连续体结构的参数化水平集统一优化

针对传统分步式结构优化设计的不足,提出一种同时进行结构拓扑、形状和尺寸统一优化的设计方法.首先采用水平集函数描述统一的结构优化模型和几何尺寸边界,通过引入紧支径向插值基函数将结构拓扑优化变量、形状优化变量和尺寸优化变量变换为基函数的扩展系数;然后取该扩展系数为设计变量,借助一种参数的变化表达3种优化要素对结构性能的影响,将复杂的多变量优化问题变换为相对简单的参数优化问题,有利于与相对成熟的优化算法相结合提高求解效率;进一步用R函数将其融合为一个整体,构造出统一优化模型,并用最优化准则法进行求解.最后通过数值案例证明了该方法的有效性和精确性.     

全局优化的一类新的F-C函数

针对求解全局优化问题,有很多种求解方法。文中提出了一种快速求解一般无约束最优化问题的辅助函数方法。即F-C函数方法。该方法与填充函数法和跨越函数法相比较,既有相同点又有不同点。F-C函数法最大的优点就是在极小化F-C函数阶段中只需要进行一次局部极小化算法就能得到比当前极小值更低的目标函数局部极小点。文中在无Lipschitz连续的条件下,给出了一类新的求解全局优化问题的F-C函数。文中讨论了该F-C函数的优良性质并对该函数设计了相应的算法。最后,通过数值试验表明该F-C函数方法具有有效性和可行性。     

对日IT软件产业结构优化的研究

软件服务外包作为一个新型的软件产业方兴未艾,这种贸易方式加强了国际间的合作与区域性产业的互补。作为中国的近邻日本,这种互补方式的优势显得尤为突出。但是,由于中国外包企业的竞争力较弱、技术力量不够雄厚、企业规模尚未形成等弱点存在,大大制约着中国软件服务外包业的进一步发展。特别是随着诸多新兴接包国家和地区的崛起,使得中国所面临的竞争进一步加大,从前的低成本优势将得到削弱。这些都严重地制约着中国软件服务外包行业的健康发展。有序地调整以低端为主的产业结构,提高自主创新能力,加大服务外包在国家IT（Information Technology）产业中的比重,从而增强核心竞争力。     

考虑多样化需求的诊疗设备维护和患者调度联合优化研究

针对诊疗设备维护和住院患者候诊难以有效协调的问题,建立了联合优化模型。首先,假设设备具有离散的劣化状态,将设备的劣化过程建模为连续时间马尔可夫链;其次,考虑到患者对诊疗设备的不同功能频率需求,以及不同劣化状态对患者治疗时间、费用的影响,以患者就诊顺序、检查策略、修复策略为决策变量建立了设备维护和患者调度模型;最后,采用改进后的非支配排序遗传算法对多目标问题进行了求解。实验结果验证了设备维护与患者调度联合优化模型的有效性。改进后的算法提高了整体和局部的搜索能力,且具有鲁棒性。     

带平衡约束矩形布局优化问题的深度强化学习算法

带平衡约束的矩形布局问题源于卫星舱设备布局设计,属于组合优化问题。深度强化学习利用奖赏机制,通过数据训练实现高性能决策优化。针对布局优化问题,提出一种基于深度强化学习的新算法DAR及其扩展算法IDAR。DAR用指针网络输出定位顺序,再利用定位机制给出布局结果,算法的时间复杂度是O（n³）;IDAR算法在DAR的基础上引入迭代机制,算法时间复杂度是O（n⁴）,但能给出更好的结果。测试表明DAR算法具有较好的学习能力,用小型布局问题进行求解训练所获得的模型,能有效应用在大型问题上。在两个大规模典型算例的对照实验中,提出算法分别超出和接近目前最优解,具有时间和质量上的优势。     

LPNet: A DNN based latency prediction technique for application mapping in Network-on-Chip design

Analytical models used for latency estimation of Network-on-Chip (NoC) are not producing reliable accuracy. This makes these analytical models difficult to use in optimization of design space exploration. In this paper, we propose a learning based model using deep neural network (DNN) for latency predictions. Input features for DNN model are collected from analytical model as well as from Booksim simulator. Then this DNN model has been adopted in mapping optimization loop for predicting the best mapping of given application and NoC parameters combination. Our simulations show that using the proposed DNN model, prediction error is less than 12% for both synthetic and application specific traffic. More than 108 times speedup could be achieved using DPSO with DNN model compared to DPSO using Booksim simulator.     

Response correction techniques for surrogate‐based design optimization of microwave structures

Simulation‐based optimization has become an important design tool in microwave engineering. However, using electromagnetic (EM) solvers in the design process is a challenging task, primarily due to a high‐computational cost of an accurate EM simulation. In this article, we present a review of EM‐based design optimization techniques exploiting response‐corrected physically based low‐fidelity models. The surrogate models created through such a correction can be used to yield a reasonable approximation of the optimal design of the computationally expensive structure under consideration (high‐fidelity model). Several approaches using this idea are reviewed including output space mapping, manifold mapping, adaptive response correction, and shape‐preserving response prediction. A common feature of these methods is that they are easy to implement and computationally efficient. Application examples are provided. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Efficient design of SIW filters with knowledge‐embedded space mapping technique

This article presents an optimization technique for the design of substrate‐integrated waveguide (SIW) filters using knowledge‐embedded space mapping. An effective coarse model is proposed to represent the SIW filter. The proposed coarse model can be analyzed in the available commercial software ADS. The embedded knowledge includes not only formulas but also extracted design curves, which help to build the mapping between the coarse and fine models. The effectiveness of the proposed method is demonstrated through a design example of a six‐pole SIW filter. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

A new ECG beat clustering method based on kernelized fuzzy c-means and hybrid ant colony optimization for continuous domains

The kernelized fuzzy c-means algorithm uses kernel methods to improve the clustering performance of the well known fuzzy c-means algorithm by mapping a given dataset into a higher dimensional space non-linearly. Thus, the newly obtained dataset is more likely to be linearly seprable. However, to further improve the clustering performance, an optimization method is required to overcome the drawbacks of the traditional algorithms such as, sensitivity to initialization, trapping into local minima and lack of prior knowledge for optimum paramaters of the kernel functions. In this paper, to overcome these drawbacks, a new clustering method based on kernelized fuzzy c-means algorithm and a recently proposed ant based optimization algorithm, hybrid ant colony optimization for continuous domains, is proposed. The proposed method is applied to a dataset which is obtained from MIT–BIH arrhythmia database. The dataset consists of six types of ECG beats including, Normal Beat (N), Premature Ventricular Contraction (PVC), Fusion of Ventricular and Normal Beat (F), Artrial Premature Beat (A), Right Bundle Branch Block Beat (R) and Fusion of Paced and Normal Beat (f). Four time domain features are extracted for each beat type and training and test sets are formed. After several experiments it is observed that the proposed method outperforms the traditional fuzzy c-means and kernelized fuzzy c-means algorithms.     

On an evolutionary approach for constrained optimization problem solving

Over the last few decades, many different evolutionary algorithms have been introduced for solving constrained optimization problems. However, due to the variability of problem characteristics, no single algorithm performs consistently over a range of problems. In this paper, instead of introducing another such algorithm, we propose an evolutionary framework that utilizes existing knowledge to make logical changes for better performance. The algorithmic aspects considered here are: the way of using search operators, dealing with feasibility, setting parameters, and refining solutions. The combined impact of such modifications is significant as has been shown by solving two sets of test problems: (i) a set of 24 test problems that were used for the CEC2006 constrained optimization competition and (ii) a second set of 36 test instances introduced for the CEC2010 constrained optimization competition. The results demonstrate that the proposed algorithm shows better performance in comparison to the state-of-the-art algorithms.