Effect of Rare Earth Element Cerium on Mechanical Properties and Morphology of TiN Coating Prepared by Arc Ion Plating

TiN coatings were deposited on polished substrates of W18Cr4V high speed steel by means of vacuum arc ion plating. The effect of cerium on adhesion between TiN coating and substrate was studied. The microstructures and composition of TiN coatings were also investigated by means of scanning electron microscope (SEM), Auger electron spectroscopy (AES), and X-ray diffraction (XRD) technique. It was found that cerium is an effective modifying agent and the addition of suitable amount of cerium to TiN coatings can produce relatively excellent properties such as micro-hardness, wear resistance, oxidation resistance and porosity. The experimental results show that the added cerium in TiN coatings makesa contribution to form the preferred direction along with a (111 ) or (222) close packed face, which may be one of the reasons that improves some properties mentioned above.     

热处理对Ti-25V-15Cr-2Al-2Mo-0.2C合金组织稳定性的影响

研究了热处理对Ti-25V-15Cr-2A1-2Mo-0.2C阻燃β钛合金组织稳定性的影响。结果表明，高温固溶并直接时效处理导致合金β基体上析出较多的α相沉淀，尤其在随后的热暴露组织中形成了恶化合金塑性的连续晶界α膜。然而，若在时效前再进行一次低温固溶处理则可明显减少α相的析出数量，合金的热稳定性因此而得到显著改善。     

大塑性变形制备纳米结构金属

细化晶粒是改善材料性能的有效手段，传统的压力加工技术(如轧制、挤压、拉拔和锻造等)可以细化晶粒(微米量级)。纳米结构金属由于具有很小的晶粒尺寸(20-500nm)和独特的缺陷结构，从而表现出优异的物理—力学性能。大塑性变形(SPD)具有将铸态粗晶金属的晶粒细化到纳米量级的巨大潜力，近年来已引起人们的极大关注。介绍了4种大塑性变形制备纳米结构金属的方法、原理、变形特点及应用，分析了纳米结构金属的强度和超塑性变形特征，以及当前研究中存在的主要问题，并对大塑性变形技术的应用前景进行了展望。     

Femtochemistry of Guest Molecules Hosted in Colloidal Zeolites

The ultrafast deprotonation of 2‐(2′‐hydroxyphenyl)benzothiazole (HBT) hosted in nanometer‐sized FAU and MFI zeolites is reported. Samples are prepared via in‐situ incorporation of HBT in the precursor colloidal solutions resulting in the formation of nanometer‐sized zeolites under hydrothermal treatment. The diameter of the zeolite particles formed in the crystalline suspensions is determined by dynamic light scattering and high‐resolution transmission microscopy to lie in the range 40–100 nm. It is shown that the HBT loading does not influence the degree of the zeolite crystallinity but does change the size and the morphology of the individual zeolite nanoparticles. Colloidal suspensions containing the crystalline nanoparticles are well suited for optical investigations since they are sufficiently transparent and clear. The photochemical properties of the HBT guest in the zeolite‐host systems are studied with femtosecond transient transmission spectroscopy. Depending on the acid–base properties either the enol or the keto tautomer of HBT is found to be hosted in the internal voids of the zeolites; upon UV excitation, the HBT‐keto tautomer is converted to the enol form in both MFI‐ and FAU‐type hosts. The HBT photoconversion takes place via an ultrafast deprotonation within 1.5 ps as detected by femtosecond transient absorption spectroscopy.     

Water‐Stable,Magnetic Silica–Cobalt/Cobalt Oxide–Silica Multishell Submicrometer Spheres

A method to produce monodisperse magnetic composite spheres with diameters from less than 100 nm to more than 1 μm in water solution is reported. The spheres consist of a dielectric silica core and a cobalt/cobalt oxide shell which can be protected from further oxidation with an outer shell of silica or, alternatively, they can be covered with the polymer polyvinylpyrrolidone as a stabilizer. The formation of a uniform magnetic shell proceeds with the adsorption of metallic cobalt seeds, produced by the reduction of cobalt chloride with sodium borohydride, on a self‐assembled layer of polyelectrolytes on the silica core. In the second step, an outer silica shell can be formed by the hydrolysis and condensation of (3‐aminopropyl)trimethoxysilane and tetraethoxysilane. The double‐shell composite spheres show excellent sphericity, monodispersity, and a magnetic hysteresis loop at room temperature.     

WC对Cu/WC_P复合材料性能及组织的影响

通过ＷＣ含量对ＷＣ／Ｃｕ复合材料性能的影响，确定了冷压－烧结法制备Ｃｕ／ＷＣ材料的适宜ＷＣ含量为１０ｖｏｌ％左右。并就ＷＣ对该材料组织和再结晶行为的影响进行了有益的探讨。     

叠加能量C^＋注入SiO2薄膜的光致发光特性

首次采用叠加能量离子注入技术制备Ｃ＾＋注入ＳｉＯ２薄膜样品，室温下观测到很强的蓝光发射。通过测量样品的光致发光谱对退火条件的依赖关系，研究了样品的发光特性。对发光机制进行了初步探讨。     

粉末材料中微夹杂缺陷的超声波检验

介绍了用超声波方法检测微夹杂缺陷的一些试验结果，比较了不同频率、不同试验方法检测能力的差异，并通过解剖试验对检出缺陷的性质、尺寸作了比较。     

机械合金化的原理及在磁性材料研究中的应用

介绍了机械合金化的原理和描述机械合金化过程的理论模型。综述了机械合金化在磁性材料研究中的应用，并对目前研究中的存在的问题及发展前景进行了分析。