PVA/UiO-66复合薄膜的制备及性能表征

采用溶剂热法合成出了金属有机骨架材料UiO-66,并通过流延法制备出了一系列PVA/UiO-66复合膜.通过红外光谱仪(FTIR)、X射线衍射仪(XRD)、扫描电子显微镜(SEM)、接触角、溶胀度、拉伸强度和透光性等表征方法,详细研究了UiO-66含量对复合膜各种物性的影响.结果表明,PVA在经富马酸交联后,耐水溶胀性...     

Determination of translucent content in mangosteen by means of near infrared transmittance

Translucent flesh disorder is undesirable in mangosteen meant for export. However, mangosteens are judged as translucent when the translucent flesh is visible on the pulp surface regardless of the quantity of the internal translucent flesh which may result in some mangosteen assessed as normal having the same amount of translucent flesh content as a mangosteen judged as translucent. The critical amount of translucent flesh to be visible on the pulp surface needs to be determined for assessment purposes. A non-destructive technique to measure the translucent content is a practical tool as the first step towards the establishment of the critical value.A non-destructive model was developed to estimate the translucent content in mangosteens using near infrared transmittance. The translucent area of the flesh section on the fruit surface was used to indicate the translucent content. The effects of the orientation of the fruit and also of the light source to the relative position of the detector as well as the effect of the measurement position of the fruit on the predictive performance were examined. The results showed that the best partial least squares model was achieved with spectra acquired from the fruit position which revealed the largest flesh segment (prediction correlation coefficient was 0.86 and root mean square error of prediction was 7.58%). The horizontal stem-calyx fruit axis and a 135° angle from the light source relative to the detector were the optimal fruit orientation and configuration for measurement.     

Spectral effects on the transmittance, solar heat gain, and performance rating of glazing systems

This study investigates the potential changes in Solar Heat Gain Coefficient (SHGC) and Visible Transmittance (VT) ratings of vertical or tilted glazing systems that would result from a deliberate change in the reference spectrum used as Spectral Weighting Function (SWF). This SWF is necessary to evaluate broadband-average optical properties from their spectral values, and obtain the desired rating of such bulk properties. The SWFs currently specified by rating institutions in Europe and North America for SHGC and VT are now outdated, and their inadequacies are discussed. Six potential replacements, which have been recently adopted by ASTM are described, including three direct irradiance spectra and three global irradiance spectrum incident on tilted surfaces of various tilts (20°, 37° and 90°). Some of these spectra have been tailored for use in building energy applications, including Building-Integrated Photovoltaics (BIPV). The effect of tilt on the U-factor and hence SHGC of glazing systems used for skylights on roofs is discussed, using a representative dataset of 37 glazing system specimens. The spectral effects on SHGC induced by a change in the current North American SWF are also obtained for this dataset, and show small to moderate deviations from current ratings (−2% to +7% for windows, and −3% to +11% for skylights). The variations in VT are within ±2% for most glazing systems. To remove the current inconsistency in the SWFs used for SHGC and VT, it is recommended that a single SWF be used for both properties. For improved accuracy and reliance on active standards, it is also recommended that the SWF for SHGC and VT be either one of the two recent ASTM G197-08 global irradiance spectra, depending on application (incidence on a vertical surface for window applications, and incidence on a 20°-tilted surface for skylight applications). No change in colorimetric calculations (based on the D65 illuminant) is recommended, however.     

Hydrophobicity and transparency of Al2O3-based poly-tetra-fluoro-ethylene composite thin films using aerosol deposition

Alumina and polytetrafluoroethylene (Al₂O₃-PTFE) composite films were fabricated by a simple aerosol deposition (AD) process, to confirm its applicability for various display screens requiring water resistant, anti-smudge and easy-to-clean properties. The surface morphologies, hydrophobic properties, and transparencies of the composite films with different PTFE contents, varying from 0.01 to 1?wt% were investigated. As a result, the composite films with over 0.3?wt% PTFE showed a sudden rise in surface roughness and low transmittance, despite having the highest contact angle of 128° at a PTFE content of 0.3?wt%. From the energy dispersive spectrometer analysis, the crash-cushioning effect of PTFE and agglomerated PTFE particles were determined to be major causes of surface roughness and opacity. In contrast, the transmittance showed a tendency to be enhanced, with an increasing PTFE content in the range of 0.01, 0.05, and 0.1?wt% PTFE, respectively. Especially, the film with 0.1?wt% of PTFE had contact angle of 111° and exhibited a high transmittance of over 75%, which was inferred to be an appropriate amount of PTFE, with a high elongation filling up the surface and the internal defects, leading to an enhancement of transparency. Consequently, these results implied that the AD-prepared Al₂O₃-PTFE composite coatings are promising candidates for various display applications.     

Growth habit and transparency of sulphate doped KDP crystal

KDP crystals were grown from the aqueous solution with different concentrations of sulphate by both the traditional temperature-lowering method and the rapid growth method. Sulphate showed a great effect on the growth and the properties of KDP crystals. With the rise of the dopant concentration, many defects occur such as mother liquid inclusions, parasite crystals and cracks. When the dopant concentration of sulphate reaches a certain value, the ultraviolet transmittance of crystals decreases a lot compared with crystals at low dopant concentration.     

Electrical, optical and morphological properties of nanoparticle indium-tin-oxide layers

Porous layers were prepared from DEGUSSA's ITO (In₂O₃:Sn) nanoparticle dispersion by doctor blading followed by annealing in air. We investigated the influence of various annealing parameters on electrical, optical and morphological thin film properties.Conductance rises with increasing annealing temperature and time by more than three orders of magnitude up to 44 Ω^− 1cm^− 1. Besides this we found an abrupt decrease in free charge carrier concentration above a critical annealing temperature of 250 °C, which leads to a step in conductance curve. In spite of particle growing during annealing no decrease in porosity was observed and in opposite to compact material, nanoparticle layers do not exhibit an appreciable shrinkage below recrystallisation temperature. These both indicate a densification hindering particle pinning effect, which is believed to be currently the main obstruction to achieve higher electrical conductivities.     

Properties of transparent conducting oxides formed from CdO alloyed with In2O3

The structure, optical and electrical properties of transparent conducting oxide films depend greatly on the methods of preparation, heat treatment, type and level of dopant. Thin films of (CdO)_1−x(In₂O₃)_x have been grown by electron beam evaporation technique for different concentrations of In₂O₃ (x = 0, 0.05, 0.1, 0.15 and 0.2). Increase of doping led to increased carrier concentration as derived from optical data and hence to increased electrical conductivity, which degraded the transparency of the films. An improvement of the electrical and optical properties of Cadmium indium oxide (CdIn₂O₄) has been achieved by post-deposition annealing. A resistivity value of 7 × 10^− 5 Ω cm and transmittance of 92% in the near infrared region and 82% in the visible region have been obtained after annealing at 300 °C for 90 min in air.     

Determining the number of layers in graphene films synthesized by filtered cathodic vacuum arc technique

We have synthesized graphene film by the filtered cathodic vacuum arc (FCVA) technique and determined the number of layers in graphene films by various techniques. Amorphous carbon (a-C) films of different thicknesses (1, 2, 3, 6, 10 and 18 nm) were synthesized by the FCVA technique on Si/SiO₂/Ni substrate and then annealed in vacuum at 800°C and cooled down to room temperature naturally to obtain graphene. Prepared graphene films were transferred on different substrates and characterized by the Raman spectroscopy, UV-VIS-NIR spectroscopy, high-resolution transmission electron microscopy (HRTEM), optical microscopy, atomic force microscopy (AFM) and sheet resistance to determine the number of layers present in the graphene films. Raman spectra of the prepared graphene films exhibit that there is red shift in the position of D, G and 2 D peak. The value of I_2D/I_G varied from 0.18 to 0.51, I_D/I_G varied from 0.82 to 1.02 and full width at half maximum of 2 D peak varied from 101.2 to 128.0 cm^?1, for different thicknesses of graphene films, respectively. The value of transmittance decreases from 97 to 63.7% and that of sheet resistance increases from 460 to 1400 Ω/square with the increase in the thickness of the prepared graphene film. The HRTEM and AFM study revealed that the graphene synthesis from 1 nm thick a-C film possesses a single layer structure.     

溶胶—凝胶法制备掺入金胶粒的非线性光学凝胶玻璃

以柠檬酸酸钠还原氯金（Ⅲ）酸，得到金的胶体溶液。以正硅酸甲酯为先驱体，经溶胶－凝胶法，使金胶粒均匀地分布到二氧化硅凝胶中，制出了具有一定机械强度的凝胶玻璃片，并对其进行了透光率及三阶非线性性质的研究。结果表明其三阶非线性极化率Ｘ＾（３）在１０＾－１２ｅｓｕ数量级。     

工艺条件及稳定剂对CPVC透光率的影响

研究混料时间、混料温度、热稳定剂含量和模压时间对氯化聚氯乙烯(CPVC)透光率的影响,并通过正交试验法优化其加工工艺条件与热稳定剂含量。首先通过单因素实验研究了每个因素对实验结果的影响,并在每组实验中选取3个最优水平,然后通过正交试验法优化最佳实验条件。结果表明,适度提高混料时间、混料温度、热稳定剂含量和模压时间,有助于提高CPVC的透光率。正交试验结果表明最佳条件为:混料时间5 min,混料温度190℃,有机锡含量5%,模压时间5 min。在该实验条件下,制得的CPVC透光率为85.6%。