Modeling the dynamic properties of fibre-reinforced concrete with different coating technologies of multifilament yarns

The dynamic behaviour of fibre-reinforced, cementitious composite materials is gaining increasing interest. With respect to service life dynamic loading just under the elastic limit of the material at hand is relevant to practical applications, for the resulting (stress-)waves may be focused within regions of the heterogeneous composite material. This local overstraining of the material may lead to deterioration of the structural element. In this contribution, the effect of the set-up of the reinforcing fibres on the wave scattering behaviour is investigated. Special attention is paid to layered centric configurations of these fibres, as it occurs e. g. within textile-reinforced concrete (TRC). A mechanical model is developed and solved analytically providing an efficient and robust method to describe the dynamic behaviour of given fibre configurations. This method is needed for materials which have to be described mechanically before the manufacturing process – as it is the case for TRC. The proposed model also allows for planning experiments and thus is of additional value. It is shown that the inner structure of the fibres does influence the amplitude response spectra and consequently the proposed method also may be used for non-destructively detecting the inner structure of the multifilament yarns and other related objects.     

Frequency dependent directivity of periodic permanent magnet electromagnetic acoustic transducers

Beam steering has been achieved using shear horizontal waves generated using a periodic permanent magnet (PPM) electromagnetic transducer (EMAT). Unlike phased arrays, where steering is achieved by carefully controlling the firing of individual elements, the spatial periodicity of the PPM EMAT is ultilised to steer the beam whilst exciting all elements simultaneously. Due to the periodic nature of the array, the interference of individual waves from each of the elements creates a highly frequency dependent angle of propagation, allowing the directivity to be changed by simply varying the frequency of the input signal. Simultaneous excitation precludes the need for complicated and expensive phased array hardware. A frequency domain model is developed so that the beam characteristics, such as steering angle and beam width, can be calculated, allowing for investigation into the beam steering qualities of the PPM transducer. Broadband pulsed generation is also demonstrated, showing how a wave is generated over a large range of angles, meaning a large area can be covered with a single pulse. Interesting properties of this wave, such as a variation of frequency as a function of angle, and how this can be useful, are also discussed.     

Estimation of the wave energy conversion efficiency in the Atlantic Ocean close to the European islands

This paper presents an evaluation of the efficiency of twelve state of the art wave energy converters in the Atlantic Ocean, in the vicinity of the most important European islands and archipelagos (Iceland, Archipelago of Azores, Madeira Archipelago and Canary Islands). An analysis of the wave conditions in the target areas was first performed by considering a 10-year interval (2004–2013) of wave data provided by the European Centre for Medium-Range Weather Forecasts. For this reason, twenty reference points, all located in water depths of about 50 m, were defined. In order to provide a general picture of the wave potential and also to highlight the presence of some hot spots, several wave parameters, such as significant wave height, mean wave direction and wave power, were evaluated. Then, for every nearshore area, based on the bivariate distributions of the sea states occurrences and also on the power matrix of each device, the performances of each wave energy converter were estimated in terms of the expected electrical power. The results of the present work provide valuable information for the future wave farm projects, which could become in the near future a reliable and effective way to produce energy in island environments.     

Categorization of seismic sources by auditory display: A blind test

Recordings of the Earth's surface oscillation as a function of time (seismograms) can be sonified by compressing time so that most of the signal's frequency spectrum falls in the audible range. The pattern-recognition capabilities of the human auditory system can then be applied to the auditory analysis of seismic data. In this experiment, we sonify a set of seismograms associated with a magnitude-5.6 Oklahoma earthquake recorded at 17 broadband stations within a radius of ∼300 km from the epicenter, and a group of volunteers listen to our sonified seismic data set via headphones. Most of the subjects have never heard a sonified seismogram before. Given the lack of studies on this subject, we prefer to make no preliminary hypotheses on the categorization criteria employed by the listeners: we follow the “free categorization” approach, asking listeners to simply group sounds that they perceive as “similar.” We find that listeners tend to group together sonified seismograms sharing one or more underlying physical parameters, including source–receiver distance, source–receiver azimuth, and, possibly, crustal structure between source and receiver and/or at the receiver. This suggests that, if trained to do so, human listeners can recognize subtle features in sonified seismic signals. It remains to be determined whether auditory analysis can complement or lead to improvements upon the standard visual and computational approaches in specific tasks of geophysical interest.     

Wave climate analysis for the design of wave energy harvesters in the Mediterranean Sea

The objective of this paper is to provide a synthetic tool for determining expeditiously the wave climate conditions in several areas of the Mediterranean Sea. In the open literature, several authors have already conducted this specific analysis also for the area under examination in this paper. However, the need of discussing aspects strictly related to the design of wave energy harvesters is still relevant. Therefore, considering the variety of devices and the amount of information needed for conducting both an energy-wise optimization and a structural reliability assessment, a holistic view on the topic is provided. Specifically, the paper elucidates the theoretical aspects involved in the estimation of wave energy statistics and in the calculation of relevant return values. Next, it provides synthetic data representing the mean wave power and the return value of extreme events in several coastal areas of the Mediterranean Sea. In this regard, the paper complements information available in the open literature by discussing the influence of the directional pattern of the sea states in the determination of sea state statistics as well as in the design of a wave energy harvester.     

Decadal variability of wave power production in the North-East Atlantic and North Sea for the M4 machine

We look at the variability of the power produced by the three-float M4 wave energy converter for locations in the North-East Atlantic and North Sea using the NORA10 hindcast data from 1958−2011. The aim is to investigate whether the produced power is also strongly affected by the climate variability (such as the North Atlantic Oscillations) in the winter, just as the ocean wave power resource as observed in previous studies. In this study, we demonstrate the use of proxy indices in combination with the climate indices to reconstruct a historic practical wave power climate from 1665−2005. We also conduct sensitivity studies to assess the changes in the practical wave power variability in response to perturbing the machine size, the power take-off coefficient, the response bandwidth and the power limit of the power take off. We find that the resultant temporal variation is still dominated by the climate variability. However, the overall variability important for power availability and energy supply economics is smaller than that of the ocean wave power resource because of the finite capture bandwidth of the M4 machine. The statistical methodology presented here is also potentially relevant to other wave energy converters in similar locations.     

Oscillating-water-column wave energy converters and air turbines: A review

The ocean waves are an important renewable energy resource that, if extensively exploited, may contribute significantly to the electrical energy supply of countries with coasts facing the sea. A wide variety of technologies has been proposed, studied, and in some cases tested at full size in real ocean conditions. Oscillating-water-column (OWC) devices, of fixed structure or floating, are an important class of wave energy devices. A large part of wave energy converter prototypes deployed so far into the sea are of OWC type. In an OWC, there is a fixed or floating hollow structure, open to the sea below the water surface, that traps air above the inner free-surface. Wave action alternately compresses and decompresses the trapped air which is forced to flow through a turbine coupled to a generator. The paper presents a comprehensive review of OWC technologies and air turbines. This is followed by a survey of theoretical, numerical and experimental modelling techniques of OWC converters. Reactive phase control and phase control by latching are important issues that are addressed, together with turbine rotational speed control.     

Development of a novel point absorber in heave for wave energy conversion

This paper presents an advanced design methodology for electric power generation from the vast ocean wave energy. A novel single-buoy heaving device called wave energy converter (WEC) based on hydrostatic transmission (HST), or can be shortened as HSTWEC, is proposed to convert mechanical energy generated by ocean waves into electric energy. Modeling and simulations with both regular and irregular waves were then carried out to investigate working performances of the designed HSTWEC. The results showed that more than 78% of wave energy can be absorbed. In addition, an adaptive controller was designed to improve the performance of the suggested device. Effectiveness of the overall HSTWEC control system was finally proved by simulations.     

COMPUTER AIDED DESIGN OF HORN RADIATORS FOR SATELLITE COMMUNICATION BY LEAST SQUARES OPTIMIZATION

Computer aided design optimization of corrugated horns became a powerful tool to reduce development costs on the one hand and to improve performance of space antennas on the other. In this paper the physical model is outlined, based on Maxwell's equations, and it is shown how a complete numerical simulation of a circular corrugated horn can be achieved, assuming that the interior geometry of the horn is known. In order to compute the electromagnetic properties of a horn, the so-called scattering matrix is assembled. This matrix is needed to relate mode amplitudes of reflected and transmitted waves in horn sections with different diameters. Envelope functions, determined by a few geometric design parameters, are used to describe the inner geometry of a horn. These parameters are applied to formulate a least squares optimization problem. As a starting point, an amplitude spectrum in the aperture has to be determined which radiates a given far field. The differences between those amplitudes and the amplitudes predicted by the model are to become as small as possible by adapting the design variables. Moreover, the return loss is to be minimized. The resulting least squares optimization problem can be solved by a standard sequential quadratic programming (SQP) code after a suitable transformation into a nonlinear programming problem, by which typical features of Gauss-Newton methods are retained. Some numerical results are included to show the successful application of the introduced advance to design a circular corrugated horn which radiates a given far field.     

Speed control of oil-hydraulic power take-off system for oscillating body type wave energy converters

The variable displacement oil-hydraulic pumps for the Power Take-Off (PTO) of wave energy converters must work above 80% of maximum displacement in order to have an overall efficiency of approximately 94.5%. This is achieved by controlling their rotational speed when the oil-hydraulic power fluctuates in time. Three speed control strategies have been presented, the first fixing the maximum possible speed in each sea state, the second by slowly varying the pump speed between speed peak values and average ones, and the third by working with highly variable speed reference values. The worst pump efficiency is achieved with the first strategy while the best one with the third strategy. However, the first has less impact than the third one in the pump lifecycle. On the other hand, the second strategy is used to make a trade-off between pump efficiency and lifecycle. However, this paper presents a fourth speed control strategy, which is a hybrid of the second and third strategies. So, the objectives of this paper were to know if these strategies are implementable in a test rig and also on a new PTO concept and determining what modifications should be introduced in these PTO strategies and hardware. This paper also contributes with the application of new methodologies in this field of research for the modelling of pump efficiency and pressure control, such as Neuro-Fuzzy modelling and Fuzzy Logic control systems.