Sulfur Versus Non-Sulfur Containing Polyimide Adhesives for Bonding Steel

Due to their superior thermal and chemical stability, polyimides are often used as adhesives in harsh environments. This study examines the effect on bond strength of thioether sulfur in the polyimide backbone. Bonds were made using steel that was believed to catalyze the oxidation of sulfur. In addition, non-sulfur containing polyimides with similar T_g were also studied for comparison. The polymer/metal interface was studied using both the T-peel and wedge tests. No apparent effect was observed in the T-peel test with steel where the T-peel strengths of non-sulfur and sulfur containing polyimides were similar. In the wedge test, however, the sulfur-containing BDSDA/ODA bonded to steel had the smallest initial crack length of 34 mm. However, the BTDA/APB bonds tested in a dry environment had the smallest crack growth. The sulfur-containing BTDA/ASD performed best of the bonds tested in a wet environment. Metal-catalyzed oxidation of sulfur was observed to take place in the steel case, but not to an extent to have a noticeable effect on peel strength.     

浅谈汽车四轮定位检测与调整技术

四轮定位对汽车的正常行驶起着十分重要的作用。对汽车四轮定位参数进行检测和调整,不仅能确保汽车的正常行驶,还能延长轮胎的使用寿命,同时节省油耗。重点研究了汽车四轮定位的检测方法和调整技术。     

不锈钢在湿法磷酸中腐蚀行为研究

本文采用腐蚀实验和电化学测试方法对不锈钢在湿法磷酸中的腐蚀行为进行了研究，并进行钝化膜的组成与结构分析。研究表明，磷酸中加入ＳＯ４＾２＾－，ｃＬ＾－，Ｆ＾－均提高合金的维钝电流密度和致纯电流浓度，加速材料的腐蚀，这些杂质共存时腐蚀性更大。湿法磷酸中存在的Ｓｉ＾４＾＋，Ａｌ＾３＾＋，Ｍｇ＾２＾＋和Ｆｅ＾３＾＋起缓蚀作用。不锈钢纯化膜主要由Ｃｒ和Ｆｅ的氧化物组成，表面形成致密稳定的Ｃｒ２Ｏ３保护膜是提     

某型自行火炮负重轮轴承的模糊可靠性分析

负重轮轴承的可靠度直接影响到履带式自行火炮的机动性能。综合考虑轴承在制造和使用过程中的各种因素,结合自行火炮的典型任务剖面,运用模糊数学和可靠性理论,对某型履带式自行火炮负重轮轴承的可靠度进行了分析。     

风力发电机组风轮建模和仿真研究

对风力发电机组风力机的重要部件风轮进行了仿真分析和研究.首先进行风速的模拟,然后在数学模型的基础上建立风轮Matlab仿真模型.风轮仿真分析分别按照空载和负载情况进行,得出并分析不同风速下的风轮功率、转矩、转速曲线,进而分析了风速突变情况下的风轮输出特性.     

AM60镁合金方向盘骨架压铸充型过程数值模拟

利用仿真软件FLOW-3D,对镁合金汽车方向盘骨架进行模拟.使用正交实验分析方法确定了压射速度、模具温度、浇注温度改变时压铸件产生缺陷百分比的变化.进行多组正交试验后,在优化的工艺参数下,观察液态镁合金充型及凝固过程中流场和温度场的分布情况,预测缺陷出现的部位,以寻求最佳的工艺参数,从而使铸造工艺和模具的设计得到了优化.模拟结果表明：最优的压射速度应为2.34m/s,模具初温为220℃,浇注温度为700℃,能达到最佳充型效果.     

压电式胎压报警器供电装置的发电特性

提出利用压电发电装置替代电池为胎压报警器提供实时电能。根据胎压报警器结构特点,提出将压电发电装置安装在车轮轮毂上,利用车轮转动中的振动来发电的方案。通过试验的方法研究了压电振子在轮毂上不同安装方式下的发电特性。试验结果表明,在既垂直于轮毂又垂直于车轮滚动方向的安装方式下,压电振子可以有效克服离心力的影响并吸收来自车轮所在平面多个方向的振动,压电发电装置发电效果较佳,适合为胎压报警器供电。利用4片45mm×15mm×0.2mm的悬臂梁型压电振子并联为胎压报警器供电,其产生的能量能够满足胎压报警器的工作要求。     

一种基于立体视觉的车轮中心测量方法

在车辆尺寸参数测量系统中,车轮中心是一个很重要的过程参数,目前该参数都是由人工进行手动测量,为此提出一种基于立体视觉的车轮中心高精度测量方法.该方法以车轮钢圈作为处理对象,首先根据边缘分组算法和椭圆拟合判别算法提取出车轮钢圈的圆形特征;其次利用立体匹配算法获取车轮钢圈圆形特征上点的三维坐标;最后通过三维平面拟合、坐标转...     

Mathematical models of grinding manufacture and tooth contact analysis of spherical gears

The spherical gear is a gear-driven mechanism with two degrees of freedom (DOF), which can transfer spatial motion and power. Grinding machining of the spherical gear is performed with a plate grinding wheel by using generating method, and based on mathematical model of the plate grinding wheel, the mathematical model of the spherical gear is set up. And then, the meshing model of a spherical gear pair is developed and the tooth contact analysis (TCA) of the spherical gear pairs is performed. After that, th...