Theoretical Aspects Of The Kinetics Of Competitive First Reactions Of Ozone In The O3/H2O2 And O3/UV Oxidation Processes

Kinetics of competition between the ozone direct reaction with compounds in water, ozone-hydroperoxide ion reaction leading to free radicals in the O₃/H₂O₂ process, and the photolysis of ozone in the O₃/UV process are discussed in terms of diffusion and reaction times to establish conditions for these reactions to be competitive. Film theory and chemical kinetic concepts then are applied to estimate initial rates of ozone absorption and consumption, removal rates of compounds present in water, and the importance of the radical oxidation path versus direct ozone and/or photolysis reactions.     

The permeation resistance of interface and the directional dependence of permeation in plasma-grafted composite membranes

Composite membranes were prepared by grafting plasma-polymerized films onto the surface of nonporous poly (dimethylsiloxane) films. Gas permeabilities of the composite membranes were measured at 35°C, 1 atm for N₂, 0₂, CO₂ and CH₄. The permeation properties of the composite membrane was analyzed using the series resistance model. There was a great interfacial resistance to CH₄ permeation through the composite membrane. The interfacial resistance was negligible for the other gases. The interfacial resistance seems to be a result of an interfacial layer caused by the interaction between the bulk two layers. For CH₄ gas, the permeation rate through the composite membrane was affected by the direction of flow. The directional dependence was negligible for the other gases.     

Evaporative Heat Transfer of Annular Two-phase Flow of Air-water in a Small Vertical Tube

The evaporative heat transfer of the non-boiling annular two-phase flow of air-water in a small vertical tube with uniform wall heat flux was studied both theoretically and experimentally. A simplified two-phase flow boundary layer model was used to calculate the thickness of the water film attached to the wall, and from the liquid film thickness the evaporative heat transfer coefficients of the annular two-phase flow were obtained. Theoretical equations and semi-theoretical equations were proposed for predicting the evaporative heat transfer of the annular two-phase flow of air-water in a small vertical tube. The semi-theoretical prediction agrees well with the experimental data. The mechanism of the heat transfer enhancement is the evaporation of the thin liquid film attached on the wall.     

单盘缠绕机的设计

就生产钢丝缠绕胶管单盘缠绕机的设计，论述了其工作原理、主要性能参数、传动计算和自动上中胶片的设计等。     

Electrical properties of (Bi3.5La0.5)Ti3O12 thin-films prepared by liquid source misted chemical deposition

The ((Bi_3.5La_0.5)Ti₃O₁₂(BLT) thin-films used in this study were fabricated on a Pt(111)/SiO₂/Si(100) substrate by a Liquid Source Misted Chemical Deposition (LSMCD) technique. X-ray diffraction patterns showed that the BLT films were crystallized and no other phases were observed when annealed above 650 ‡C. Grain size and remnant polarizations increased with increase in the annealing temperature, while leakage current densities decreased. The remnant polarizations (Pr) increased from 2.0 to 4.8 and 19.0 μC/cm2 with increase in the annealing temperature from 650 to 700 and 750 ‡C, respectively. The BLT films annealed at 700 ‡C in O₂ showed a good fatigue resistance of reduced polarization by 10% after 10⁹ switching cycles when 9 V of bipolar voltage was applied at a frequency of 40 kHz.     

不锈钢在湿法磷酸中腐蚀行为研究

本文采用腐蚀实验和电化学测试方法对不锈钢在湿法磷酸中的腐蚀行为进行了研究，并进行钝化膜的组成与结构分析。研究表明，磷酸中加入ＳＯ４＾２＾－，ｃＬ＾－，Ｆ＾－均提高合金的维钝电流密度和致纯电流浓度，加速材料的腐蚀，这些杂质共存时腐蚀性更大。湿法磷酸中存在的Ｓｉ＾４＾＋，Ａｌ＾３＾＋，Ｍｇ＾２＾＋和Ｆｅ＾３＾＋起缓蚀作用。不锈钢纯化膜主要由Ｃｒ和Ｆｅ的氧化物组成，表面形成致密稳定的Ｃｒ２Ｏ３保护膜是提     

塑料静电植绒工艺

介绍了PVC薄膜静电植绒的工艺及控制要点，并对产品所存在的问题进行了探讨解决。     

管窥立体电影反应技术发展

随着电影行业的不断发展,数字3D立体电影的应用日益广泛。本文从立体电影的原理出发,在对传统立体电影的应用技术进行了阐述后,着重分析了现今电影行业应用最为广泛的几种数字3D电影应用技术,集中探讨了不同放映技术的工作原理及其优缺点。最后就数字3D技术的发展前景进行了探讨,为数字3D电影的长远发展提供理论支持。     

Energetic surface heterogeneity of nanocrystalline TiO<Subscript>2</Subscript> films for dye-sensitized solar cells

Dye sensitized solar cells (DSSCs) have been receiving significant attention because they have many advantages compared to conventional organic solar cells. It has been known that the photovoltaic characteristics of DSSC are highly dependent on the adsorption properties of dyes on TiO₂ films. To analyze the surface heterogeneity of TiO₂ surfaces, single-phase anatase nanocrystallite titanium films were prepared by sol-gel method using the hydrolysis reaction of titanium tetraisopropoxide under acidic condition and characterized by XRD, FE-SEM and BET analysis. The adsorption energy distribution functions were calculated by the generalized nonlinear regularization method. It was found that the shape and the intensity of the adsorption energy distribution curve determined were highly related with the physical properties (i.e., geometrical heterogeneity) and chemical characteristics (i.e., energetic heterogeneity) of nanocrystalline TiO₂ for DSSC.     

Protoporphyrin-modified gold surfaces for the selective monitoring of catecholamines

Protoporphyrin IX (PPIX) was immobilized on Au surfaces for the electrochemical oxidation of dopamine (DA) and epinephrine (EP). Two procedures for the immobilization were employed. One class of modified electrodes was prepared by immobilizing the PPIX into polypyrrole (PPy) films synthesized by anodic electropolymerization. The other procedure involved the immobilization of PPIX on an electrode modified by a 11-mercaptoundecanoic acid (MUA) self-assembled monolayer (SAM). The modified surfaces were characterized by cyclic voltammetry (CV).The efficiency of these modified surfaces for the electrochemical oxidation of DA and EP was investigated and compared. The peak potential for the oxidation of each analyte at the different electrode surfaces was determined by square-wave voltammetry (SWV).The dependence of the sensitivity of the electrodes for the detection of the catecholamines on the applied potential was also measured. The SAM-based electrodes showed better selectivity for detecting DA in the potential range between 0.2 and 0.4 V versus Pt (QRE). However, higher sensitivity and linearity were observed for the film-based electrodes.