基于GSM模块TC35I的收发控制系统设计

基于GSM网络平台,采用了TC35I和STC89C52作为数据收发系统,进行单片机STC89C52与短信收发模块TC35I的数据传输,以及PC机与STC89C52通信的研究,并进行了系统硬件与软件方案的设计和系统调试.利用PC机作为数据管理和服务器,实现了PC机、STC89C52单片机与TC35I收发系统的通信.     

基于Windows平行文件系统下的平行I/O

近年来,平行档案系统被广泛的用来解决这个问题,除此之外,由于电脑被使用于平行处理平台的普及率逐步上升,造成使用于电脑上的平行处理软体需求量持续增加,但是,却有可能缺乏平行I/O的系统。因此,文章旨在研究与分析Windows平行文件系统下的平行I/O的特点与实现方式。     

A low‐profile antenna with circularly polarized reconfigurable and omnidirectional radiation patterns

A low profile circularly polarized (CP) antenna with reconfigurable polarization is designed and presented, which can radiate omnidirectional patterns that can be switched between left‐hand circularly polarized (LHCP) and right‐hand circularly polarized (RHCP). A pair of arc‐shaped complementary dipoles is acted as reconfigurable elements by bridging four pin diodes at the dipole arced arms. A meander phase shift line is employed to connected the arc dipole arms and plate cavity to adjust the phase relationship of two sources. The proposed antenna exhibits the omnidirectional radiation pattern by combining six identical elements placed in a circular array configuration. 24 p‐i‐n diodes are exploited to six elements, by manipulating the dc bias voltage across the diodes, the polarization state of the antenna can be switched. The patterns of the antenna are similar to that of a dipole, but its size is only about Φ0.87 × 0.029λ₀ at 5.8 GHz. The overlapped bandwidth of measured 3‐dB axial ratio (AR) and 10‐dB return loss is 5.724‐5.87 and 5.738‐5.91 GHz for two polarization states, which are right on the target of ISM band. It can be well adapted to medical diagnosis systems.     

A Cross-sectional Study on the Relationship Between Homocysteine and Lipid Profiles Among Chinese Population from Hunan

Previous studies have explored the relationship between homocystein (Hcy) and lipid profiles. However, the results from these studies have been inconsistent. The current study investigated the correlation between Hcy and lipid profiles in Chinese community-based population. The participants were composed of 4012 Chinese people aged 30–92 years old, who were recruited from rural and urban communities in the Hunan Province. Non-parametric test and logistic regression were used to examine the distribution of Hcy and lipid profiles (triglyceride [TG], total cholesterol [TC], low-density lipoprotein cholesterol [LDL-C], high-density lipoprotein cholesterol [HDL-C]) and the relationship between them. The median age of subjects was 54.50 years old, and 40.98% were male. Median Hcy was 13.20 μmol/L, and 35.39% had hyperhomocysteinemia (HHcy). Median TG was 1.51 mmol/L, TC was 4.77 mmol/L, LDL-C was 2.62 mmol/L, and HDL-C was 1.27 mmol/L. In multivariable logistic regression analysis, HHcy was associated with high levels of TG (OR_male = 2.240, p < 0.001; OR_female = 2.539, p < 0.001), TC (OR_male = 2.237, p < 0.001; OR_female = 2.202, p < 0.001), and LDL-C (OR_male = 1.413, p = 0.010; OR_female = 1.617, p < 0.001) in the different sexes population and low level of HDL-C in females (OR = 1.326, p = 0.023) after adjusting for confounders. HHcy was independently associated with an increasing risk of low HDL-C among females. The regression analysis showed that HHcy was also associated with hypertriglyceridemia, hypercholesterolemia, and high level of LDL-C in males and females from Chinese community-based population, which provides a basis for the treatment and prevention of abnormal lipid metabolism.     

钛合金表面双层辉光离子渗铝的研究

利用双层辉光渗金属技术，以铝为源极、TC4(Ti-6Al-4V)为阴极、氩气为工作气体，依靠辉光放电和不等电位空心阴极效应在TC4表面形成合金层。采用X射线衍射和辉光放电光谱分析了合金层的相组成及渗层内Al元素的分布．并对其进行硬度测试。结果表明：渗层由Ti3Al和α-Ti组成；铝的含量可达18％；渗层厚度可达13μm；其硬度比经渗铝处理后的有了较大程度的提高。     

TC4钛合金的微动疲劳行为研究

研究了TC4钛合金在柱面-平面接触条件下的微动疲劳行为.通过观察微动区的磨损特征和截面形貌,分析了微动疲劳损伤机制,探讨了磨屑的形成与演变过程及其对微动疲劳行为的影响,考察了摩擦系数随时间的变化.结果表明,TC4钛合金微动区的损伤机制以粘着磨损、磨粒磨损和接触疲劳为主,并伴有氧化磨损.磨屑是基体材料脱落、破碎、氧化形成的,磨屑中的硬质氧化物颗粒促进了合金表面的磨粒磨损,加速了疲劳失效.     

水电站座环及导叶用钢SXQ500/550DZ35热力学计算及析出相分析

水电建设的发展，对水电站座环及导叶用SXQ500/550DZ35特厚板的性能提出了更高的要求，其成分中加入合金元素多，各种相的析出复杂，而析出相与钢的组织性能密切相关，因此利用Thermo Calc软件对SXQ500/550DZ35水电用钢进行了热力学计算及平衡相分析。结果表明，FCC_A1#2、FCC_A1#3及FCC_A1#4相析出温度区间集中于900~1 400 ℃之间，属于微合金元素V、Nb、Ti与C、N元素结合生成的碳化物以及碳氮化物，其能钉扎奥氏体晶界，细化奥氏体晶粒。通过钢板在970、1 020、1 070 ℃保温22 min后水淬至常温，并采用场发射电镜对其进行检测，析出相主要为NbC、TiC、Ti（C,N），与热力学软件计算相符合。     

TC4合金激光焊接工艺参数与接头组织性能研究

用OM、SEM等手段分析了不同激光焊接工艺参数下焊缝成形和其微观组织特征，并测试了焊缝的力学性能。结果表明：0．8mm厚钛合金板激光穿透焊离焦量范围约在-2mm～＋2mm之间，最佳离焦量为-0．5mm。随焊接线能量的增大，焊缝熔宽和背面宽度都呈增大趋势，且背面宽度的增加更为显著。TC4合金焊缝为针状马氏体α′组成的网篮组织。随着焊接热输入量的增加，马氏体的形态由平行的单相针转变为多相针，分布更加密集和散乱。不同焊接工艺参数下接头的强度均高于母材，塑性低于母材。     

新型TC21钛合金热处理工艺参数与显微组织演变的关系研究

TC21钛合金是新型的高强韧损伤容限型钛合金，其模锻件为网篮组织，锻后热处理工艺采用双重退火工艺。本研究采用金相法、SEM等方法系统研究了TC21钛合金模锻件的锻后热处理工艺和显微组织演变规律。试验分析了TC21钛合金模锻件锻后第1次退火加热温度、第2次退火加热温度和保温时间等工艺参数条件下的初生α相数量、形状以及网篮组织形貌特征的变化规律，为TC21钛合金模锻件获得高强、高韧和损伤容限优良综合性能奠定基础。     

TC4钛合金与LD10铝合金感应摩擦焊接头的组织与性能

利用感应电磁场对焊接过程热与物质流动作用,改善异种金属摩擦焊接头的组织与性能。采用光学金相、扫描电镜及室温拉伸实验与对比分析的方法,研究了外加电磁场对弱磁性材料TC4钛合金与LD10铝合金摩擦焊接头焊合区的显微组织、主要合金元素扩散行为及室温力学性能的影响。结果表明:外加电磁场作用使TC4钛合金与LD10铝合金摩擦焊接头铝合金侧动态再结晶区宽度增大;同时,感应电磁场通过影响摩擦副合金材料内部电子密度状态等,促进了摩擦焊接过程中主要合金元素Al和Ti在焊合区的扩散过程,并且提高了TC4钛合金与LD10铝合金摩擦焊接头的拉伸强度。其中,外加电磁场在顶锻保压阶段的影响更为明显。