06NiCuCrMoNb钢高温加热时表层铜的行为

将06NiCuCrMoNb钢试样在不同的加热温度保温不同时间后，观察并分析试样表层的形貌和成分。结果表明，在一定条件下铜会扩散进入表层奥氏体晶界，得到沿奥氏体晶界分布的富铜相，并在热变形加工时导致热脆。试验得到了沿奥氏体晶界分布的富铜相与加热温度和保温时间的关系。     

On the dissipation process in Bi2Sr2Ca2Cu3O10 tapes and bulk samples with preferential grain orientation in zero external magnetic field

Current-voltage characteristics of Bi₂Sr₂Ca₂Cu₃O₁₀ tapes and bulk samples with preferentially oriented crystallites have been measured in zero applied magnetic field and for temperatures close to the mean-field critical-temperature,T _c0. It was shown that the power-law dependence,V=AI ^a, valid for two-dimensional systems, does not correctly describe the data, which clearly indicate the existence of a finite critical-current density,J _c. The experimentalI-V curves are fitted quite well with the model which attributes the finite critical-current density to the coupling between the CuO₂ double layers. It was found thatJ _c vanishes at a temperature value belowT _c0. This behavior can result from the occurrence of vortex fluctuation-induced layer decoupling and/or from the contribution of entropy to the vortex unbinding process.     

34CrMoV结构钢动态再结晶行为研究

应用Gleeble-1500热模拟实验机进行等温压缩试验,研究了变形工艺参数对34CrMoV结构钢动态再结晶行为的影响.结果表明,其流变应力随变形温度升高而降低,随应变速率提高而增大;随着应变速率的降低,应变量的增加和变形温度的升高,动态再结晶速度加快且奥氏体晶粒得到细化.     

C pm MPPAC for manufacturing quality control applied to the precision voltage reference process

The multiprocess performance analysis chart (MPPAC) based on the process capability index C_pm, called C_pm MPPAC, is developed for analysing the manufacturing quality of a group of processes in a multiple process environment. The C_pm MPPAC conveys critical information of multiple processes regarding the departure of the process and process variability from one single chart. Existing research works on MPPAC are restricted to obtaining quality information from one single sample of each process ignoring sampling errors. The information provided from existing MPPAC charts, therefore, is unreliable and misleading and results in incorrect decisions. In this paper, we consider the natural estimator of C_pm based on multiple samples. Based on the natural estimator of C_pm, we consider the sampling errors by providing an explicit formula with the Matlab program to obtain the estimation accuracy of the C_pm. We tabulate the sampling accuracy of C_pm for sample size determination so that the engineers/practitioners can use it for their in-plant applications. An example of multiple precision voltage reference (PVR) processes is presented to illustrate the applicability of C_pm MPPAC for manufacturing quality control.     

复相陶瓷导电性与其粒径级配的关系研究

通过对无序渗流模型的修正，建立了具有不同特征尺寸的两相无序体系的导电模型，推导了相关关系式，将其结果与相复合导电陶瓷的实验结果进行了比较，结论相当一致。由此揭示了陶瓷生料的两相粒径分布对复合导电陶瓷导电性的影响。     

钻井岩屑粒径分布规律的研究

钻井振动筛是固控系统的重要分离设备,其主要任务是清除钻井液中直径大于74μm的固相颗粒。对辽河油田7口井深0～3500m的钻井岩屑进行了实地取样,分析了岩样颗粒直径大于74μm的粒径分布特征。分析结果表明,钻井岩屑具有明显的片状特征,颗粒的粒径分布主要与地层岩性和破岩工具有关,随着井深的变化,其岩样粒径分布呈现出幂分布、2分布和瑞利分布等3组典型规律。给出了岩屑颗粒的概率直径;建议在筛面颗粒运动特性研究、筛网工作载荷的计算和激振方式的选择中,应考虑岩屑颗粒片状特性的影响。     

Using the high pressure methane isotherm for determination of pore size distribution of carbon adsorbents

A method of determining pore size distribution, PSD, of carbon adsorbents based on the high pressure methane isotherm is presented. A generic software package, and an IBM compatible PC, have been used to search for a PSD in the form of a histogram. The method relies on a known local isotherm, in this case, assuming a simplified model of infinite slit shaped carbon pores.Three carbons, having very different pore structures: BPL, PX-21, and PVDC, were analyzed using the new method and the results compared with those obtained from subcritical Ar, and N₂ isotherms. The analysis from the high pressure methane isotherm gave results which are different than those from the low pressure low temperature isotherms but not significantly enough to be unrealistic.     

AN EXPERIMENTAL INVESTIGATION OF THE GROWTH OF SMALL CORNER FATIGUE CRACKS IN ALUMINIUM 6061-T651

Results of an experimental investigation of the fatigue growth of small corner cracks emanating from small flaws are presented. Growth-arrest behaviour was observed, and increases in crack length during growth periods were of the order of the transverse grain size. For the test material, the corner crack front intersects, on average, only three–six grains in the small crack regime monitored, so only a small number of constrained, interior grains is encountered. It is suggested that the presence of partially constrained surface grains may contribute to the 'anomalous' growth behaviour which has been observed by a number of investigators.
The crack growth histories of the test data presented exhibit considerable scatter. It is shown that a Student's t -test can be used to estimate confidence intervals in order to provide a measure of the observed scatter. The variation in confidence intervals in the transition from small to long fatigue crack growth is discussed.     

烧结直接淬火对WC－TiC－Co合金WC相微观结构及力学性能的影响

本文以ＴＥＭ和ＸＲＤ为主要手段，研究ＷＣ－ＴｉＣ－Ｃｏ硬质合金（ＹＴ１４）在直接淬火后ＷＣ相的微观结构和微观应力，比较了常规烧结态与淬火态试样ＷＣ相之间的差异，探讨了直接淬火对合金力学性能的影响。结果表明，在保持合金其他性能不降低的同时，直接淬火的抗弯强度比常规烧结提高２８％左右。并首次发现，经直接淬火热处理的ＹＴＩ４合会中与Ｃｏ相相邻的ＷＣ晶粒边界出现滑移台阶，这是淬火过程中热应力使ＷＣ晶粒内位错在｛０００１｝密排面聚集，并可能沿｛０００１｝＜１１２０＞易滑移系统强滑移的结果。直接淬火试样的微观应力比重新加热淬火的低。     

论当前粮食仓储工作中的几个问题

本文结合湖北实际,对粮食仓储工作的现状进行了分析,指出了当前存在而应在“八五”期间加以解决的粮仓建设、粮库改革、科学研究、四无粮仓、人才培训五个问题。提出了粮仓建设的量化意见,讨论了粮库改革的方向、储粮科学研完的重点、坚持四无粮仓和提高人员素质的重要性。