a good candidate for millimeter-wave devices.     

Trans-10 18:1 in ruminant meats: A review

Trans (t) fatty acids (TFA) from partially hydrogenated vegetable oils (i.e., industrial trans) have been phased out of foods in many countries due to their promotion of cardiovascular disease. This leaves ruminant-derived foods as the main source of TFA. Unlike industrial TFA where catalytic hydrogenation yields a broad distribution of isomers, ruminant TFA are enzymatically derived and can result in enrichment of specific isomers. Comparisons between industrial and ruminant TFA have often exonerated ruminant TFA due to their lack or at times positive effects on health. At extremes, however, ruminant-sourced foods can have either high levels of t10- or t11-18:1, and when considering enriched sources, t10-18:1 has properties similar to industrial TFA, whereas t11-18:1 can be converted to an isomer of conjugated linoleic acid (cis(c)9,t11-conjugated linoleic acid), both of which have potential positive health effects. Increased t10-18:1 in meat-producing ruminants has not been associated with negative effects on live animal production or meat quality. As such, reducing t10-18:1 has not been of immediate concern to ruminant meat producers, as there have been no economic consequences for its enrichment; nevertheless at high levels, it can compromise the nutritional quality of beef and lamb. In anticipation that regulations regarding TFA may focus more on t10-18:1 in beef and lamb, the present review will cover its production, analysis, biological effects, strategies for manipulation, and regulatory policy.     

Creep behavior and microstructure evolution of directionally solidified superalloy IC 10 at high temperature

The creep behavior of directionally solidified （DS） superalloy IC 10 was investigated under 192 MPa and 218 MPa at 980 ℃. Under the testing conditions, the marked creep characteristic of the superalloy is that the creep curve has a short primary and secondary stage and a long tertiary stage. Another creep characteristic is that the superalloy has excellent plasticity at high temperature. To study the creep behavior, the microstructure was observed by SEM and TEM. Different from other microstructure of Ni-base superalloys, superalloy IC10 forms incompletely rafted γ＇ phase during the creep processes. To understand the creep deformation mechanism of superalloy IC10, the movement of dislocations was analyzed. The results show that the dislocations moving in the γ matrix and climbing over the γ＇ precipitates is the main deformation mechanism under the experimental conditions.