Trade and spatial economic interdependence

Abstract. Regional scientists have had a long fascination with spatial economic interdependence, initially stimulated by the development of a suite of models in Isard (1960). In recent years there have been two major developments; first, a movement towards greater integration in model development not only with large-scale models, but also with careful attempts to make more components of the system endogenous. The second development has been the pursuit of greater integration than in earlier studies between theory and applied regional economic modelling, most notably in the area of trade and economic development. We explore some of the recent developments of this latter approach and provide an assessment of the current state-of-the art of some future opportunities.     

TFT有源矩阵α－Si∶H薄膜PECVD淀积工艺研究

分析了α－Ｓｉ∶Ｈ薄膜的质量和厚度对α－Ｓｉ∶ＨＴＦＴ关键性指标的影响，深入、详细地讨论了其ＰＥＣＶＤ淀积工艺，并在实验的基础上确定了最佳淀积工艺参数，从而获得了高性能的７５ｍｍ３７２×２７６像素α－Ｓｉ∶ＨＴＦＴ有源矩阵     

TMS320F240片内FLASH串行口编程

本文介绍了一种对TMS320F240利用串行口进行编程的方法,此方法相对于TMS320F240研发人员普遍使用XDS510仿真器编程的方法,具有设备简单、操作方便和运行可靠等特点,尤其适合现场编程.     

Evaluation of effect of hydrogen on toughness of Zircaloy-2 by instrumented drop weight impact testing

Hydride-assisted degradation in fracture toughness of Zircaloy-2 was evaluated by carrying out instrumented drop-weight tests on curved Charpy specimens fabricated from virgin pressure tube. Samples were charged to 60 ppm and 225 ppm hydrogen. Ductile-to-brittle-transition behaviour was exhibited by as-received and hydrided samples. The onset of ductile-to-brittle-transition was at about 130 °C for hydrided samples, irrespective of their hydrogen content. Dynamic fracture toughness (K_ID) was estimated based on linear elastic fracture mechanics (LEFM) approach. For fractures occurring after general yielding, the fracture toughness was derived based on equivalent energy criterion. Results are supplemented with fractography. This simple procedure of impact testing appears to be promising for monitoring service-induced degradation in fracture toughness of pressure tubes.     

首钢6H3C单机架可逆式薄板冷轧机组技术特点

首钢6H3C单机架可逆式冷轧机组是目前世界上第一套通过中间辊交叉进行板型控制的轧机．也是世界上第一套投入工业生产的6H3C轧机。本文介绍了该机组的工艺、设备参数，技术特点，电气设备及自动化控制及生产状况，并提出了该机组可能存在的问题。     

浅谈下一代网络（NGN）

计算机网络的发展日新月异。下一代计算机网络（NGN）的探讨、研究已经成为当前的潮流。下一代网络是目前电信、互联网运营商和设备厂商都在讨论的热点技术，国内外许多网络运营商都在探讨，并正在或考虑建设试验网进行更深入的研究。本文介绍了NGN的定义、主要特点、分层结构和关键技术。     

两步法合成2-氨基-5-硝基苯酚

以邻氨基苯酚和尿素为原料,将传统环合-硝化-水解三步法工艺改为环合硝化-水解两步法合成了2-氨基-5-硝基苯酚(ANP);研究了影响环合硝化反应和水解反应的因素;优化了反应条件。环合硝化反应的最优条件为:n(邻氨基苯酚)∶n(尿素)=1.00∶1.20、环合时间6h、硝酸用量40.2g、硫酸用量20g、硝化时间3h、硝化温度70℃,在此条件下中间产物6-硝基苯并噁唑酮的收率为90.2%;水解反应的最优条件为:体积分数95%的乙醇为溶剂、n(6-硝基苯并噁唑酮)∶n(氢氧化钠)=1.0∶3.3、水解温度80℃、水解时间15h,在此条件下ANP收率为81.2%。两步反应ANP的总收率为73.2%。对产品进行了元素分析和红外光谱表征,确认终产物为ANP。该方法成本低,ANP总收率高,溶剂可回收,三废量少。     

Characteristics and classification of high-current fault arcs on distribution systems

When a fault occurs on transmission or distribution systems due to lightning or overvoltage, often an arc discharge occurs at the fault point. The arc discharge, which is caused by a fault current, has a high current, high temperature, strong light emission, etc., thus it sometimes causes heavy damages to electric power equipment. The arc discharge is influenced by the conditions around the arcs, i.e., gas, insulation materials, gap length, weather, etc. Also, the arc voltage along the arc column indicates the characteristics of the arc. If the voltage waveforms of the arcs caused by the fault on transmission or distribution systems are classified, it is possible to find the location and the equipment where the fault occurred. In this paper, the arc voltage data in 6-kV class XLPE cables and 6-kV class overhead lines are analyzed and an artificial neural network method is applied to classify the arc voltage waveforms. The results obtained from the six artificial neural networks developed show that the artificial neural network method is effective for classification of arc voltage waveforms if adequate input parameters are selected.