低温硅双极晶体管基区优化设计

常规双极晶体管在７７Ｋ下电流增益和频率性能都严重退化。本文首先分析了低温双极晶体管基区Ｇｕｍｍｅｌ数，基区方块电阻，渡越时间和穿通电压等参数与温度及基区掺杂的关系，然后讨论了低温双极器件基区的优化设计问题。     

内燃机车曲轴中频淬火过程的数值模拟

借助 ANSYS大型有限元分析软件 ,实现了 16 V2 4 0曲轴淬火过程的计算机模拟 ,模拟结果可直观地显示出任一时刻曲轴表面及内部的温度分布、冷却曲线以及淬火结束后的残余应力分布 ,并能预测淬硬层深度。同时对比了轴颈内圆角处进行淬火和不进行淬火两种工艺的效果 ,为现场提供了用虚拟现实方法详尽分析和研究淬火工艺的工具。     

宝钢钢管IPSEN炉炉温调节仪表的改造

在宝钢钢管调质炉(IPSEN炉)控制系统的改造中,用西门子S7-400的PID功能软件模块改造原模拟调节器,以实现加热调质温度控制.介绍了用S7-400的PID控制模块构成淬火炉、淬火油槽、回火炉温度控制的方法,并由此提出对宝钢钢管生产中其它加热炉控制系统改造的选择方案.     

Nonlinear coupled problems in dynamics of shells

The coupled system of three partial differential equations governing a flexible shallow shell dynamics is analysed. No any prior assumptions about the temperature distribution through the shell thickness are applied. The efficiency of the method used here when applied to the solution of integral-differential equations with different dimensions (three-dimensional equations related to the Kirchhoff-Love model) and of different type (heat transfer equations and the hyperbolic equations of shell theory) is demonstrated. Many computational results are reported and discussed.     

万家寨引黄南干线二级泵站出水压力平洞混凝土衬砌裂缝成因与处理

分析引黄南干二级泵站出水压力平洞混凝土村砌裂缝成因以及处理办法     

关于离子注入中温升的探讨

本文在理论和试验两个方面探讨了离子注入中的热效应和温升现象。注入样品的温升对离子注入层的性能有直接影响。分析了理论计算注入样品温升的一些情况。给出了实际测量注入样品温升的几种试验方法。阐明了控制注入样品温升的若干可能途径。     

Behavior of a Semiintegral Bridge Abutment under Static and Temperature-Induced Cyclic Loading

This paper presents the results of an experimental study of semiintegral bridge abutments. Primary interests were to investigate (1) potential problems with the particular detail tested; (2) rotational characteristics of the semiintegral abutments; and (3) ability of the specimens to withstand cyclic loading induced by temperature variations during the expected life of the bridge. Sixteen experiments were conducted on three large-scale specimens. The results of the tests have shown that semiintegral abutments can significantly reduce the moments transferred from the superstructure to the foundation piles. Test results have also shown that semiintegral abutments can tolerate the number of displacement cycles that a bridge will experience during the course of its economic life.     

Effect of temperature on the development of the yam moth, Dasyses rugosella Stainton (Lepidoptera: Tineidae)

Studies on the effect of temperature on the development of the yam moth, Dasyses rugosella Stainton were carried out in the laboratory at four different temperatures, 20°C, 24°C, 29°C and 33°C. The mean fecundity per female at 20°C, 24°C, 29°C and 33°C was 37.6±1.9, 84.2±2.7, 112.3±3.9 and 109.3±3.9 eggs, respectively. Oviposition period ranged from 4.7 days at 20°C to 2.9 days at 33°C. Hatchability of eggs was highest at 29°C with 70.0% and lowest at 20°C with 15.0%. The developmental time decreased with increase in temperature. The mean developmental time at 20°C, 24°C, 29°C and 33°C was 13.8±0.3, 7.8±0.2, 5.1±0.2 and 3.9±0.2 days for the egg, 90.0±0.7, 50.1±0.7, 36.1±0.8 and 23.6±0.8 days for the larval stages, 22.3±2.6, 12.2±0.2, 10.1±0.1, and 7.8±0.2 days for the pupa and 126.1±0.8, 70.1±0.8, 51.3±0.9, and 35.1±0.8 days for the period from egg hatching to adult emergence, respectively. Since fecundity, oviposition and development of the moth were impaired at 20°C, storage of yam tubers at low temperatures (well below 20°C but not lower than 12°C to avoid chilling injury) will significantly retard the development of D. rugosella and help in its control. Unmated individuals lived longer than their mated counterparts. Adult females were always larger than the males. The wing span of the female ranges from 16.9-18.5 and in males from 13.0-15.0 mm. The body length for males ranged from 5.0-6.5 and was 6.5-9.0 mm for females.     

Understanding chemical reactions between carbons and NaOH and KOH: An insight into the chemical activation mechanism

Direct mixing of an anthracite with hydroxides (KOH or NaOH) and heat treatment up to 730 °C has shown to be a very good activation procedure to obtain activated carbons with very high surface areas and high micropore volumes. The reactions involved during the heat treatment of these hydroxide/anthracite mixtures have been analysed to deep into the fundamental of the knowledge of this chemical activation process, that has not been studied before. For this purpose, the present paper analyses the drying process, the atmosphere during the carbonisation, the chemical state of the activating agents (NaOH, KOH and Na₂CO₃) and the chemical reactions occurring during the heat treatment which have been followed by FTIR and TPD. The analysis of our results allows us to conclude that steam is a good atmosphere for the carbonisation process, alone or joined with nitrogen, but not as good as pure nitrogen. On the other hand, during the activation process, the presence of CO₂ should be avoided because it does not develop porosity. The reactions, and chemical changes, involved during this chemical process are discussed both from a thermodynamical point of view as well as identifying the reaction products (H₂ by TPD and Na₂CO₃ by FTIR). As a result, this paper helps to cover the present lack of understanding of the fundamentals of the reactions of an anthracite with hydroxides which are necessary to understand the activation of the material.