用于氢化的铜铬氧化物催化剂的研究

通过铜铬氧化物催化剂用于豆油的选择氢化,研究了制备方法及氢化条件对催化剂活性的影响.在所用的五种催化剂中,以Adkins法制备的催化剂活性最好,碳酸氢铵法次之.文中还对催化剂焙烧气氛、焙烧温度、焙烧时间、铜铬原子比对催化剂活性的影响以及氢化温度、催化剂用量、搅拌速度、氢流速等对反应的影响进行了较详细的讨论.     

一种基于时间戳认证的零水印方案设计

零水印方法是一种新的数字水印方法。本文介绍了零水印的概念及零水印技术的关键问题,提出了一种基于时间戳认证的零水印方案。该方案很好地解决了非零水印的不可见性与鲁棒性之间的矛盾,具有可行性和通用性。     

Target differentiation with simple infrared sensors using statistical pattern recognition techniques

This study compares the performances of various statistical pattern recognition techniques for the differentiation of commonly encountered features in indoor environments, possibly with different surface properties, using simple infrared (IR) sensors. The intensity measurements obtained from such sensors are highly dependent on the location, geometry, and surface properties of the reflecting feature in a way that cannot be represented by a simple analytical relationship, therefore complicating the differentiation process. We construct feature vectors based on the parameters of angular IR intensity scans from different targets to determine their geometry and/or surface type. Mixture of normals classifier with three components correctly differentiates three types of geometries with different surface properties, resulting in the best performance (100%) in geometry differentiation. Parametric differentiation correctly identifies six different surface types of the same planar geometry, resulting in the best surface differentiation rate (100%). However, this rate is not maintained with the inclusion of more surfaces. The results indicate that the geometrical properties of the targets are more distinctive than their surface properties, and surface recognition is the limiting factor in differentiation. The results demonstrate that simple IR sensors, when coupled with appropriate processing and recognition techniques, can be used to extract substantially more information than such devices are commonly employed for.     

K202A压缩机电机轴瓦超温的原因及对策

K202A压缩机的电机轴瓦采用的是动压轴承,经常持续升温。其主要原因是由于滑动轴承和轴之间是半液体摩擦,润滑油在轴颈及轴瓦之间没有形成具有足够压力的油膜,造成滑动轴承和轴局部形成半液体摩擦而产生大量的热量,又无法被带走引起的。文章通过验算K202压缩机电机滑动轴承温度,分析影响滑动轴承运行温度的因素,提出在原滑动轴承上开油楔及加装一台齿轮油泵为滑动轴承强制润滑,并且通过联轴器把电机和压缩机连接起来,用压缩机轴瓦托起电机轴,使电机轴颈和轴瓦之间处于液体摩擦状态,可有效地降低滑动轴承的运行温度。     

Time jitter analysis of 1-bit sigma-delta synthesizer

This letter presents a general analysis of time jitter in sigma-delta synthesizer. One of the practical applications of 1-bit sigma-delta systems is a generation of high-resolution local oscillator (LO) signals. In order to generate LO signals, one may use a single-bit sigma-delta technique to encode sine waves. Today, direct generation of high-frequency sine wave using a clock with higher frequency, is possible. In this letter, we will analyze different LO signal generators and develop a practical way of computation to decide how to choose the best configuration under minimum degradation of signal-to-noise ratio (SNR) at the output.     

Networks for sorting multitonic sequences

Lee and Batcher have designed networks that efficiently merge k separately provided sorted sequences of known lengths totalling n. We show that the design is still possible, and in fact easier to describe, if we do not make use of the lengths, or even the directions of monotonicity, of the individual sequences—the sequences can be provided in a single undelimited concatenation of length n. The depth of the simplest resulting network to sort sequences that are “k-tonic” and of length n is , generalizing Batcher's 1968 results for the extreme values of k (k=2 corresponding to merging, and k=n/2 corresponding to general sorting).The exposition is self-contained and can serve even as an introduction to sorting networks and Batcher's results.     

CXFTV2: A Fortran subroutine for the discrete least squares convex approximation

A Fortan subroutine calculates the least squares approximation to n data values containing random errors subject to non-negative second divided differences (convexity). The method employs a dual active set quadratic programming technique that allows several concavities of an iterate to be corrected simultaneously, which is a distinctive feature of this calculation. A B-spline representation of the iterates reduces each active set calculation to an unconstrained minimization with fewer variables that requires only O(n) computer operations. Details in these techniques including the data structure that establishes the implementation of the method are specified. Numerical testing on a variety of data sets indicates that the subroutine is particularly efficient, terminating after a small number of active set changes, the subroutine being suitable for large numbers of data. A numerical example and its output is provided to help the use of the software.     

用最小二乘法恢复逐行倒相副载波

介绍ＰＡＬ制彩色全电视信号中色同步信号编码原理及恢复逐行倒相副载波的过程中，两种计算色同步信号相位角的方法。并且在实验的基础上得出：最小二乘法在ＰＡＬ制电视信号的副载波相位角计算中不仅可以满足精度要求，而且简便灵活。     

悬浮型速溶PHPAM堵水剂及其堵水技术

本文介绍了以悬浮型速溶PHPAM为基础研制的低温油井堵水剂,讨论了影响堵水剂交联时间和成胶粘度的因素,制定了移动式弹性隔板堵水工艺并成功地应用于二连油田蒙古林砾岩油藏的油井堵水。该堵剂适用于30—60℃油井,交联时间可控、配制简便、快速、施工周期短。     

聚氧乙烯化大豆油脚硫酸钠的合成

以大豆油脚为原料,经聚氧乙烯化、硫酸化合成出一种新型的表面活性剂。