等温脉冲自由射流压力场动态特性的实验研究

针对冶金工业过程脉冲燃烧及脉冲流技术所进行研究的基础部分,借助于计算机辅助信号分析手段,运用湍流统计理论,对等温脉冲自由射流压力场动态特性进行了系统的实验研究。实验的Re范围为19486～93936,st范围为0～0.057,所对应的射流脉冲频率为0～25Hz。研究结果表明;脉冲射流极大地提高了射流区压力波动水平,任何受气体的动量、热量和质量传递制约的工业过程均可望通过适当地采用脉冲流技术加以强化.     

Oxidation of methane in a wide range of pressures and effect of inert gases

The analysis of methane oxidation in a wide range of pressures (0.05–10 atm) demonstrates that the efficiency of CH₃ radicals recombination is of great importance for high selectivity of C₂ hydrocarbons formation. The relative efficiency of different “colliders” assisting the stabilization of exited C₂H*₆ molecules increases in the series: solid surface> Ar> He. The increase of the overall reaction rate upon increasing pressure of the inert gases in the case of catalysts having a higher surface area and more developed pore structure is likely due to the contribution of the surface-induced chain reaction in the volume of pores.     

Influence of the surface conditions on permeation in the deuterium–MANET system

The condition of the surfaces is of crucial importance for the deuterium permeation through materials. In this work a study of the surface constants for the adsorption (σk₁) and release (σk₂) of deuterium under different surface conditions on the martensitic steel DIN 1.4914 (MANET) has been carried out. The growth of an oxide surface layer (Cr₂O₃) of about 25–30 nm in a MANET sample, heat treated in an oxidizing environment, compared to the bare MANET that have a ‘natural' oxide of about 5 nm has provoked a reduction of both the permeation rate and the recombination coefficient (about 3 orders of magnitude). In addition, the permeation governing process has changed from diffusion-limited to surface-limited. The measurements of the permeation rate of deuterium were performed by a gas-phase permeation technique over the temperature range 574–746 K and for deuterium driving pressures in the range from 3 to 10⁵ Pa.     

氢对2.25Cr-1Mo压力容器用钢力学性能影响

基于试样高温高压釜充氢方法 ,研究了氢对 2 2 5Cr 1Mo压力容器用钢力学性能的影响。对充氢前后的试样进行了拉伸和CVN冲击试验 ,结果表明 ,氢对 2 2 5Cr 1Mo钢的拉伸力学性能和冲击韧性影响不显著。     

Effects of electrode arrangement and pressure on synthesis of diamond films by arc discharge plasma jet chemical vapor deposition

The setup and deposition conditions of electrode arrangement and pressure have been studied to synthesize diamond films at high growth rate on wide area efficiently by arc discharge plasma jet chemical vapor deposition. An apparatus has been used in which four plasma torches, one is used for cathode and the others for divided anodes, are arranged and the positions of these torches are changeable. Growth rate, deposition area and thickness of diamond films have increased with changing the electrode arrangements without improvement of thickness variation. Maximum growth rate of our apparatus has occurred at the pressure of 6.7 kPa and diamond films that have less variations of quality and surface roughness have been synthesized at lower pressure during deposition. Moreover, a high conversion rate, which is the ratio of carbon atoms that form diamond in supplied methane gas, of 16% has been obtained at the pressure of 6.7 kPa and methane concentration of 2%.     

中型孔径小梯段露天石方深孔水压爆破

介绍了一种石方开挖新技术－－露天石方深孔水压爆破技术。用试验的方法，通过和常规石方爆破进行类比，从而研究了此项新技术在中型孔径小梯段应用条件下的各种爆破参数，并进行了定性和定量分析，得到了一些初步的结论。     

压力容器材料质量控制的几个重要环节

针对压力容器材料方面存在的问题,从设计、采购、检验、制造等环节进行了分析,根据实际情况确定材料的质量控制要点。材料使用前要通过各种检测手段,判断材料的真实性,确保所用材料合格;并应从设计、选材、采购、计划、填报内容和选择可靠的供应方等方面加以控制,确保材料的正确使用,为压力容器产品的材料控制提供借鉴。     

应力、强度呈非正态分布时可靠度公式的推导

介绍一种当应力、强度呈非正态分布时的可靠度的计算方法,以用来进行机械可靠性设计,并以一个地震载荷的直立压力容器为例加以说明。     

沙南油田高效开采技术政策研究

在该油藏大量动静态研究成果的基础上 ,根据国内外相似油田开发实例 ,运用数理统计、渗流力学、油藏工程及数值模拟的方法 ,结合矿场实际资料 ,对油藏进行天然能量、井网密度、注水系统、采油系统、最终采收率等参数的研究 ,获得了油田高效开发的技术界限。     

Hastelloy B-2封头加工

HastelloyB - 2是哈氏合金中最难制造和加工的镍基合金之一 ,尤其是化工容器中的封头 ,其制作工艺过程较复杂 ,这种材料较昂贵 ,目前在国内化工行业应用很少 ,因此掌握这种材料的制造技术具有重要的意义 ,本文阐述了HastelloyB - 2封头的坯料焊接、旋压成形、固溶处理及酸洗等工艺过程。