扇形束投影域重建—再投影迭代法

本文所提出的投影域重建——再投影迭代算法可以恢复不完整的扇形束投影数据,从而实现从有限的投影数据重建图象。这种算法把滤波——反投影图象重建过程和再投影的过程纳入一个公式,仅在投影域上估算未知的投影数据,因此避免了重建过程和反投影过程中的插值运算,改善了收敛性,提高了计算精度,缩短了运算时间。模拟实验表明:即使有70％的投影数据丢失,经过两次迭代就能以令人满意的精度恢复丢失的投影数据。     

旧貌换新颜 --漫谈东方花园酒店的改造设计

结合实例，探讨把老办公楼改造为五星级涉外宾馆的过程中遇到的问题及其解决方法。     

A geometry-based error estimation for cross-ratios

For choosing specific cross-ratios as 2D projective coordinates in various computer vision applications, a reasonable error analysis model is usually required. This investigation adopts the assumption of normal distribution for positioning errors of point features in an image to formulate the error variances of cross-ratios. Based on a geometry-based error analysis, a straightforward way of identifying the cross-ratios with minimum error variances is proposed. Simulation results show that the proposed approach, as well as a further simplified alternative, yield much better estimations of minimum error variances in terms of accuracy, cost, and stability compared with some other methods, e.g., the one based on the rule given by Georis et al. (IEEE Trans. Pattern Anal. Mach. Intell. 20 (4) (1998) 366). Some causes of the performance differences in the estimations are explained using a special configuration of point features.     

Hybrid of multi-signal processing methods for detection of small objects in containers filled with beverages using ultrasound

Ultrasound backscattered signals for object detection could be too weak to be perceived when superposed to strong reflection signals, and could also be complicated either in time or frequency domain. These peculiarities raise a challenge for signal processing methods. In this paper four signal processing methods were studied to detect objects in containers. Root mean squares (RMS) method was better in object detection but needed to combine other methods to increase detection success rate. Variance, center frequency pressure ratio (CFPR) and backscattered amplitude integral (BAI) methods have similar overall detection ratings. The optimal signal size, to increase the detection ability, corresponded approximately to the length of reverberation signals before it was dissipated.     

A tolerant approach to reconstruct topology from unorganized trimmed surfaces

Presented in this paper is a topology reconstruction algorithm from a set of unorganized trimmed surfaces. Error-prone small geometric elements are handled to give proper topological information. It gives complete topology to topologically complete models, and it is also tolerant to incomplete models. The proposed algorithm is vertex-based in that clues for topological information are searched from the set of vertices first, not from that of edges.     

链条锅炉的节能改造

本文针对株洲硬质合金厂SHL20—13—AII型20t蒸汽链条锅炉存在的问题，进行了节能改造，取得了显著的成效。     

连铸净化加压站改造

因攀钢动力厂连铸加压站的高压焦炉煤气供应不能满足生产需要，对它进行了相应改造。使工艺更加完善，煤气净化质量得到提高，并解决了生产中的一些问题。     

Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

高能 X 射线工业 CT 技术的研究进展

目的 研究分析了国内外高能X射线工业CT技术的进展情况，方法 通过有关文献资料，对目前国际上主要的高能X射线工业CT技术及设备进行评述。结果和结论 对美国、德国等发达国家的高能X射线工业CT设备、线阵探测器、面陈探测器及重建算法进行了分析。     

生物超微弱发光的光子计数成象方法

介绍了我们研制和设计的用于测量生物超微弱发光的光子计数成象系统，包括光子成象头，高帧频ＣＣＤ摄象机，图象采集系统和计算机，可以定量地探测出生物的发光强度分布 ，还能够显示出其发光的图象，确定发光的形状和位置，本系统的信噪比为１０：１，最小探测功率达１０＾－１６Ｗ，灵敏度高，动态范围大。