关于离子注入中温升的探讨

本文在理论和试验两个方面探讨了离子注入中的热效应和温升现象。注入样品的温升对离子注入层的性能有直接影响。分析了理论计算注入样品温升的一些情况。给出了实际测量注入样品温升的几种试验方法。阐明了控制注入样品温升的若干可能途径。     

Behavior of a Semiintegral Bridge Abutment under Static and Temperature-Induced Cyclic Loading

This paper presents the results of an experimental study of semiintegral bridge abutments. Primary interests were to investigate (1) potential problems with the particular detail tested; (2) rotational characteristics of the semiintegral abutments; and (3) ability of the specimens to withstand cyclic loading induced by temperature variations during the expected life of the bridge. Sixteen experiments were conducted on three large-scale specimens. The results of the tests have shown that semiintegral abutments can significantly reduce the moments transferred from the superstructure to the foundation piles. Test results have also shown that semiintegral abutments can tolerate the number of displacement cycles that a bridge will experience during the course of its economic life.     

Effect of temperature on the development of the yam moth, Dasyses rugosella Stainton (Lepidoptera: Tineidae)

Studies on the effect of temperature on the development of the yam moth, Dasyses rugosella Stainton were carried out in the laboratory at four different temperatures, 20°C, 24°C, 29°C and 33°C. The mean fecundity per female at 20°C, 24°C, 29°C and 33°C was 37.6±1.9, 84.2±2.7, 112.3±3.9 and 109.3±3.9 eggs, respectively. Oviposition period ranged from 4.7 days at 20°C to 2.9 days at 33°C. Hatchability of eggs was highest at 29°C with 70.0% and lowest at 20°C with 15.0%. The developmental time decreased with increase in temperature. The mean developmental time at 20°C, 24°C, 29°C and 33°C was 13.8±0.3, 7.8±0.2, 5.1±0.2 and 3.9±0.2 days for the egg, 90.0±0.7, 50.1±0.7, 36.1±0.8 and 23.6±0.8 days for the larval stages, 22.3±2.6, 12.2±0.2, 10.1±0.1, and 7.8±0.2 days for the pupa and 126.1±0.8, 70.1±0.8, 51.3±0.9, and 35.1±0.8 days for the period from egg hatching to adult emergence, respectively. Since fecundity, oviposition and development of the moth were impaired at 20°C, storage of yam tubers at low temperatures (well below 20°C but not lower than 12°C to avoid chilling injury) will significantly retard the development of D. rugosella and help in its control. Unmated individuals lived longer than their mated counterparts. Adult females were always larger than the males. The wing span of the female ranges from 16.9-18.5 and in males from 13.0-15.0 mm. The body length for males ranged from 5.0-6.5 and was 6.5-9.0 mm for females.     

Understanding chemical reactions between carbons and NaOH and KOH: An insight into the chemical activation mechanism

Direct mixing of an anthracite with hydroxides (KOH or NaOH) and heat treatment up to 730 °C has shown to be a very good activation procedure to obtain activated carbons with very high surface areas and high micropore volumes. The reactions involved during the heat treatment of these hydroxide/anthracite mixtures have been analysed to deep into the fundamental of the knowledge of this chemical activation process, that has not been studied before. For this purpose, the present paper analyses the drying process, the atmosphere during the carbonisation, the chemical state of the activating agents (NaOH, KOH and Na₂CO₃) and the chemical reactions occurring during the heat treatment which have been followed by FTIR and TPD. The analysis of our results allows us to conclude that steam is a good atmosphere for the carbonisation process, alone or joined with nitrogen, but not as good as pure nitrogen. On the other hand, during the activation process, the presence of CO₂ should be avoided because it does not develop porosity. The reactions, and chemical changes, involved during this chemical process are discussed both from a thermodynamical point of view as well as identifying the reaction products (H₂ by TPD and Na₂CO₃ by FTIR). As a result, this paper helps to cover the present lack of understanding of the fundamentals of the reactions of an anthracite with hydroxides which are necessary to understand the activation of the material.     

基于遗传算法的工作辊温度场参数优化模型

针对热连轧机工作辊热辊形计算中温度场模型的热交换等参数难以确定的问题 ,建立了基于遗传算法的参数优化模型 ,可以解决复杂条件下的热参数的求解问题。利用优化参数计算的轧辊温度场与实际测量结果一致。     

浅谈变频器供电条件下电动机的温升与对策

随着变频调速技术的蓬勃发展，变频器供电电机的温升问题已引起人们的广泛关注。本文首先讨论了电动机的温升限度；然后结合感应电机温升实验的相关数据分析了变频器供电对电动机温升的影响及其原因；最后从降低发热量和提高散热能力两方面提出缓解电机温升的措施，并指出了实际应用中应注意的问题。     

住宅楼温度裂缝产生的原因与防治措施

本文对建筑物温度裂缝产生的原因进行了分析和探讨 ,并从设计、施工方面对防治裂缝提出了措施。     

Thermal Performance Analysis of Highly Reflective Coating on Residences in Hot and Arid Climates

A 1-D transient model (RESHEAT), developed by the writers, was used to study the thermal performance of a highly reflective paint applied sequentially to the outer walls and roof of a simulated residence in a hot and arid region of the southwestern United States. The model uses climatological inputs from a file that includes hourly data on ambient temperatures, insolation, cloud cover, and so on, at the particular location. The model focuses particularly on the potential cooling load reduction due to the reduced heat pickup from the inside attic surfaces to the outer surfaces of the supply duct. This simulation showed that a reduction of 33.6% (cooling load) on the average is achieved over the base case where no reflective paint is used when the outer surface of the roof and walls are painted. Alternatively, only a 11% reduction would be achieved if the reflective paint is applied only to the roof. Savings of $42 per month are conservatively estimated from calculations made when applying this technology to a typical residence (roof and walls) equipped with a 4 ton refrigeration unit in the Southwest.     

Characterization of supported Pd-Pt catalysts by chemical probes

The temperature programmed (palladium) hydride decomposition appeared very effective method for diagnosing the extent of alloying in Pd-Pt/SiO₂ catalysts. Introduction of Pt to Pd catalysts moves the TPHD peak gradually towards lower temperatures and the shift in hydride decomposition peak is accompanied by a decrease in the amount of released hydrogen. The catalysts prepared the direct redox method showed much better alloy homogeneity than the samples prepared by coimpregnation. The results of probing with other techniques, i.e. catalytic probing with hydrodechlorination of CCl₂F₂ and XRD, were in line with TPHD data. The catalytic probing showed the presence of synergistic effect, a clear indication of Pd-Pt mixing. XRD data of post-reaction samples showed carbon incorporation into Pd-rich phase, whereas separate Pt-rich phase did not experience any bulk carbiding.     

Mapping surface temperature in large lakes with MODIS data

Satellite sensor MODIS on two platforms can produce Sea Surface Temperature over certain regions about three to four times per day. Our objective was to test if the MODIS SST product can be applied for lakes whose surface areas are large enough to be observed at the MODIS spatial resolution and to compare the satellite-derived lake surface temperatures with in situ measurements. Surface temperatures for Lakes Vänern and Vättern in Sweden, two of the largest European lakes, are extracted from the MODIS/Terra images for period 2001-2003. The results are analyzed on different quality levels, as all MODIS L2 products are equipped with an additional quality flag. We present temperature development over 2001-2003, and show the capability of the MODIS SST product to couple the known thermodynamical features in the lakes under study, where temperature varies greatly with space and time. These results can complement lake monitoring programs anywhere.