Power efficient scheduling over fading channel for cross‐layer optimization

We consider the minimization of long‐term average power consumption for packet transmission between a mobile station and the base station over Nakagami‐m fading channel. Power consumption is minimized by intelligent transmission scheduling design, with the average queuing delay and joint packet loss across MAC and physical layers being confined below certain levels. The problem is formulated as an infinite horizon constrained Markov decision problem and solved by linear programming (LP) method. The primary intention of this paper is to provide a visible paradigm on using LP method to optimize the performance of mobile wireless communication systems. We elaborate the detailed mathematical solution with consistent simulation experiments and emphasize the effectiveness of adaptive transmission scheduling for cross‐layer QoS provisioning. Copyright © 2010 John Wiley & Sons, Ltd.     

Bandwidth‐satisfied routing in multi‐rate MANETs by cross‐layer approach

Previous quality‐of‐service (QoS) routing protocols in mobile ad hoc networks (MANETs) determined bandwidth‐satisfied routes for QoS applications. Since the multi‐rate enhancements have been implemented in MANETs, QoS routing protocols should be adapted to exploit them fully. However, existing works suffer from one bandwidth‐violation problem, named the hidden route problem (HRP), which may arise when a new flow is permitted and only the bandwidth consumption of the hosts in the neighborhood of the route is computed. Without considering the bandwidth consumption to ongoing flows is the reason the problem is introduced. This work proposes a routing protocol that can avoid HRP for data rate selection and bandwidth‐satisfied route determination with an efficient cross‐layer design based on the integration of PHY and MAC layers into the network layer. To use bandwidth efficiently, we aim to select the combination of data rates and a route with minimal bandwidth consumption to the network, instead of the strategy adopted in the most previous works by selecting the combination with the shortest total transmission time. Using bandwidth efficiently can increase the number of flows supported by a network. Copyright 2010 John Wiley & Sons, Ltd.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

SCM: Secure and accountable TLS certificate management

In classical public‐key infrastructure (PKI), the certificate authorities (CAs) are fully trusted, and the security of the PKI relies on the trustworthiness of the CAs. However, recent failures and compromises of CAs showed that if a CA is corrupted, fake certificates may be issued, and the security of clients will be at risk. As emerging solutions, blockchain‐ and log‐based PKI proposals potentially solved the shortcomings of the PKI, in particular, eliminating the weakest link security and providing a rapid remedy to CAs' problems. Nevertheless, log‐based PKIs are still exposed to split‐world attacks if the attacker is capable of presenting two distinct signed versions of the log to the targeted victim(s), while the blockchain‐based PKIs have scaling and high‐cost issues to be overcome. To address these problems, this paper presents a secure and accountable transport layer security (TLS) certificate management (SCM), which is a next‐generation PKI framework. It combines the two emerging architectures, introducing novel mechanisms, and makes CAs and log servers accountable to domain owners. In SCM, CA‐signed domain certificates are stored in log servers, while the management of CAs and log servers is handed over to a group of domain owners, which is conducted on the blockchain platform. Different from existing blockchain‐based PKI proposals, SCM decreases the storage cost of blockchain from several hundreds of GB to only hundreds of megabytes. Finally, we analyze the security and performance of SCM and compare SCM with previous blockchain‐ and log‐based PKI schemes.     

Energy‐aware cross‐layer resource allocation in mobile cloud

This paper proposed an energy‐aware cross‐layer mobile cloud resource allocation approach. In this paper, a hybrid cloud architecture is adopted for provisioning mobile service to mobile device users, which include nearby local cloud and remote public cloud. The computation‐intensive tasks can be processed by the remote public cloud, while the delay‐sensitive computation can be processed by the nearby local cloud. On the basis of the system context and mobile user preferences, the energy‐aware cross‐layer mobile cloud resource allocation approach can optimize the consumption of cloud resource and system performance. The cooperation and collaboration among local cloud agent, public cloud supplier, and mobile cloud user are regulated through the economic approach. The energy‐aware cross‐layer mobile cloud resource allocation is performed on the local cloud level and the public cloud level, which comprehensively considers the benefits of all participants. The energy‐aware cross‐layer mobile cloud resource allocation algorithm is proposed, which is evaluated in the experiment environment, and comparison results and analysis are discussed.     

激光冲击对中高温服役条件下镍基合金K417显微硬度的影响

为研究中高温环境下的激光冲击强化效果,采用功率密度8.5GW/cm2、脉冲宽度10ns的强激光对K417镍基合金冲击改性,利用维氏硬度法测试其在700℃、800℃、900℃保温后的显微硬度值。结果表明中高温保温后,激光冲击硬化效果有所减弱,但不同温度下激光冲击区域的平均硬度均明显大于未冲击区域;深度方向硬度近似呈指数形式衰减,硬化层深度随温度的增加呈减小趋势;单个光斑径向硬度分布与激光空间分布特性导致的等离子体冲击波不均匀相关。研究表明在800℃以下,激光冲击有效提高了K417的综合性能指标。     

Nanoengineering Hybrid Supramolecular Multilayered Biomaterials Using Polysaccharides and Self‐Assembling Peptide Amphiphiles

Developing complex supramolecular biomaterials through highly dynamic and reversible noncovalent interactions has attracted great attention from the scientific community aiming key biomedical and biotechnological applications, including tissue engineering, regenerative medicine, or drug delivery. In this study, the authors report the fabrication of hybrid supramolecular multilayered biomaterials, comprising high‐molecular‐weight biopolymers and oppositely charged low‐molecular‐weight peptide amphiphiles (PAs), through combination of self‐assembly and electrostatically driven layer‐by‐layer (LbL) assembly approach. Alginate, an anionic polysaccharide, is used to trigger the self‐assembling capability of positively charged PA and formation of 1D nanofiber networks. The LbL technology is further used to fabricate supramolecular multilayered biomaterials by repeating the alternate deposition of both molecules. The fabrication process is monitored by quartz crystal microbalance, revealing that both materials can be successfully combined to conceive stable supramolecular systems. The morphological properties of the systems are studied by advanced microscopy techniques, revealing the nanostructured dimensions and 1D nanofibrous network of the assembly formed by the two molecules. Enhanced C2C12 cell adhesion, proliferation, and differentiation are observed on nanostructures having PA as outermost layer. Such supramolecular biomaterials demonstrate to be innovative matrices for cell culture and hold great potential to be used in the near future as promising biomimetic supramolecular nanoplatforms for practical applications.     

Efficient single layer RGB phosphorescent organic light-emitting diodes

We report efficient single layer red, green, and blue (RGB) phosphorescent organic light-emitting diodes (OLEDs) using a “direct hole injection into and transport on triplet dopant” strategy. In particular, red dopant tris(1-phenylisoquinoline)iridium [Ir(piq)₃], green dopant tris(2-phenylpyridine)iridium [Ir(ppy)₃], and blue dopant bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium [FIrpic] were doped into an electron transporting 1,3,5-tris(N-phenylbenzimidazole-2-yl)benzene (TPBi) host, respectively, to fabricate RGB single layer devices with indium tin oxide (ITO) anode and LiF/Al cathode. It is found that the maximum current efficiencies of the devices are 3.7, 34.5, and 6.8 cd/A, respectively. Moreover, by inserting a pure dopant buffer layer between the ITO anode and the emission layer, the efficiencies are improved to 4.9, 43.3, and 9.8 cd/A, respectively. It is worth noting that the current efficiency of the green simplified device was as high as 34.6 cd/A, even when the luminance was increased to 1000 cd/m² at an extremely low applied voltage of only 4.3 V. A simple accelerated aging test on the green device also shows the lifetime decay of the simplified device is better than that of a traditional multilayered one.     

硅晶片化学机械抛光中的化学作用机理

通过分析硅晶片化学机械抛光过程中软质层的形成及其对材料去除过程的影响,研究了使用纳米CeO2磨料进行化学机械抛光中的化学作用机理.分析表明,软质层是抛光液与硅晶片反应形成的一层覆盖在硅基体表面的腐蚀层,其硬度比基材小,厚度大约在几个纳米.软质层的存在一方面增大单个磨料所去除材料的体积,增加材料去除速率;另一方面减小了磨料嵌入硅晶片基体的深度,这对于实现塑性磨削,降低抛光表面粗糙度,都起着重要的作用.     

微晶硅薄膜太阳电池中孵化层研究

对甚高频等离子体增强化学气相沉积技术制备的微晶硅薄膜太阳电池进行了研究.喇曼测试结果显示:微晶硅薄膜太阳电池在p/i界面存在着一定的非晶孵化层.孵化层的厚度随硅烷浓度的增加或辉光功率的降低而增大.可以通过适当的硅烷浓度或适当的辉光功率来降低孵化层的厚度.