Carbon-encapsulated Fe nanoparticles from detonation-induced pyrolysis of ferrocene

Carbon-encapsulated Fe nanoparticles with size between 5 and 20 nm were synthesized via a picric acid-detonation-induced pyrolysis of ferrocene, which is characterized by a self-heating and extremely fast process. The nanoparticles exhibit well-constructed core-shell structures, with bcc-Fe cores and graphitic shells. The graphitic shells can protect effectively the cores against the attack of HNO₃ solution. The formation of the core-shell nanoparticles can be selectively controlled by adjusting the composition of the picric acid-ferrocene mixture, which determines C/Fe atomic ratio of the reaction system. The core-shell nanoparticles are preferably formed at low C/Fe atomic ratios, while tubular structures are formed at high C/Fe ratio. The possible pathway for the carbon-encapsulated Fe nanoparticles formation is discussed briefly.     

Effects of allelochemicals on plant respiration and oxygen isotope fractionation by the alternative oxidase

The goal of this investigation was to determine the effects of allelochemicals on plant respiration that thereby may be responsible for their role in growth inhibition. We have tested the effects of juglone, quercetin, cinnamic acid, and-pinene on respiration rates, and electron partitioning through the cytochrome and alternative respiratory pathways, by measuring on-line oxygen consumption and oxygen isotope fractionation in soybean cotyledon tissue. Cinnamic acid and-pinene decreased the oxygen consumption rate and increased the relative partitioning of electron transport to the alternative pathway. Possible biochemical mechanisms of these effects are discussed.     

Effect of carbon fiber surface functional groups on the mechanical properties of carbon-carbon composites with HTT

The present investigation describes the quantitative measurement of surface functional groups present on commercially available different PAN based carbon fibers, their effect on the development of interface with resol-type phenol formaldehyde resin matrix and its effect on the physico-mechanical properties of carbon-carbon composites at various stages of heat treatment. An ESCA study of the carbon fibers has revealed that high strength (ST-3) carbon fibers possess almost 10% reactive functional groups as compared to 5.5 and 4.5% in case of intermediate modulus (IM-500) and high modulus (HM-45) carbon fibers, respectively. As a result, ST-3 carbon fibers are in a position to make strong interactions with phenolic resin matrix and HM-45 carbon fibers make weak interactions, while IM-500 carbon fibers make intermediate interactions. This observation is also confirmed from the pyrolysis data (volume shrinkage) of the composites. Bulk density and kerosene density more or less increase in all the composites with heat treatment up to 2600 °C. It is further observed that bulk density is minimum and kerosene density is maximum upon heat treatment at 2600 °C in case of ST-3 based composites compared to HM-45 and IM-500 composites. It has been found for the first time that the deflection temperature (temperature at which the properties of the material start to decrease or increase) of flexural strength as well as interlaminar shear strength is different for the three composites (A, B and C) and is determined by the severity of interactions established at the polymer stage. Above this temperature, flexural strength and interlaminar shear strength increase in all the composites up to 2600 °C. The maximum value of flexural strength at 2600 °C is obtained for HM-45 composites and that of ILSS for ST-3 composites.     

Pulse study of methane partial oxidation to syngas over SiO2-supported nickel catalysts

Methane was pulsed over pure CuO and NiO as well as Cu/La₂O₃ and Ni/La₂O₃ catalysts at 600° C. Results indicate that the mechanisms for methane activation over copper and nickel are quite different. Over CuO, methane is converted to CO₂ and H₂O, most likely via the combustion mechanism; whereas metallic copper does not activate methane. Over NiO in the presence of metallic nickel sites, methane activation follows the pyrolysis mechanism to give CO, CO₂, H₂ and H₂O. Similar results were obtained over the Cu/La₂O₃ and Ni/La₂O₃ catalysts. XRD investigations indicate that copper and nickel existed as CuLa₂O₄ and LaNiO₃ respectively in the La₂O₃-supported catalysts. The effect of La₂O₃ on the activation of methane is discussed.     

Two-Dimensional Whisker Percolation in Ceramic Matrix–Ceramic Whisker Composites

A computer model that treats ceramic-powder matrix–ceramic whisker composites as a percolative network of whiskers has been developed. The model calculates the critical fraction of whiskers at the percolation threshold for a two-dimensional random network of whiskers. The computed critical fraction was found to display an inverse dependence on whisker aspect ratio. In addition, the computed critical fraction (27 vol% for a whisker aspect ratio of 7) agreed well with the zero-shrinkage whisker fraction of 30 vol% in the densification of a colloid-pressed alumina–silicon carbide composite that exhibited a two-dimensional orientation of such whiskers.     

In Situ Synthesis and Microstructures of Tungsten Carbide-Nanoparticle-Reinforced Silicon Nitride-Matrix Composites

A W₂C-nanoparticle-reinforced Si₃N₄-matrix composite was fabricated by sintering porous Si₃N₄ that had been infiltrated with a tungsten solution. During the sintering procedure, nanometer-sized W₂C particles grew in situ from the reaction between the tungsten and carbon sources considered to originate mainly from residual binder. The W₂C particles resided in the grain-boundary junctions of the Si₃N₄, had an average diameter of ∼60 nm, and were polyhedral in shape. Because the residual carbon, which normally would obstruct sintering, reacted with the tungsten to form W₂C particles in the composite, the sinterability of the Si₃N₄ was improved, and a W₂C–Si₃N₄ composite with almost full density was obtained. The flexural strength of the W₂C–Si₃N₄ composite was 1212 MPa, ∼34% higher than that of standard sintered Si₃N₄.     

Impregnation of X Zeolite with Alkaline Hydroxide During the Synthesis

Enhancement of the basic properties of the X zeolite with FAU framework has been carried out during synthesis, without further treatment such as ion-exchange or impregnation. Control of the washing stage enables retention of the optimum amount of alkaline hydroxides, which increases the basic catalytic activity of X zeolite in the alkylation of toluene. This alkaline hydroxides neither affect the FAU framework nor the silicon/aluminium molar ratio of the X zeolite. The optimum (Na + K)/Al molar ratio of the improved catalyst was 1.06 corresponding to a washing volume of 200 mL. This X zeolite presented better catalytic activity than a cesium-zeolite prepared by ion-exchange. The presence of hydroxysodalite impurity in the X zeolite increased the amount of impregnated alkaline hydroxides but not the catalytic activity. The present study shows that it is possible to increase the basic properties of the X zeolite directly in the synthesis process.     

幽门螺杆菌过氧化氢酶基因克隆及表达

目的 克隆幽门螺杆菌(Helicobacter pylori,HP)过氧化氢酶(katA)基因并在大肠杆菌中进行表达。方法 采用PCR扩增幽门螺杆菌katA全长基因,将其克隆入pET-11c载体中,经测序证实后,在大肠杆菌中进行表达,产物用Western blot检测其抗原性并进行N末端氨基酸的测序。结果 幽门螺杆菌katA基因全长1 518bp,编码氨基酸505个。在BL21(DE3)中的表达量约占细菌总蛋白的24.9％,表达产物经SDS-PAGE显示其相对分子质量与软件预测结果 58 000相符,N末端5个氨基酸测序结果与Hp中天然的katA完全一致,经Western blot检测可被 Hp全菌抗血清识别。结论 katA能在大肠杆菌中进行高效表达,具有良好的免疫反应性,可望为研究 Hp的致病机理、实验诊断及亚单位疫苗等提供充足的katA原材料。     

真空辅助成型工艺(VARI)研究

VARI在低成本成型工艺中起着很重要的作用，本文将介绍它的特点、制造、性能以及在国内外的应用。     

B113-2型低汽气比CO高温变换催化剂的研制

介绍了B113-2型低汽气比CO高温变换催化剂的研制方法及其特点。实验室测试表明,B113-2型催化剂具有堆密度低、运行强度高、选择性好、抗沸水性能优、本体含硫低及低温活性好等优点。