基于MSP430的低功耗近距无线图像传输系统设计与实现

近距无线图像传输系统主要用于无线传感器网络中的图像采集、传输、处理和显示,本文设计并实现了一种具有较强实用性的近距无线图像传输系统。采用OV7670图像传感器作为图像数据采集器,高速低功耗的nRF24L01射频模块作为无线收发器,采用MSP430F14916位超低功耗单片机作为微处理器,所构成的系统具有功耗低、图像传输速度快等优点。作者详细阐述了该系统的硬件结构和软件设计。     

Stress relaxation behavior of Ti-6Al-4V alloy

1　INTRODUCTIONTi 6Al 4VisoneofthemostimportantTial loys[1,2 ] .Butthisalloyhasbadformabilityforitshighelasticresilience .Therefore ,hotsizingisimpor tant[36 ] .Asthebaseofhotsizing ,thestudyofstressrelaxationhasimportanttheoreticalvalueandpracticalsignificance .Ontheotherhand ,Ti 6Al 4Visusedasfastenermaterialssometimes .Whenthefastenersworkatthetemperaturehigherthanroomtemperature ,stressrelaxationmayresultsinacci dents .Sohowtopreventthestressrelaxationisveryimportant[7] .Uptonow ,…     

3Cr2W8V钢锻件表面裂纹的成因及预防措施

通过对难变形钢3Cr2W8V进行实验,证明了合理地选择锻造工艺参数,也是解决表面裂纹的重要途径之一。     

Study On the Tribological Behavior of the Arc-added Glow Discharge Plasma Non-hydrogen Carburization On Titanium Alloy Surfaces

This paper introduces a new titanium alloys surface strengthening treatment by using the arc-added glow discharge plasmas non-hydrogen carburization technique. High purity and high strength graphite is selected as cooling cathode arc source for supplying carbon atoms and particle, which migrate to the titanium alloy(Ti6Al4V) surface and form modified layer. Thus, the hydrogen embrittlement is avoided while the tfibological behavior of the titanium alloy surface is improved in the respects of anti-friction and anti-wear ability.The tribological behavior of the modified layer under dry sliding against SAE52100 steel was evaluated on a ball-on-disc test rig. The results showed that the modified layer obtained a thickness of 30μm at 980℃, 30minutes. The microhardness of the Ti6Al4V alloy surface attained 936 HV, which was much larger than that of the Ti6AI4V alloy. The Ti6AI4V alloy was characterized by adhesion wear and scuffing under dry sliding against the steel, while the surface modified layer experienced much abated adhesion wear and scuffing under the same testing condition. This could be attributed to the carbon dement with different modalities exists in the modified layer.The modified layer showed good friction-reducing and fair anti-wear ability in dry sliding against the steel. Using the SEM,XRD and XPS, the phase structure and morphology of the carburization modified layer was analyzed.     

一种检测电火花加工间隙状态的柔性方法

介绍了一种在数控电火花加工脉冲电源中实现间隙状态检测的柔性方法，具有阈值设置柔性、状态识别准确的特点，巧妙地用一个稳压二极管的钳位作用提高了间隙状态识别的精度，非常适合需经常改变加工参数的加工实验使用。     

Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy

The deposition of titanium on a titanium alloy substrate is being examined for potential use as a surface treatment for medical prostheses. A Ti6Al4V alloy was coated with pure titanium by cold gas dynamic spraying. Coatings were deposited onto samples with two different surface preparation methods (as-received and grit-blasted). The fatigue life of the as-received and grit-blasted materials, both before and after coating, was measured with a rotating-bend fatigue rig. A 15% reduction in fatigue endurance limit was observed after application of the coating to the as-received substrate, but no significant reduction was observed on its application to the grit-blasted substrate. The reduction in fatigue endurance limit has been related to the substrate-coating interface properties, the elastic modulus, and the residual stress states. This article was originally published inBuilding on 100 Years of Success, Proceedings of the 2006 International Thermal Spray Conference, (Seattle, WA), May 15–18, 2006, B.R. Marple, M.M. Hyland, Y.-Ch. Lau, R.S. Lima, and J. Voyer, Ed., ASM International, Materials Park, 2006.     

Enhancement by SO2 of initial activity for selective catalytic reduction of NO with CH3OH over \gamma-alumina

The effect of SO₂ on catalytic activity for NO reduction to N₂ by methanol in excess oxygen over $\gamma$ -alumina has been investigated. SCR activity increased initially upon exposure of a fresh $\gamma$ -alumina catalyst to SO₂ which is attributed to formation of Brønsted acid sites. Longer exposure to SO₂ leads to a decline in catalytic activity to a lower steady-state NO_x reduction activity which is independent of the SO₂ content in the feed gas.     

基于Linux+ARM的多格式视频图像采集系统的设计

设计了基于S3C2440微处理器的视频图像采集系统,详细分析了该系统的启动过程。在一块裸板上搭建起整个视频图像采集系统。结合V4L2技术完成了支持YUV、MJPEG图像格式的USB摄像头和支持RGB图像格式的CMOS摄像头的多格式视频图像采集系统。测试结果表明,该系统可以在LCD显示屏上动态显示多格式摄像头所采集到的视频图像,且视频图像具有清晰度高、流畅性好、稳定性强等特点,具有进一步推广使用的广阔前景。     

Ultrasonic spray pyrolysis of nano crystalline spinel LiMn2O4 showing good cycling performance in the 3 V range

Spherical lithium manganese oxide spinel was synthesized by an ultrasonic spray pyrolysis method, and has been characterized using X-ray diffraction, scanning electron microscopy, transimission electron microscopy and electrochemical cycling at 3 V regions. The LiMn₂O₄ powders were composed of about 10 nm-sized primary particles. The delivered discharge capacity of the synthesized nano-material was 125 mAh g⁻¹ between 2.4 and 3.5 V and its retention was about 96% upon 50 cycling. From the high resolution transmission electron microscopic study, it was found that structural transition of the parent material did not occur even after the 50th electrochemical cycling on the 3 V region. It seems that the reversible structural change is possible for nanocrystalline LiMn₂O₄ as observed by the X-ray diffraction and transition electron microscopic observations.