Statistical optimization of biohydrogen production from sucrose by a co-culture of Clostridium acidisoli and Rhodobacter sphaeroides

Statistically based experimental designs were applied to optimize the fermentation process parameters for hydrogen (H₂) production by co-culture of Clostridium acidisoli and Rhodobacter sphaeroides with sucrose as substrate. An initial screening using the Plackett–Burman design identified three factors that significantly influenced H₂ yield: sucrose concentration, initial pH, and inoculum ratio. These factors were considered to have simultaneous and interdependent effects. A central composite design and response surface analysis were adopted to further investigate the mutual interactions among the factors and to identify the values that maximized H₂ production. The optimal substrate concentration, initial pH, and inoculum ratio of C. acidisoli to R. sphaeroides were 11.43 g/L sucrose, 7.13, and 0.83, respectively. Using these optimal culture conditions, substrate conversion efficiency was determined as 10.16 mol H₂/mol sucrose (5.08 mol H₂/mol hexose), which was near the expected value of 10.70 mol H₂/mol sucrose (5.35 mol H₂/mol hexose).     

Production of hydrogen in a granular sludge-based anaerobic continuous stirred tank reactor

An investigation on biohydrogen production was conducted in a granular sludge-based continuous stirred tank reactor (CSTR). The reactor performance was assessed at five different glucose concentrations of 2.5, 5, 10, 20 and 40 g/L and four hydraulic retention times (HRTs) of 0.25, 0.5, 1 and 2 h, resulting in the organic loading rates (OLRs) ranged between 2.5 and 20 g-glucose/L h. Carbon flow was traced by analyzing the composition of gaseous and soluble metabolites as well as the cell yield. Butyrate, acetate and ethanol were found to be the major soluble metabolite products in the biochemical synthesis of hydrogen. Carbon balance analysis showed that more than half of the glucose carbon was converted into unidentified soluble products at an OLR of 2.5 g-glucose/L h. It was found that high hydrogen yields corresponded to a sludge loading rate in between 0.6 and 0.8 g-glucose/g-VSS h. Substantial suppression in hydrogen yield was noted as the sludge loading rate fell beyond the optimum range. It is deduced that decreasing the sludge loading rate induced the metabolic shift of biochemical reactions at an OLR of 2.5 g-glucose/L h, which resulted in a substantial reduction in hydrogen yield to 0.36–0.41 mol-_H2${\mathrm{H}}_2$/mol-glucose. Optimal operation conditions for peak hydrogen yield (1.84 mol-_H2${\mathrm{H}}_2$/mol-glucose) and hydrogen production rate (3.26 L/L h) were achieved at an OLR of 20 g-glucose/L h, which corresponded to an HRT of 0.5 h and an influent glucose concentration of 10 g/L. Influence of HRT and substrate concentration on the reactor performance was interrelated and the adverse impact on hydrogen production was noted as substrate concentration was higher than 20 g/L or HRT was shorter than 0.5 h. The experimental study indicated that a higher OLR derived from appropriate HRTs and substrate concentrations was desirable for hydrogen production in such a granule-based CSTR.     

Improved Non-uniformity Correction Method for Uncooled Microbolometer

The uncooled microbolometer has a severe temperature requirement for non-uniformity correction. An improved two-point non-uniformity correction method is proposed, which can operate in wider uniform substrate temperatures. This method can control the bias voltage of MOS transistors by memory and DAC to meet two restrictions about responsivity and offset before traditional two-point calibration is implemented. The simulation results seem that this non-uniformity correction can work at uniform substrate temperature with fluctuant range of 4K.     

Identification of (−)-epicatechin as the direct substrate for polyphenol oxidase from longan fruit pericarp

Postharvest browning of longan fruit results in a short life and a reduced commercial value. The experiments were conducted to separate, then purify and finally identify the polyphenol oxidase (PPO) substrates that cause longan fruit to brown. PPO and its substrates were, respectively, extracted from longan fruit pericarp tissues. The substrate for longan PPO was separated and purified using polyamide column chromatography, Sephadex LH-20 column chromatography and silica gel column chromatography, respectively. The substrate was further identified by 0.5% FeCl₃ solution and enzymatic reaction with longan PPO. On the bases of UV, ¹H NMR, ¹³C NMR, and ESI-MS data, the direct substrate for the PPO from pericarp tissues of longan fruit was identified to be (−)-epicatechin. Furthermore, the contents of (−)-epicatechin of pericarp tissues of longan fruit of two major cultivars were determined by high performance liquid chromatography (HPLC). The HPLC analysis exhibited that the contents of (−)-epicatechin of fruit pericarp of ‘Shixia’ and ‘Chuliang’ were 0.26 and 0.56 mg/g on fresh weight (FW) basis at harvest and 0.15 and 0.09 mg/g FW after 3 days of storage. The more rapid decrease in the (−)-epicatechin content of ‘Chuliang’ was due to the oxidization catalyzed by PPO, which was in agreement with the higher browning index.     

高容量泡沫式镍电极的研制

本文介绍了一种高容量泡沫式镍电极,确定了电极的工艺参数,考察了由其作为正极的圆柱密封氢镍电池的性能。     

Preparation of Docosahexaenoic Acid-Rich Diacylglycerol-Rich Oil by Lipase-Catalyzed Glycerolysis of Microbial Oil from Schizochytrium sp. in a Solvent-Free System

Docosahexaenoic acid (DHA)-rich diacylglycerol (DAG)-rich oil was prepared by lipase-catalyzed glycerolysis of microbial oil from Schizochytrium sp. in a solvent-free system. The reaction parameters including lipase type, substrate molar ratio, temperature, lipase concentration, and reaction time were screened. The selected conditions were determined as follows: Novozym® 435 (Novozymes A/S, Bagsvaerd, Denmark) as biocatalyst at 8 wt%, substrate ratio (DHA-rich microbial TAG/glycerol) of 1:1 mol/mol, temperature of 50 °C, and reaction time of 12 hours. Under these conditions, the triacylglycerol (TAG), DAG, and monoacylglycerol (MAG) contents in the product were 36.4%, 48.2%, and 15.4%, respectively. The lipase was reused successively for 18 cycles without significant loss of activity under the conditions given above. Fatty acid composition analysis of the final product showed that the contents of DHA in TAG, DAG, and MAG were 53.9%, 44.9%, and 34.8%, respectively. DHA-rich DAG has the potential to be used as an ingredient in infant formula to increase the bioavailability of DHA.     

Influence of the Substrate/Inoculum Ratio on Process Stability and Performance during Batch Digestion of Grass Silage

The impact of the substrate/inoculum ratio on the performance and process stability during batch digestion of grass silage, an important substrate in biogas plants, was investigated. The methane yield, degradability, and evolution of intermediary products were monitored in mesophilic reactors fed with increasing amounts of grass silage. A first‐order kinetics model was also applied. Signs of inhibition were observed for the highest loadings, but the system recovered and process failure was not observed. The methane yield decreased with increasing loading but the system was resilient to high loadings under batch conditions.     

复合膜吸杂技术在硅分立器件制造中的应用

利用复合膜吸杂技术处理硅晶体材料改善硅衬底及外延片质量的吸杂原理.通过三探针测量、DLTS 检测、MOS 电容器弛预时间、器件结特性的改善和成品率的提高显示了复合膜吸杂的吸杂效果.实验结果表明,复合膜吸杂枝术是有效、简便、可控、稳定、成本低廉且与器件制造工艺是相容的.很有开发、推广价值.     

PREPARATION AND PERMEABILITY CONTROL OF ELECTRO-SENSITIVE MICROCAPSULES WITH IMMOBILIZED FERROELECTRIC LIQUID CRYSTALLINE SEGMENTS

Nylon-polystyrene microcapsules with immobilized ferroelectric liquid crystalline segments were prepared, and the permeability control of the encapsulated core material was investigated under an external electric field. A ferroelectric liquid crystal monomer possessing both mesogenicity and chirality effectively responded to an external electrical field. Permeation of the material (oxprenolol) contained in the inner aqueous core of the microcapsules was enhanced under a feeble electric field (2 V). Furthermore, it was found that the permeability of the microcapsules without the ferroelectric liquid crystal group did not depend on the external electrical field. In order to clarify the controlled release mechanism of the core material, the transmittance was quantitatively evaluated under an external electric field using a handmade polarized light transmittance apparatus.     

Effect of substrate curvature on residual stresses and failure modes of an air plasma sprayed thermal barrier coating system

A set of aerofoil shaped air plasma sprayed thermal barrier coated (APS-TBC) specimens were adopted in this paper to investigate the stress distributions in the ceramic top coat (TC) and the thermally grown oxide (TGO), the mechanism of local crack generation and propagation at the TC/BC (bond coat) interface. The failure mode of the TBC system, the distribution of asperities at TC/BC interface, thickness of the TC and BC, and the TC microstructure were found to be influenced by substrate curvature. Residual stress was therefore measured across the thickness of the TC, along the undulating TGO and mapped at locations of asperities where failure tended to occur to interpret the initiation of local failure. The role of the TGO was investigated via its chemical bonding with the TC and the decohesion occurring at the TGO/BC interface. The crack propagation at the interface has been discussed with respect to the macro-failure of the TBC system.