纳米ZnO薄膜制备及液态源掺杂

用真空蒸发法在玻璃和单晶硅片 (10 0 )上制备Zn薄膜 ,然后对Zn薄膜进行氧化、热处理获得纳米ZnO薄膜。对在硅片上制备的Zn薄膜一次性进行高温掺杂、氧化获得纳米ZnO∶P和ZnO∶B薄膜。研究不同氧化、掺杂温度和时间对薄膜结构、电学性能的影响。结果表明 :氧化温度和时间对ZnO薄膜结构影响较大 ,液态源掺P可明显改善纳米ZnO薄膜的导电性能、结构特性和化学组分     

Drying of Probiotics: Optimization of Formulation and Process to Enhance Storage Survival

This work describes how probiotic bacteria can be dried at low temperature in two steps, combining spray drying and vacuum drying, in order to enhance their survival during storage. A sufficient number of dried probiotics survived storage for more than 3 months at 30°C, if an appropriate combination of protein and carbohydrate was selected as carrier and storage conditions were maintained optimal. The use of soy protein and maltodextrin or skim milk and arabic gum resulted in the best survival rates of probiotics during storage. No evident difference was found between different spray dryer configurations, although a cocurrent flow was preferred.     

微密封真空微电子二极管

本文介绍了一种微密封真空微电子二极管的工艺及实验结果。     

Optimizing the Vacuum Heat-Treatment of Hot-Work Tool Steels by Linear Elastic Fracture Mechanics

Linear elastic fracture mechanics was used to optimize the vacuum heat-treatment procedures for conventional hot-work AISI H11 tool steel. The fracture toughness was determined with non-standard, circumferentially notched and fatigue-precracked tensile-test specimens. The fracture-testing method is sensitive to changes caused by variations in the microstructure resulting from the austenitizing and tempering temperatures as well as the homogeneity of the material itself. The combined tempering diagram- Rockwell-C hardness, Fracture toughness K_Ic, Tempering temperature was used for the choice of the vacuum heat-treatment parameters necessary to obtain the best properties for a given application with respect to the investigated steel.     

大庆油田助剂厂3500kt／a常减压减压塔的管道设计

简述了大庆油田助剂厂3500kt/a常减压减压塔的管道布置设计特点,体现出塔类设备的管道设计原则,并结合管道设计的经济性、安全性展开论述。     

VFD GU384x32L-3900模块特性及应用

GU384x32L-3900是一款内藏驱动电路的、384×32点阵式VFD显示模块。介绍了GU384x32L-3900模块的基本结构及软件编程、硬件应用等特性并探讨了其在实际中的应用。     

有杆泵抽油系统可靠性分析

抽油机井有杆果采油装置检泵故障数据的特点在于相邻两次检泵间隔之间的时间并非总是来自同一总体，可能有某种趋势的变化。通过对故障数据的趋势性检验，可验证其对某一随机过程模型的适应性，从而判定某一口井或某一批工况大致相同油井的运行可靠性，实现对生产井运行可靠性的定量评估。还通过实例说明了有杆泵抽油系统检泵故障数据的可靠性分析方法。     

WC/Ni60真空熔烧涂层的组织结构特性

研究了真空熔烧WC Ni60复合涂层的显微组织结构特性 ,并测定了沿层深方向的显微硬度分布。研究结果表明 ,涂层与母材 4 5钢在界面处形成牢固的冶金结合 ,界面两侧的显微硬度呈连续性分布     

钢丝绳抽油杆抽油超冲程分析

通过对钢丝绳抽油杆和常规钢杆振动模型固有频率的分析，从理论上分析了钢丝绳抽油杆和常规钢杆振动形成谐振(超冲程)的奈件；同时讨论了振动阻尼系数对共振的影响关系，从理论上得出了钢丝绳抽油杆在抽油时更易形成超冲程，进而从理论上解释了钢丝绳抽油杆在抽油过程中的泵效较高的事实，进一步解释了当前人们对钢丝绳应用和研究中的一些疑点和难点，为钢丝绳抽油系统的设计和应用提供了重要的理论指导。     

大港渣油掺兑催化油浆氧化沥青的研究

重油催化裂化外甩油浆中富含芳烃，可望在国产原油生产优质道路沥青上发挥作用。对大港环烷基渣油中掺兑一定比例的油浆后氧化改善道路沥青性质的可能性进行了研究，结果表明：渣油掺兑油浆氧化，不仅可以有效改善沥青延度，同时也为油浆的合理利用开辟了一条新途径。