THERMODYNAMICS AND PHASE EQUILIBRIUM OF Cu－Y－O，Cu－Y－S，Cu－Y－O－S LIQUID SOLUTIONS

ＴＨＥＲＭＯＤＹＮＡＭＩＣＳＡＮＤＰＨＡＳＥＥＱＵＩＬＩＢＲＩＵＭＯＦＣｕ－Ｙ－Ｏ，Ｃｕ－Ｙ－Ｓ，Ｃｕ－Ｙ－Ｏ－ＳＬＩＱＵＩＤＳＯＬＵＴＩＯＮＳ￥Ｄｕ，Ｔｉｎｇ；Ｌｉ，Ｇｕｏｄｏｎｇ（ＣｅｎｔｒａｌＩｒｏｎａｎｄＳｔｅｅｌＲｅｓｅａｒｃｈｉｎｓｔｉｔ...     

Intermetallic phase formation in directionally solidified Al−Si−Fe alloy

The present study has been undertaken to better understand the solidification behavior of Al−Si−Fe alloys containing 7wt.% Si and 0.9wt.% Fe, with particular regard to the formation of phase during controlled solidification and influence of growth rates on intermetallic phase selection. The alloys studied were Al-7Si-0.9Fe alloys, which were produced by a modified Bridgman solidification arrangement. These alloys were solidified unidirectionally with different growth rates (1–30mm/min). The solidified microstructure of these alloys consists of the growth of primary aluminum and multiple second phase reactions.     

基于嵌入式电脑横机控制系统

本文分析了电脑横机的结构与功能,提出了基于嵌入式的电脑横机控制系统,采用了S3C2410为主处理芯片,通过FPGA扩展端口,系统读取织物花型数据,控制横机各个动作子系统来完成编制动作,该电脑横机控制系统与传统电脑横机系统相比较,工作效率高,可移植性强。     

S1000D标准下数据模块发布样式的研究

为促进S1000D标准在以信息化为中心的综合保障技术中的应用,提高装备技术文档制作和发布的正确性和效率,文章研究了S1000D标准对PDF格式发布样式的规定,分析了XSL的工作原理和各类技术信息的Schema模式,利用XSL-FO技术编写了把数据模块发布成PDF格式的XML文档,通过XMLSPY实现了技术文档的发布;通过实例展示了实现规定的发布样式的关键技术以及从数据模块到PDF发布样式的显示效果,证明了所用方法的正确性与实用性,为实现S1000D标准下的技术信息发布提供了新的可行方法.     

TYPHOON PROCESS AND ITS IMPACT ON THE SURFACE CIRCULATION IN THE NORTHERN SOUTH CHINA SEA

A severe typhoon Utor,occurring between July 3 and 8,2001,brought heavy rainfall,strong wind and storm surge.Utor was responsible for tremendous destruction and economic losses in Philippines,Taiwan and Guangdong.An air-sea model system (MM5 and Princeton Ocean Model(POM))was built to simulate meteorological dynamics and ocean circulation in the South China Sea(SCS).In the POM the output of MM5 was used as the input data.With an increased number of vertical levels,a high-resolution planetary boundary layer scheme and updated landuse/vegetation data,the accuracy of computing wind,temperature and other meteorological fields are improved in near surface and upper levels in MM5 simulations.The simulated trajectory and wind speed of Utor are close to the observed results.The simulated distribution of rainfall is accorded well with measured data in the Pearl River Delta(PRD)area.At different meteorological stations in Hong Kong,the wind,temperature and sea surface pressure are well simulated.The simulated ocean surface current and surface temperature fields have an obvious rightward-biased response to the typhoon Utor,and the maximum velocity and the lowest temperature region appear in the 30 km of the right side of the typhoon track.The typhoon Utor could make the water 50m under the surface ocean unwell to surface and the ocean surface temperature decrease by about 2°C.     

漳河水库入库径流序列变化趋势分析

依据漳河水库1963-2008年入库径流资料,采用R/S分析方法和M ann-Kendall参数秩次相关检验法对其未来入库径流变化趋势进行了分析。结果表明:①水库流域未来径流量将呈缓慢下降的趋势,且未来1月和7月的径流量变化趋势的随机性成份可能很大,应采取必要对策和措施,以应对未来可能出现的干旱或暴雨洪涝等自然灾害。②1995年为突变点,前后两个系列的统计特征值均具有明显的差异,已经不符合"一致性"的要求。③对于20世纪70~80年代的持续枯水期,应理解为这只是其径流丰枯周期变化中的一个枯水期。④流域人类活动日趋频繁,使得流域下垫面条件发生了较大的变化,对入库径流量有较大的影响。     

利用SQLServer实现局域网软件自动升级

介绍了一种只利用SQLServer,无需其他专门服务器就可以轻松实现的局域网软件自动升级方法。     

Direct 5-axis tool-path generation from point cloud input using 3D biarc fitting

In reverse engineering, geometrical information of a product is obtained directly from a physical shape by a digitizing device. To fabricate the product, manufacturing information (usually tool-path) must be generated from a CAD model. The data digitized must be processed and in most cases, a surface model is constructed from them using some of the surface fitting technologies. However, these technologies are usually complicated and the process for constructing a surface patch from a massive digitizing data is time-consuming. To simplify the process for getting tool-path information, a simple algorithm is proposed in this paper. The algorithm is used to generate a 5-axis machining tool-path. Instead of implementing any complicated surface fitting techniques, a direct method is proposed for constructing three-dimensional (3D) triangular mesh from the digitizing data with the mesh points considered as the tool contact locations. Depending on the locations of the points digitized, a decimation procedure is applied such that some of the digitizing data will be filtered out. Then, the tool axis orientations which must be determined in 5-axis tool-path are calculated and the tool center locations are determined accordingly. A 3D biarc fitting technique is applied for all the tool center locations so that a complete 5-axis tool-path is obtained.     

基于DS18B20的温度测量系统

以温度的采集处理和显示为目的,研究了基于AT89S51单片机的温度检测及显示的设计方法,给出了硬件和软件系统设计,包括温度传感器芯片的选取、单片机与温度传感器的接口设计以及实现温度采集和数据传输的软件设计。该系统结构简单,成本较低,体积小,测温范围为-55℃～125℃,可以应用在很多温度检测领域。     

西门子数字输入中断模块的应用研究

介绍了如何在STEP7中配置西门子数字输入中断模块,如何进行软件中断处理,对中断标志位识别和常见编程处理给出了详细的描述.