Iron pyrite films prepared by sulfur vapor transport

Iron films deposited via thermal evaporation, with a thickness between 100 and 250 nm, were converted into FeS₂ by open sulfur transport using nitrogen as a gas vector. The films thus obtained constituted a single pyrite phase and were optically highly absorbing. The sulfurization process was optimized. As a result, sample temperature and conversion time were found to be the major determining parameters. The films were characterized using several methods. The crystallinity and phase identification were determined by X-ray diffractometry. Scanning electron microscopy showed a homogeneous surface of both iron and pyrite layers. Optical transmission measurements confirmed the highly absorbing character of FeS₂ and allowed the determination of direct (1.35 eV) and indirect (0.82 eV) transitions.     

IR Radiometry Optical System View Factor and Its Application to Emissivity Investigations of Solid and Liquid Phases

An optical system for fast IR radiometry designed for investigations of thin film thermal properties and pulsed laser melting was analyzed in this work. A methodology for determination of the view factor from calibration measurements was developed. The view factor (0.0255) of the optical system containing two paraboloid mirrors was determined experimentally from calibration measurements on pure metals and metallic alloys. The knowledge of the view factor was then applied to normal emissivity investigations at IR wavelengths. The emissivity of tungsten films prepared by magnetron sputtering was determined for different deposition conditions, varying between 0.036 and 0.071. Liquid phase emissivities of Cu, Mo, Ni, Si, Sn, Ti, and steel were also determined and were found to be higher than solid-state emissivities as predicted from the literature. A knowledge of the liquid-state emissivity of silicon enabled recalculation of the IR signal evolution to the temperature evolution, during and after a nanosecond laser pulse. This was not possible by use of the usual calibration because of silicon’s semi-transparent behavior in the IR range (1–10 μm) in the solid-state phase.     

Optical and thermal properties of poly(ethylene oxide) doped with MnCl2 salt

The optical and thermal properties of prepared poly(ethylene oxide)/MnCl₂ films were studied as a function of MnCl₂ concentration at room temperature. The observed optical energy gap (E_opt) and energy gap tail (ΔE) were determined from the measured absorption spectra. It was found that the optical energy gap decreases with MnCl₂ concentration, and the absorption coefficient reduces sharply at concentration of 5 wt% MnCl₂ compared with the neat PEO. Differential scanning calorimetry (DSC) measurement shows that the heat of fusion increases with the MnCl₂ concentration, while the melting point decreases. Correlation between the observed optical energy gap and heat of fusion is presented.     

IP over Optical网络联合流量工程研究

对IPoverOptical网络的流量工程进行了深入的研究。问题,给出了两种流量工程体系结构,重叠流量工程和联合流量工程,然后对这两种流量工程体系进行了比较,并给出了联合流量工程的实现框图以及需要解决的关键问题。     

鼻咽癌药物我成像定位仪的光学设计

对药物荧光鼻咽癌定位的光学系统进行理论分析，给出了该系统的光学设计方法和设计结果。光学系统设计包括，激光器出射光束与光纤高效率耦合技术，同光轴非接触两光纤间的光束耦合技术以及获得较好的像清晰度和衬度的技术。     

基于HOP的可调光编码／解码器的研究

提出了一种基于全息光处理器的可调光编码/解码器的实现方案。全息光处理器可以在空间进行编/解码，每个通信网络单元可以采用任意速率的数字或模拟的调制信号，它非常适合于多媒体的通信网络环境，通过对全息光处理器的折射率大小和位置的控制，当一个输入光脉冲经过光处理器中具有特定折射率的空间位置后，便可在处理器的输出端口得到合适的输出信号。本文给出了这种基于全息光处理器的可调光编码/解码器的仿真实验，结果是可行的，与以前文献中提出的结构相比，减小了硬件实现的复杂性，降低了成本和功耗，便于集成。     

继续引领光的方向

光通信仍将在未来电信竞争中扮演制高点的角色。运营商建设光网络首先应充分利用光层的技术，提高系统容量，降低系统成本；其次应提供多业务接入平台；最后发展智能光传输网络，增强网络适应能力。北电网络具有优势的城域网络技术集中在三大领域，即城域DWDM、多业务提供平台（MSPP）和弹性分组环（RPR）；北电网络OPTera城域系列产品正是在上述技术优势支撑下的产品。     

21世纪通信网络及其支撑技术

阐述了支撑通信网络的几种关键技术，并通过对这些技术的介绍，说明未来的通信网络是一个国际标准化的、综合化的、宽带化的多媒体数据通信网。     

光学分数傅里叶逆变换的无透镜模式

用波前相因子判断法，将球面波照明物体的自由空间菲涅耳衍射光场分布与分数傅里叶逆变换的标准频谱分布进行位相比较，提供了广义条件下光学分数傅里叶逆变换的无透镜模式，给出其光学实现基本单元参量选择的判定法则，计算机模拟实验证明了结论的可靠与可行。     

论网络升级方式与光纤选择的关系

在重点说明影响传输光纤设计的主要问题的同时，简要介绍了各种升级方式所面临的主要技术挑战，并详细说明这些挑战对传输光纤提出的技术要求。