An analysis of the electrical conductivity in BaSO4-added Ag2SO4 solid electrolyte system

The compositions (1 −x)Ag₂SO₄−(x)BaSO₄, wherex=0·01 to 0·6, were prepared by slow cooling of the melt. The extent of the solid solubility of Ba²⁺ in Ag₂SO₄ was determined by X-ray powder diffraction and scanning electron microscopy. The bulk conductivity of each sample was obtained using a detailed impedance analysis. The partial substitution of Ba²⁺ results in the enhancement of conductivity in compliance with the classical aliovalent doping theory. A simplistic model based on lattice distortion (expansion) due to partial substitution of Ag⁺ by the bigger Ba²⁺ has been considered to explain enhanced conductivity. Beyond solid-solubility limit (5·27 mole%) the BaSO₄-dispersed Ag₂SO₄ conductivity follows the usual trend seen in binary systems. An increase in conductivity in this case is discussed in the light of interfacial reactions and surface defect chemistry. The maximum conductivity in 20 mole% BaSO₄ dispersed Ag₂SO₄ is due to percolation threshold.     

Dynamic Bending Strains in Planar Trusses with Pinned or Rigid Joints

The method of reverberation ray matrix is applied to analyze the dynamic behavior of structural members in trusses with pinned joints subjected to suddenly applied force. The results are compared with those in planar trusses with rigid joints. Detailed calculations are made with two types of trusses, a small laboratory model made of slender aluminum bars, and a hypothetical real size Pratt truss made of structural steel. It is found that the maximum dynamic bending strains in the members of both types of trusses are very large, comparable with the dynamic axial strains in the same member. The magnitudes of bending strains in the pinned truss differs little from those in the truss with rigid joints for both types of trusses. Such a large dynamic bending strain in a structure member, which is contradictory to the static behavior of the same truss, could be caused by the inertial force of the mass in structural members of the truss.     

四维空间直线绕平面的旋转

本文对四维空间直线绕平面旋转的轨迹进行一投详尽的讨论，按照直线与“轴平面”的相对位置不同，该旋转轨迹分别为圆柱面、圆锥面和单叶回转双曲面，并认为这些回转曲面的轴线是过该直线的与“轴平面”垂直的超平面与“轴平面”的交线。     

材质对蜂窝纸板缓冲性能的影响

对两种不同材质的蜂窝纸板静态应力应变性能和动态缓冲结果进行了比较分析。讨论了蜂窝纸板力学性能对应变速度的敏感性及两种纸板的缓冲性能差异。缓冲试验结果表明。在不同的冲击应变率下蜂窝纸板的材质影响蜂窝纸板缓冲性能。     

认真创建服务型企业拓展老水电厂发展空间——湖北省白莲河水力发电厂发展问题的思考

根据对白莲河电厂历史的与现状的分析,提出该厂应当由生产型向服务型转变,在服务中提高职工素质,拓展老水电厂的发展空间.     

鄂尔多斯西缘前陆盆地巨厚黄土地区地震采集技术

鄂尔多斯西缘前陆盆地表层地质地貌极其复杂，有巨厚黄土区、黄土-沙漠区及山前砾石-黄土区，独特的黄土地貌使得地震采集面临着诸多技术难题。根据以往巨厚黄土地区地震采集经验，采用多种方法系统地开展黄土表层结构精细调查，深入研究黄土地球物理特征及激发因素与表层黄土结构之间的关系，优选激发井位和井深，确保了激发效果；采用小道距、三线小线距、高密度空间采样技术，获得了高信噪比、高分辨率地震资料。研究表明，巨厚黄土地区地震采集时应优选激发井位和岩性，合理选择激发井深；坚持多深井组合激发、单井药量不宜过大总药量要大两项基本原则；采用高密度采样技术，提高采集资料的覆盖次数和信噪比。图10表1参15     

Lateral space-charge effects on ballistic electron transport across graded heterojunctions

Hot electron transport across graded compound semiconductor heterojunctions has been explored using a two-dimensional formulation of the self-consistent ensemble Monte Carlo method. The Al_xGa_1-xAs/GaAs heterojunction imbedded into a vertical field effect transistor with two ohmic contacts (source, drain) and two lateral Schottky gates has been used as an example. Lateral space charges modulated by the gates are shown to control ballistic injection of electrons over the heterojunction under steady state conditions. The transient response to a gate pulse is found to be determined by carrier transit from the heavily doped source contact region into the channel. A conceptual one-dimensional section model is used to explain the Monte Carlo results.     

Design Methodology of the Structure of Postal Express Mail Networks of Aviation Channels in China

1　ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｏｒｄｅｒｔｏｉｍｐｒｏｖｅｔｈｅｑｕａｌｉｔｙｏｆｐｏｓｔａｌｓｅｒｖｉｃｅａｎｄｔａｋｅａｄｖａｎｔａｇｅｏｆａｕｔｏｍａｔｅｄｍａｉｌｓｏｒｔｉｎｇｅｑｕｉｐ ｍｅｎｔｓ,ｉｔｈａｓｂｅｅｎｄｅｔｅｒｍｉｎｅｄｔｏｃｏｎｓｔｒｕｃｔｔｈｅｐｏｓｔａｌａｒｅａｃｅｎｔｅｒｏｆｆｉｃｅｓｙｓｔｅｍｉｎＣｈｉｎａＰｏｓｔａｌＳｅｒ ｖｉｃｅ (ＣＰＳ) .ＴｈｅｃｒｕｘｏｆｔｈｅｐｒｏｂｌｅｍｆａｃｅｄｂｙＣＰＳｉｓｔｏｒｅｄｅｓｉｇｎｔｈｅｐｏｓｔａｌｃｏｍｍｕｎｉｃａ…     

载人航天高可靠伺服技术

回顾了载人航天高可靠伺服技术的研制道路，介绍了用于载人航天火箭推力矢量控制中的新型三余度伺服机构的技术特点，对载人航天伺服技术的未来发展进行了分析和展望。     

基于DSP的空间电压矢量控制的变频系统设计

介绍了电压空间矢量技术的基本原理和数字信号处理器TMS320F240的基本结构，并讨论了基于TMS320F240的变频调速系统的软硬件设计，提出了一般性的结论。