梁端翼缘扩大型梁柱节点抗震性能和设计方法

为使钢框架梁柱节点满足强柱弱梁的抗震设计原则,并使梁上塑性铰远离梁柱节点区,对梁端翼缘扩大型(包括侧板加强型和翼缘端部放大型)钢框架梁柱节点进行了往复荷载下的试验研究,得到了节点类型和梁端翼缘扩大尺寸对节点滞回性能、延性和耗能能力等指标的影响规律.在使用非线性有限元程序对试验结果进行数值模拟的基础上,研究了梁端翼缘扩大段的长度及宽度等参数对节点性能的影响规律和有效取值范围,给出了实用设计方法.使用梁端翼缘扩大型钢框架节点可以有效实现梁端塑性铰外移,是一种在抗震设计中值得推广的具有良好延性和塑性转动能力的新型节点形式.     

型钢翼缘狗骨式削弱在型钢混凝土节点的作用

为了防止地震时型钢混凝土节点核心区发生剪切破坏以及梁柱连接焊缝发生脆性断裂,提出对型钢混凝土节点核心区附近梁端型钢的上、下翼缘采取狗骨式削弱,并系统研究翼缘削弱对提高型钢混凝土节点抗震性能的作用.研究表明,由于在梁端型钢翼缘采取狗骨式削弱,不仅能够将塑性铰控制在梁型钢削弱的位置,从而有效地降低了节点核心区所受的剪力以及梁柱连接焊缝的应力;而且能够改善节点塑性铰区的转动能力和抗剪性能,提高节点的延性和耗能能力.     

大口径光学透镜瞬态温度场模拟

为考察热辐射效应对光学元件稳、瞬态温度场的影响,给出了考虑辐射和导热耦合换热情况下复杂几何结构光学透镜稳、瞬态热特性的适体坐标下离散坐标法.对喷管形和圆柱形介质进行计算并与其他方法比较表明,建立的适体坐标系下辐射与导热耦合换热计算方法精度较好.对两端为球缺中间为圆柱的大口径透镜内的辐射与导热耦合换热过程进行了数值模拟.计算结果表明,为了精确地预测半透明介质如透镜内的温度分布,应该考虑辐射与导热耦合作用,且应当考虑介质的光谱特性.     

Compressibility of fine-grained soils subjected to closed-system freezing and thaw consolidation

In order to investigate the effects of freezing and thawing on the compressibility of fine-grained soils, freezing and thawing tests and subsequent compression tests with fine-grained soils in an oedometer were carried out. During the freezing, a part of the soils is loosened and another part is over-consolidated under the freezing pressure ?E. The compression curves after the freezing and thaw consolidation are neither different from the normal consolidation curve nor from the rebound curve of an unfrozen soil, until the consolidation pressure ?z = ?E is arrived. Based on the experimental results, a theoretical model has been developed to predict the frost heaves, the thaw-settlements and the compressive deformations of fine-grained soils after the thaw consolidation. The theoretical results are very close to the experimental results.     

基于视觉辅助的汽车转向路感优化控制仿真

汽车行驶速度过快的情况下,与路面的冲击反力会瞬间增大.路感控制过程需要迅速改变硬件结构参数以保持稳定,过大变化使得控制过程出现异动,导致汽车转向路感系统出现“打手”(过控制)问题,传统的路感系统控制方法针对过控制问题,需要动态变化控制参数,使其与过控制过程形成匹配,但是传统方法很容易引起模型不稳,导致对汽车转向路感系统的控制误差增大.提出视觉辅助的汽车转向路感系统快速控制方法,采用Harris角点控制算法获取监控视频中每幅汽车转向路感图像中的角点位置,对每帧汽车转向图像的角点进行LK光流场运算,依据运动目标的光流连续性获取可能的目标角点信息,通过聚类分析对若干角点位置集进行数字运动汽车转向图像处理中的形态学处理,得到汽车当前所处的实际位置,实现汽车转向路感系统的快速控制.实验结果证明,改进种方法的可行性,并且具有较高的控制精度.     

Boronic acid-functionalized nanoparticles: synthesis by microemulsion polymerization and application as a re-usable optical nanosensor for carbohydrates

Translucent boronic acid-carrying nanolatexes are prepared by copolymerisation of vinylbenzyl chloride in microemulsion followed by post functionalisation with 3-aminophenylboronic acid. The diol binding capacity and selectivity of the phenylboronic acid remain unchanged after anchoring to polymer nanoparticles (16 nm diameter, 0.22 mmol/g). The binding of a catechol dye, Alizarin Red S (ARS), to the boronic acid-carrying nanoparticles affords a colored, stable, nanolatex which is used for the selective visual detection of fructose in a competitive assay. The binding of fructose at pH 8.2 is readily evidenced by a color change and monitored by UV/Vis spectroscopy. The nanosensor can be regenerated in acidic medium. The entrapment of the nanolatex in a dialysis cell provides a re-usable support for binding and optical detection.     

钢框架-钢板剪力墙结构修复后的使用性能指标

为便于钢框架-钢板剪力墙结构震后快速修复,统计既有实验结果,提出修复后使用的三级性能指标,基于等效拉杆理论,研究结构在侧向载荷作用下塑性铰的出现顺序、层间位移角和结构应力发展等情况,并建立有限元模型对指标进行验证.结果 表明:在一级修复性能指标(位移角1/220)下,结构板墙轻微受损,对应的修复方法为对板墙进行轻微修复;在二级修复性能指标(位移角1/110)下,结构板墙几乎全面进入塑性状态,需要考虑换板或增加加劲肋修复;在三级修复性能指标(位移角1/85)下,结构板墙已经全部进入屈服状态,而且框架梁端也出现塑性铰,此时不仅需要对板墙进行修复,还要考虑对框架进行修复.     

Application of optical transmission interferometry for in-situ structural investigations of titanium dioxide sputter-deposited coatings

Titanium dioxide coatings (from 0.1 to 1.5 μm thick) have been dc sputter-deposited on glass slides from titanium targets in various Ar-O₂ reactive gas mixtures. Deposition rate and optical properties were controlled in-situ by optical transmission interferometry (OTI) with an optical fibre located behind the glass substrate in order to perform a real-time control of transmittance of the growing film. Thus, it is possible to determine in-situ the optical indices (n, k) and the thickness of the as-deposited film by using a simple simulation, developed on Matlab software. The optical properties of the films were investigated in relation to their structure, which depends on the sputtering conditions adopted. In particular, the effects of the sputtering pressure (working pressure and oxygen partial pressure), the discharge power and the substrate location into the reactor are investigated in detail. Films structure is assessed by standard grazing incidence X-ray diffraction (XRD).     

考虑桩顶水平反力的水平受荷单桩弹塑性解析解

基于线性地基反力法和土体的弹塑性本构关系,对桩顶水平反力系数不为零时的水平受荷桩进行了研究,给出了桩顶土屈服临界荷载（水平力、弯矩）的耦合关系式。研究结果表明,当荷载大于临界荷载时,桩顶土发生塑性屈服,其塑性屈服深度随荷载的增加而增加,但其塑性区扩展速率随桩顶荷载的增加而逐渐减小。给出了弹性区与塑性区桩内力耦合的矩阵方程及其迭代求解格式;利用曲面拟合软件给出了塑性区换算深的计算公式。通过工程算例验证,证明该方法可靠快捷,便于手算,值得推广。      

基于改进Rank变换和分段MER的镜片疵病检测算法

为了解决目前光学镜片表面疵病宽度测量主要依赖人工检测而导致弯曲划痕宽度检测精度较低的问题,提出一种基于Rank变换和分段最小外接矩形(MER)的镜片表面划痕宽度测量方法.该方法首先通过改进的Rank变换算法比较像素灰度相对关系来提取疵病目标,然后计算其最小外接矩形,根据矩形长宽比初步判别疵病类型(划痕或麻点),最后将疵病分割为多个小区段,分别计算每段的最小外接矩形并获得其宽度,比较取最大宽度作为疵病宽度值.试验结果表明,该方法具有较高的可行性与精确性,能够有效提取出疵病和计算其特征参数,可以满足工程实际的需要.