真空蒸馏脱硒的研究

本文从理论上分析了真空蒸馏脱Se的影响因素时间和温度,并通过实验给予验证,提出了最佳条件,对工业采用真空蒸馏脱出含Se物料中的Se具有一定的指导性。     

全封闭Ar气保护电渣重熔GH4169合金

上海五钢采用ALD 5t全封闭Ar气保护电渣重熔炉 ESR(Ar)冶炼了GH4 16 9合金锭 ,分析结果表明 ,ESR(Ar)电渣锭氧、硫含量和锭头尾碳、铝、钛之差远低于一般ESR工艺 ;VIM(真空感应熔炼 ) +ESR(Ar)工艺冶炼合金中平均氧含量 6× 10 - 6 远低于VIM +VAR(真空电弧重熔 )工艺冶炼合金中平均氧含量 13× 10 - 6 ,所以ESR(Ar)工艺脱氧效果优于VAR工艺     

Experimental Investigation of the Recovery of Soaked Paper Using Evaporative Freeze Drying

The aim of this article is to develop an experiment and a procedure to investigate the restoration of water-damaged paper and archival materials using freeze drying in order to allow a reproducible test and comparison of the influence of different operating conditions on drying time and restored paper quality. Firstly, a reproducible method for the preparation of soaked samples simulating water-damaged paper has been developed. Then, the samples have been freeze-dried in a laboratory-scale apparatus that allowed monitoring the temperature as well as the weight of the samples. The technique of evaporative freezing, which reduces the drying time required, has been used in this case. An innovative procedure for the visualization of the progress of the drying process has been validated, thus allowing the validation of a simple phenomenological model of the time evolution of the ice core volume; in addition, data on the residual moisture of the dried paper sheets in different zones have been given. Finally, optimization of this particular drying process by using simple or more sophisticated approaches has been discussed.     

电熨斗底板水溶性聚四氟乙稀真空静电喷涂工艺

介绍了电熨斗底板真空静电喷涂的工作原理。说明了电晕放电在底板真空静电喷涂中的作用。分析了氟涂料微粒的带电过程及影响因素。这个工艺对产品质量提高的作用进行了分析。     

真空微电子三极管几何参数的设计考虑

真空微电子三极管是近年来兴起与发展的真空微电子学中的一类重要器件。本文从真空微三极管的工作特性出发,分析了这类器件中所需考虑的几何参数和工作特性的关系,并给出了一些理论和实验公式,为今后的设计提供一些参考。     

Enzymatic Firming of Processed Red Pepper by Means of Exogenous Pectinesterase

The objective of this investigation was to demonstrate that the firmness of a commercial vegetable product, diced and frozen red pepper (Capsicum annum var. Sendt), could be improved by the use of exogenous pectinesterase in an industrially relevant process. The diced pepper pieces 10 × 10 × 7 mm³ were infused under vacuum with a commercially available pectinesterase. The range of optimal process conditions was: 15-20°C, 45 min infusion time, a 10-25 mM CaCl₂ infusion brine, a w/w ratio of pepper fruit to infusion brine of 1.5:1, and an enzyme dosage of 30-60 pectinesterase units (PEU) per kg pepper fruit. The firmness as measured by back extrusion was improved by a factor of two to three. The effect of firming was robust and conserved after freezing and heating in a simulated household cooking process. The firming process seems easily adaptable to industrial conditions and may be applicable to other vegetable and fruit products.     

内摩擦副式抽油杆扶正器的研制与应用

常规抽油杆扶正器随着抽油杆运动,造成扶正器与油管内壁摩擦,磨损速度快,搅拌井筒内原油加剧原油乳化,在高造斜、大斜度稠油井其问题更加突出.文章研究了内摩擦副式抽油杆扶正器,其特点是摩擦副摩擦阻力小、扶正套相对油管内壁运动少、磨损慢.在胜利桩139陆上丛式井组应用16口井,检泵周期可延长200 d.     

抽油杆尼龙扶正器的研制与应用

分析了油管和抽油杆产生偏磨的原因，指出防止油管和抽油杆偏磨的有效措施是采用抽油杆扶正器。针对现有扶正器存在的问题，研制了具有扶正和刮蜡功能的新型抽油杆尼龙扶正器。新型扶正器分活动式和热固式两种。前者是由形状相同、内壁带凸校的两部分扣在一起，靠锁齿锁紧固定在抽油杆杆体上，而后者是将扶正器注塑在抽油杆杯体上。介绍了两种新型扶正器的规格和主要技术指标。热固式尼龙扶正器的现场使用情况表明，抽油杆断脱率大大降低，油管断裂、穿孔事故减少，检泵周期延长。     

管杆漏磁探伤现场应用中的问题及对策

阐述了漏磁探伤漏磁场沿管、杆径向的分布特征 ,分析了影响探伤装置漏磁检测准确性的 4个因素 ,验证了信号提离距离的变化对传感器和探伤装置灵敏度的影响。针对在用的大多数浮动式传感器固定机构存在的两个严重缺点 ,提出采用自定位传感器固定机构 ,可消除机械装置对传感器灵敏度的影响。提出了一套标定和校验检测装置的方法 ,以保证探伤仪器的检测灵敏度始终恒定 ,提高检测结果的准确性和可靠性。     

Rapid Prototyping and Tooling of Custom-Made Tracheobronchial Stents

Rapid prototyping (RP) and rapid tooling (RT) techniques can be applied to the field of medicine primarily because of their ability to produce customised profiles and geometries in relatively short lead times. In this paper, the process by which these techniques can be applied for the production of customised tracheobronchial stents for the purpose of maintaining patency in an occluded respiratory tract is described. A comparison of RP systems was carried out to establish the preferred RP method to produce the master model. The vacuum casting RT process was then used to produce the stent.