地下水源热泵含水层水头分布及温度场的模拟分析

为使地下含水层能量更好为实际工程所用,进一步保护地下水空间,通过对地下水源热泵系统地下含水层中渗流场的分析,建立一抽一灌(对井抽灌)系统和一抽两灌系统地下水渗流数值模型,应用数值模拟方法对地下含水层渗流场水头分布及温度场进行模拟分析。结果表明:在相同的运行周期内,一抽两灌系统温度场的影响半径相对较小,并且抽灌井周围的等水头线分布较疏,水头变化缓慢,更利于地下水的回灌。尽量使回水井远离取水井,可以有效避免热贯通现象的发生。     

《第一次的亲密接触》变异修辞分析

蔡智恒的语言具有浓厚的变异修辞特点,而《第一次的亲密接触》更是用口语对话的形式将这种特点发挥到淋漓尽致。其变异修辞在语音层面上表现为谐音变异;词汇层面主要表现为词语分拆、抽换语素、曲解语义、语义偏离、语体变异、色彩变异、语域变异、超常组词、方言夹用、简单符号变异;语法层面上表现为超常搭配、词类活用。     

优选多地震属性线性回归方法在预测煤层厚度中的应用

采用相关性回归分析和聚类分析优选出三种地震属性：瞬时频率算术平均值、总振幅、总能量。应用线性回归方法建立了瞬时频率算术平均值、总振幅、总能量和煤层厚度之间的回归模型。通过对三元三次回归模型与三元一次、三元二次回归模型预测结果的对比分析,选用三元三次回归模型预测了山西宁武某煤矿的煤层厚度。     

Investigation of thickness and wax content of wax deposits in polyethylene pipe using a flow loop

In this study, the thickness and wax content of wax deposits were found to be thinner and lower in the polyethylene (PE) pipe than in the stainless steel (SS) pipe using a flow loop apparatus. The diffusivity of wax, radial thermal gradient, and wax precipitation rate in the PE and SS pipes were calculated and compared. It was found the diffusivity of wax in the PE pipe was higher and tended to enhance the wax deposition in the PE pipe, while the radial thermal gradient and wax precipitation rate were lower in the PE pipe and had the opposite effects. These factors are shown to be comparable with each other and the effect of the thermal gradient dominates the mass flux of wax from bulk to the oil-deposit interface and into the deposits finally, thus causing differences in thickness and wax content of deposits between the PE and SS pipes.     

板料应变视觉测量系统研究

介绍了板料应变视觉测量系统结构和基本原理。该系统运用立体视觉技术对板料成形物理模拟中的圆形坐标网格系统进行测量，获得变形板料的应变分布。实验结果表明，该系统可以较为迅速地完成各种成形工艺的板料件应变参数的测量与分析，并取得比较理想的精度。     

微合金化磁极钢板化学成分与磁性能的关系分析

采用多元线性回归分析方法分析微合金化磁极钢板化学成分与磁感应强度K、B100的关系，并用剩余碳含量的概念，得出显著性较高的磁极钢板磁性能与硫及剩余碳含量关系的回归式。     

微量RE对易拉罐用铝材中富Fe杂质相的变质作用

在易拉罐用铝材熔体中添加微量RE元素对富Fe杂质相进行变质处理，采用扫描电镜（SEM）、X-Ray衍射（XRD）、能谱分析（EDAX）等分析测试手段研究杂质相的变质效果。结果表明：RE聚集于基体晶界，可通过与Al生成富Fe相异质形核核心，影响溶质原子扩散过程和杂质相生长方式，取代富Fe相中部分组成元素以降低x（Fe）/x（Mn）的经值等途径提高富Fe相形核率，并促使其生长形态发生变化，变质效果显著，即晶界处由粗大鱼骨状的Al（Fe,Mn,Si）复合相转变为Al（Fe,Mn,Mg,Si,RE）和Al（Fe,Mn,RE）复合相，分别呈短小骨骼状或小球状，可明显提高该事金的塑性。     

板料拉深成形过程中的变压边力技术

压边力是板料成形过程中的重要参数之一。在概述压边力在生产中的主要用途和意义的基础上，从压边力的加载模式、理论模型、实验研究变压边力技术与拉延筋、人工智能技术的交叉应用等方面，比较全面的综述了压边力技术的研究现状及存在问题，并探讨压边力技术的研究方向。     

MILLING PERFORMANCE OF COATED INSERTS WITH VARIABLE COATING THICKNESS ON THEIR RAKE AND FLANK

During the Physical Vapour Deposition of coatings, the orientation of cemented carbides insert surfaces to the plasma flux direction affects the occurring film thickness distribution on the rake and flank, which in turn might influence the wear propagation in cutting processes. In the present paper the cutting performance in milling of PVD coated cemented carbides inserts with variable film thickness on the rake and flank is introduced and with the aid of FEM-supported calculations explained. The investigation results revealed that a thicker film on the tool rake in comparison to the existing one on the flank and moreover a thick and uniformly deposited film in the cutting wedge region significantly enhances the cutting performance in milling.     

Study on interfacial structure and strength of Si_3N_4/Ti/Cu/Ti/Si_3N_4 PTLP bonding

0IntroductionRecently,the development of bonding technique ofhigh temperature structure ceramic Si3N4becomes a hottopic in the field of ceramic bonding[1].Partial transientliquid phase bonding(PTLP)has been applied in the fieldof high temperature ceramic bonding and made some pro-gress.The selection of interlayer materials is key to PTLPbonding.Since Bender discovered that Ag-based brazingmaterial including Ti could wet ceramic in1954,morestudies have shown that Ti has good wetting prope…