便携式SF6气相色谱仪的试验研究及应用

介绍了一种在台式气相色谱仪的基础上,采用高新技术对核心部件热导池进行革新研制出的便携式SF6气相色谱仪。并通过对该气相色谱仪进行实验室试验研究,以及到现场检测SF6绝缘电气设备中的空气、CF4等杂质含量和SF6纯度,证明了该仪器具备同传统的台式色谱仪同等的灵敏度和精度,而且由于具备便携式这一特点,极大地方便了电力检修人员的现场测试,为SF6电气绝缘设备状态检修提供了一种检测手段。     

On-line acoustic viscometry in oil condition monitoring

The paper describes the theoretical standpoints of developing magnetoelastic viscometers and a concept of viscosity measurement. The magnetoelastic viscometer has shown the readings close to the capillary viscometer. Testing of the oils with PMMA viscosity-index improvers by viscometers has indicated changes in rheological properties observed in the non-Newtonian behavior of the oils. With increase in content or molecular weight of the improver, the non-Newtonian behavior of the oil appeared at lower frequencies of viscosity measurements.     

大宗物料激光精密盘库技术开发利用

大宗物料是指大型料场堆放的矿石、煤、球团矿等原料,因其堆积形状复杂、料场巨大等原因很难精确测量其体积。开发大宗物料激光精密盘库技术,总结实际盘库经验,着重对盘库的各项关键技术进行研究和探讨。     

轧辊修磨表面质量缺陷分析及对策

介绍六辊轧机工作辊、中间辊修磨缺陷的规律特征,通过实际工艺分析以及经验的积累判断表面质量问题产生的原因,并提出解决表面质量问题和检测方法的可行性方案。     

A robust design to reduce variability in glass container inspection

This article presents research efforts made to assist a Fortune 500 glassmaker in reducing the variability of its automated visual inspection systems in assessing product quality. Through interviewing line workers, engineers and managers, and direct observations of the inspection process possible causes leading to large variability observed in the inspection process were identified. Responding to these findings, solutions related to equipment setup, job changes, and operational procedures were suggested in order to minimize the inspection process variations as well as to improve the replicability of the inspection stations. Additionally, a unique statistical experiment was conducted to analyze how three factors (namely, operator, defect size, and threshold value used) would affect the mean of the defective ratio. A robust design aiming at controlling these variations was then given to optimize the system's performance.     

安徽省长江基本建设项目验收程序分析

介绍了长江基本建设项目验收程序和方法,分析了验收中的遗留问题.     

阀控式铅酸蓄电池(VRLA)的维护与监测

分析了阀控式铅酸蓄电池(VRLA)运行中影响其性能的诸多因素,并就蓄电池人工检测与在线监测的技术加以比较,提出蓄电池维护中以内阻在线监测为主的解决方案。     

FBC矿用防爆轴流抽出式局部通风机的试制

为了满足煤矿井下局部通风方式或者井下机械设备冷却、除尘的要求,研制了抽出式防爆局部通风机,文章详细介绍了设计的主要参数、工作原理及其结构特点,并阐述了为保证井下安全可靠运行所采取的措施。     

基于电子样稿的柔印首件“粗-精”检测方法

为了解决柔印首件检验没有基准织物图像作为参照的难点,该文提出一种以电子样稿为参照物的柔印首件“粗-精”检测方法,主要分为粗匹配、精匹配和缺陷检测3个阶段。首先,针对电子样稿与印刷首件内容粗细不一、灰度特性差异大、柔印内容重复率高等问题,融合超点(SuperPoint)与强力匹配(SuperGlue)方法进行粗匹配。然后,针对柔印过程版材伸缩、弯曲引发柔印内容局部偏移的问题,采用归一化互相关(NCC)法微调样稿字符,实现精匹配。最后,提出约束聚类的方法将缺陷检测问题转化为电子样稿与柔印首件差异最小化的问题。对比实验表明,该文方法的柔印首件检测性能要优于其他织物印刷品缺陷检测方法,其漏检率为0,误检率为1.3%,平均Dice系数为0.941,且检测时间仅为2.761 s/pcs,满足实际工程的需求。     

结温在线控制系统的IGBT功率模块热耦合模型

应用有限元法，对IGBT功率模块的三维热分布进行了仿真研究，得到了器件的稳态热阻及瞬态热阻抗。研究了功率模块各芯片之间的相互热影响，提出了热耦合效应热模型的统一结构，基于对瞬态热阻抗曲线的拟合，得到热模型的相关参数，从而建立了热耦合效应热模型。以一个降压变换器为例，阐述了结温在线控制系统的工作原理，并将热模型应用于该系统中，计算结果与测量结果非常一致。