矿井串联系统模糊可靠性理论的研究

矿井系统不仅具有随机性，而且同时也具有模糊性，在系统分析与设计过程中应同时考虑这两种不确定性因素的影响。文中提出了模糊故障、模糊功能、系统模糊运营状态和广义可靠度等概念，并在此基础上提出了求单元及串联系统的生产能力、营运费用、应急维修费用、修理时间和广义可靠度等指标的方法，建立了使系统平均生产能力最大的系统最优运营策略的数学模型。     

Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

Dynamic analysis of the NPP pressure sensor system

The aim of the work was to develop on-line methods of control and diagnostics of pressure sensors at a NPP. The analysis was carried out along two lines:

1. i) The detection system including the sensor itself was modeled theoretically to obtain and study its transfer function, and to establish correspondence between the spectral characteristics of the pressure signal.

2. ii) The numerical processing of the signal using the AR technique to reconstruct the transfer function and evaluate the system's response, to a step impulse, as well as the spectral analysis. The hydraulic model presented indicate that the spectral lines observed at 10 Hz are due to longitu-dinal oscillations of water in the system branches, while the response time of the detection system is effectively the time of signal retardation in the porous ceramic diaphragms of the δ-cell of the sensor itself.

     

智能化红外焊缝检测仪的实时信号自相关分析

详细介绍了在改进红外焊缝检测仪的过程中实时信号的一种抗干扰方法－－自相关方法。重点离自相关方法的数学模型，软件框图及设计思想，并给出了实验结果。     

Stability analysis and antiwindup design of uncertain discrete-time switched linear systems subject to actuator saturation

This paper investigates the stability analysis and antiwindup design problem for a class of discrete-time switched linear systems with time-varying norm-bounded uncertainties and saturating actuators by using the switched Lyapunov function approach.Supposing that a set of linear dynamic output controllers have been designed to stabilize the switched system without considering its input saturation,we design antiwindup compensation gains in order to enlarge the domain of attraction of the closed-loop system in the presence of saturation.Then,in terms of a sector condition,the antiwindup compensation gains which aim to maximize the estimation of domain of attraction of the closed-loop system are presented by solving a convex optimization problem with linear matrix inequality(LMI)constraints.A numerical example is given to demonstrate the effectiveness of the proposed design method.     

Structural analysis of Au/Mg(OH)2 during deactivation by Debye function analysis

Using a Debye function analysis, the presence of icosahedral and face centered cuboctahedral gold in a 1 1 ratio has been found in freshly prepared Au/Mg(OH)₂ catalyst. The results support earlier studies which suggest the icosahedral form to be more stable at small nanometer sizes. Interactions between the gold and the Mg(OH)₂ support appear to be weak, with the gold rapidly coagulating over a period of three months. Re-analysis of the aged sample shows the gold to be mainly in the form of truncated decahedra.     

进口刀盘圆环失效原因及改进

首先从材料力学角度分析了抚顺石化公司干法腈纶装置原进口切断刀盘圆环失效的原因 ,认为此种切断刀盘圆环系二维增强结构层压板 ,层间没有纤维增强 ,需要解决由二维增强向三维增强的过渡。给出了改进办法 ,寻求到三维增强的替代材料。同时介绍了机械加工测试及在线实验     

光学镜头调制传递函数的测试

为了定量、客观、全面地评价光学镜头的像质,介绍了光学镜头调制传递函数的测试。先简要叙述了测试的原理,并给出计算公式;然后介绍了测试步骤,其中包括固定、穿轴、测试中心视场和测试轴外视场;最后介绍了测试时的注意事项,包括对测试工装的要求、对测试平面的要求和正、负轴外视场测试值相差较大时的处理办法。     

民间传统御寒器具——火桶设计研究

＂火桶＂是南方传统的御寒器物,它具有造型简单,取材方便,功能实用多样的特点,凝聚了民间朴素造物的思想。同时,火桶所具有着深厚的人文特点和文化内涵。文章以黔东南镇远地区民间火桶为例,分析其形态、结构、功能及人机关系等内容,探究民间造物的设计巧思。     

Evaluating the 1931 CIE color‐matching functions

The use of colorimetry within industry has grown extensively in the last few decades. Central to many of today's instruments is the CIE system, established in 1931. Many have questioned the validity of the assumptions made by Wright¹ and Guild,² some suggesting that the 1931 color‐matching functions are not the best representation of the human visual system's cone responses. A computational analysis was performed using metameric data to evaluate the CIE 1931 color‐matching functions as compared to with other responsivity functions. The underlying assumption was that an optimal set of responsivity functions would yield minimal color‐difference error between pairs of visually matched metamers. The difference of average color differences found in the six chosen sets of responsivity functions was small. The CIE 1931 2° color‐matching functions on average yielded the largest color difference, 4.56 ΔE. The best performance came from the CIE 1964 10° color‐matching functions, which yielded an average color difference of 4.02 ΔE. An optimization was then performed to derive a new set of color‐matching functions that were visually matched using metameric pairs of spectral data. If all pairs were to be optimized to globally minimize the average color difference, it is expected that this would produce an optimal set of responsivity functions. The optimum solution was to use a weighted combination of each set of responsivity functions. The optimized set, called the Shaw and Fairchild responsivity functions, was able to reduce the average color difference to 3.92 ΔE. In the final part of this study a computer‐based simulation of the color differences between the sets of responsivity functions was built. This simulation allowed a user to load a spectral radiance or a spectral reflectance data file and display the tristimulus match predicted by each of the seven sets of responsivity functions. © 2002 Wiley Periodicals, Inc. Col Res Appl, 27, 316–329, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.10077