Capture of Airborne Particulate Using Surface Applied Emulsions: Potential for Postdetonation Dirty Bomb Cleanup

Recent research has proposed the use of asphalt and tall-oil-pitch emulsions for stabilizing radioactive contamination deposited on surfaces in urban areas. The objective of this project was to investigate whether surface applied emulsions could capture airborne radioactive particulate. Laboratory experiments included wind-blown particulate capture studies using an acrylic column and particulate retainment experiments using a wind box capable of producing wind speeds of 96?km/h. A probe methodology was developed to relate particulate retainment to a tack force on the emulsion surface. Experiments were also performed to determine the potential for such emulsions to absorb particulate matter into their emulsion matrix. Tall-oil-pitch emulsions outperformed asphalt emulsions in terms of particulate retention, tack force, and the ability to absorb magnesium silicate. Both tall-oil-pitch and asphalt emulsions were capable of extracting 22–24?g?m?2 of powder from particulate-laden airflow. Tall-oil-pitch emulsions were capable of retaining as much as 5–10% of magnesium silicate powder applied (i.e., retainment densities of 10–20?g?m?2) even after seven?days of curing and after applying 96.5?km/h (60?mph) wind. Tall-oil-pitch emulsions were able to absorb surface-applied magnesium silicate (approximately 0.1–0.2?g of magnesium silicate per 1.0?g of emulsion within three?days) into their emulsion matrix, preventing the magnesium silicate from being exposed to the external environment. Initial results with these five different emulsion formulations suggested particulate capture was feasible. Future emulsion formulations (i.e., longer curing times with greater acid concentrations) should be tested to optimize this postdetonation response strategy.     

Two-Dimensional Physical and Numerical Modeling of a Pile-Supported Earth Platform over Soft Soil

This paper focuses on the mechanisms occurring in a granular earth platform over soft ground improved by rigid piles. Two-dimensional physical model experiments were performed using the Schneebeli’s analogical soil to investigate the load transfer mechanisms by arching and the settlement reduction and homogenization. Experimental outputs are compared to results obtained on a numerical model using a plane strain continuum approach. The impact of the constitutive model complexity to simulate the platform material behavior was first assessed, but no large difference was recorded. As far as the proposed model, which takes the main features of the observed behavior satisfactorily into account, the numerical procedure could be validated and the parametric studies extended numerically. Both approaches of this study underlined the main geometrical and geotechnical parameters which should inevitably be taken into account in a simplified design method, namely the capping ratio, the platform height, and the platform material shear strength.     

Effect of Rare Earth Element Cerium on Mechanical Properties and Morphology of TiN Coating Prepared by Arc Ion Plating

TiN coatings were deposited on polished substrates of W18Cr4V high speed steel by means of vacuum arc ion plating. The effect of cerium on adhesion between TiN coating and substrate was studied. The microstructures and composition of TiN coatings were also investigated by means of scanning electron microscope (SEM), Auger electron spectroscopy (AES), and X-ray diffraction (XRD) technique. It was found that cerium is an effective modifying agent and the addition of suitable amount of cerium to TiN coatings can produce relatively excellent properties such as micro-hardness, wear resistance, oxidation resistance and porosity. The experimental results show that the added cerium in TiN coatings makesa contribution to form the preferred direction along with a (111 ) or (222) close packed face, which may be one of the reasons that improves some properties mentioned above.     

Femtochemistry of Guest Molecules Hosted in Colloidal Zeolites

The ultrafast deprotonation of 2‐(2′‐hydroxyphenyl)benzothiazole (HBT) hosted in nanometer‐sized FAU and MFI zeolites is reported. Samples are prepared via in‐situ incorporation of HBT in the precursor colloidal solutions resulting in the formation of nanometer‐sized zeolites under hydrothermal treatment. The diameter of the zeolite particles formed in the crystalline suspensions is determined by dynamic light scattering and high‐resolution transmission microscopy to lie in the range 40–100 nm. It is shown that the HBT loading does not influence the degree of the zeolite crystallinity but does change the size and the morphology of the individual zeolite nanoparticles. Colloidal suspensions containing the crystalline nanoparticles are well suited for optical investigations since they are sufficiently transparent and clear. The photochemical properties of the HBT guest in the zeolite‐host systems are studied with femtosecond transient transmission spectroscopy. Depending on the acid–base properties either the enol or the keto tautomer of HBT is found to be hosted in the internal voids of the zeolites; upon UV excitation, the HBT‐keto tautomer is converted to the enol form in both MFI‐ and FAU‐type hosts. The HBT photoconversion takes place via an ultrafast deprotonation within 1.5 ps as detected by femtosecond transient absorption spectroscopy.     

WC对Cu/WC_P复合材料性能及组织的影响

通过ＷＣ含量对ＷＣ／Ｃｕ复合材料性能的影响，确定了冷压－烧结法制备Ｃｕ／ＷＣ材料的适宜ＷＣ含量为１０ｖｏｌ％左右。并就ＷＣ对该材料组织和再结晶行为的影响进行了有益的探讨。     

Equipment for Testing Sheet Structural Materials under Biaxial Tension. Part 2. Testing by Biaxial Loading in the Plane of the Sheet

We analyze specific features of the design of equipment used for mechanical testing of sheet structural materials under the conditions of biaxial static, cyclic, or dynamic loading. We propose original solutions of the problems related to the fatigue testing of crosslike specimens performed without using complex hydraulic systems and their dynamic testing carried out by using very simple testing machines for uniaxial tension–compression.     

建材研究的新热点——黄河淤泥沙综合利用进展及前景展望

简要介绍了黄河淤泥沙的特性及相关情况,论述了黄河於泥综合利用研究的进展及主要成果,概述了其工业化开发的现状,分析了其存在的问题,对其发展前景进行了预测。黄河淤泥沙综合利用工作是关系到国计民生、千秋万代的大事,具有重要的现实意义和深远的历史意义。     

Mg-Si基热电化合物的研究现状

重点综述了Mg-Si基热电化合物的基本特性，该体系热电材料的制备方法与掺杂改性的研究进展，并提出了要重点解决的问题。     

Smithsonian Microbeam Standards

This is a short history of the Smithsonian Microbeam Standards; their sources, selection, preparation, and analyses. Fifty-eight minerals, natural glasses, and synthetic samples have been characterized in the past 25 years. During that time, over 750 requests were received for approximately 11 000 individual samples. These reference samples are referred to as the Smithsonian Microbeam Standards.