Effect of Enameling on the Strength and Dynamic Fatigue of Soda–Lime–Silica Float Glass

The effect of a glass enamel coating on the strength and fatigue behavior of float glass was investigated. Commercially available enamel that was comprised of Cu₂Cr₂O₄ pigment particles in a bismuth-zinc borosilicate glass matrix was applied to a soda–lime–silica float glass via screen printing, followed by fusion at elevated temperature. Strengths of the enameled specimens were evaluated in biaxial flexure using a ring-on-ring (ROR) test geometry, and the data were analyzed using a conventional two-parameter Weibull distribution. Enameling was found to significantly degrade the strength of the float glass. There was no statistical difference in the characteristic strengths of samples enameled on the air side (66 MPa) compared with samples enameled on the tin side (61 MPa) of the float glass. Fractographic analysis revealed that the failures in the enameled float glass samples initiated at pores and pigment aggregates in the enamel, whereas failures in float glass samples initiated solely from surface flaws. Dynamic fatigue tests were performed on enameled float glass and indented float glass samples to determine the effect of the enamel on the stress corrosion behavior of the enameled components. There was no statistically significant difference between the stress corrosion exponents for the float glass and enameled float glass specimens.     

Characterization of poly(vinyl pyrrolidone‐co‐isobutylstyryl polyhedral oligomeric silsesquioxane) nanocomposites

Poly(vinyl pyrrolidone‐co‐isobutyl styryl polyhedral oligomeric silsesquioxane)s (PVP–POSS) were synthesized by one‐step polymerization and characterized using FTIR, high‐resolution ¹H‐NMR, solid‐state ¹³C‐NMR, ²⁹Si‐NMR, GPC, and DSC. The POSS content can be controlled by varying the POSS feed ratio. The T_g of the PVP–POSS hybrid is influenced by three main factors: (1) a diluent role of the POSS in reducing the self‐association of the PVP; (2) a strong interaction between the POSS siloxane and the PVP carbonyl, and (3) physical aggregation of nanosized POSS. At a relatively low POSS content, the role as diluent dominates, resulting in a decrease in T_g. At a relatively high POSS content, the last two factors dominate and result in T_g increase of the PVP–POSS hybrid. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2208–2215, 2004     

Viscoelastic Effects in a Phosphate Glass-Metal Seal

A family of phosphate glasses has been developed with thermal expansion behavior in the elastic range that nearly matches the response of 304 stainless steel. Attempts to make concentric pin-shell seals consistently have yielded fractures between 400° and 300°C during cooling. Elastic stress analyses which neglect glass transitional behavior and utilize constant glassy ("elastic") thermal expansion coefficients predict a residual stress state that is compressive. However, viscoelastic computations which include the effects of structural relaxation during glass transtion show that tensile stresses sufficient to cause failure arise during cooldown of the seal.     

浅谈我公司0.6mm超薄浮法玻璃生产

我公司在成功生产出1.1mm超薄浮法玻璃的基础上,又对原料、熔化、成型、退火等影响超薄玻璃质量的各种因素进行了全方位的技术攻关,成功生产出0.6mm超薄浮法玻璃,填补了国内空白.     

Decision support in machine vision system for monitoring of TFT-LCD glass substrates manufacturing

This study addresses classification methodology for the automatic inspection of a range of defects on the surface of glass substrates in thin film transistor liquid crystal display glass substrate manufacturing. The proposed methodology consisted of four stages: (1) feature extraction by calculating the wavelet co-occurrence signature from the substrate images, (2) handling of imbalanced dataset using the Synthetic Minority Over-sampling TEchnique (SMOTE), (3) reduction of the feature's dimension by principal component analysis, and (4) finally choosing the best classifier between three different methods: Classification And Regression Tree (CART), Multi-Layer Perceptron (MLP) and Support Vector Machine (SVM). In training the SVM and MLP classifiers, the simulated annealing algorithm was used to obtain the optimal tuning parameters for the classifiers. From the industrial case study, the proposed feature extraction algorithm could remove the defect-irrelevant image features and SMOTE increased the accuracy of all three methods. Furthermore, the optimized SVM and MLP models were more accurate than the CART model whereas a higher accuracy of 89.5% was observed for the proposed SVM model.     

聚甲醛的强韧化改性研究

分别以热塑性聚氨酯和短切玻璃纤维为增韧剂和增强剂，以传统的共混方式，对聚甲醛进行了增韧和增强改性研究，获得了强度和韧性同时提高的改性材料。     

玻璃防雾技术的研究进展

本文简单介绍了玻璃表面防雾的几种基本原理,综述了国内外以防雾为目的的玻璃表面改性的研究进展,并对该技术的发展趋势做了论述。     

Contraction stress build‐up of anisotropic conductive films (ACFs) for flip‐chip interconnection: Effect of thermal and mechanical properties of ACFs

The important mechanical mechanism for the electrical conduction of anisotropic conductive films (ACFs) is the joint clamping force after the curing and cooling processes of ACFs. In this study, the mechanism of shrinkage and contraction stress and the relationship between these mechanisms and the thermomechanical properties of ACFs were investigated in detail. Both thickness shrinkages and modulus changes of four kinds of ACFs with different thermomechanical properties were experimentally investigated with thermomechanical and dynamic mechanical analysis. Based on the incremental approach to linear elasticity, contraction stresses of ACFs developed along the thickness direction were estimated. Contraction stresses in ACFs were found to be significantly developed by the cooling process from the glass‐transition temperature to room temperature. Moreover, electrical characteristics of ACF contact during the cooling process indicate that the electrical conduction of ACF joint is robustly maintained by substantial contraction stress below T_g. The increasing rate of contraction stresses below T_g was strongly dependent on both thermal expansion coefficient (CTE) and elastic modulus (E) of ACFs. A linear relationship between the experimental increasing rate and E × CTE reveals that the build‐up behavior of contraction stress is closely correlated with the ACF material properties: thermal expansion coefficient, glassy modulus, and T_g. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2634–2641, 2004     

氮化硅基陶瓷连接技术的研究进展

陶瓷连接技术是结构陶瓷实用化的有效手段，焊料成分对连接体的性能具有决定性作用。本文主要从焊料成分选择的角度，总结了氮化硅基陶瓷连接技术的发展现状；并重点讨论了陶瓷／玻璃复合焊料在β-Sialon陶瓷连接中的应用。     

循环经济与浮法玻璃工艺的发展

在玻璃行业贯彻循环经济的理念,改进工艺思想和方法,节约资源,降低消耗,提高资源利用率,减少污染物排放,是我们对后人应负的责任和对地球应尽的义务。