Results from the monitoring of pesticide residues in fruit and vegetables on the Danish market, 2000-01

To check compliance with the maximum residue levels in foods and to monitor the residue levels to enable an evaluation of the exposure of the Danish population to pesticides, a monitoring programme for pesticides residues in fruit and vegetables was performed. Sampling plans were designed based on previous findings and on consumption data. Samples (n = 4404) of mainly fresh conventionally and organically grown fruit and vegetables were collected at wholesalers and importers and at food processing companies. Of the samples, 3% were frozen products and 5% organically grown. Of the samples, 34% were of Danish origin, with 66% from other countries. Two accredited laboratories performed analyses of the samples using capillary gas chromatography, liquid chromatography and a spectrophotometric method. Reporting levels were set at the lowest calibration level or at the limit of determination. Residues were found in 60% of the samples of fruit but in only 18% of the vegetable samples. Residues above the maximum residue levels were found in 6% of all samples of fruit and in 2% of the vegetable samples.     

Tribological behavior of PTFE nanocomposite films reinforced with carbon nanoparticles

Carbon-based nanoparticles synthesized by heat treatment of nanodiamond in the temperature range of 1000–1900 °C were added to PTFE film to investigate the structural effect of the carbon particles on the tribological properties of PTFE composite film. Carbon-based nanoparticles were prepared by milling with micron sized beads in chemically treated water before their addition to PTFE film. The wear and frictional properties of PTFE nanocomposite film were measured by the ball on plate type wear test. The wear resistance of PTFE film was found to be enhanced by the addition of 2 wt% of carbon nanoparticles. The wear coefficient of PTFE film was decreased from 16.2 to 3.5 × 10⁻⁶ mm³/N m by the addition of carbon-based nanoparticles heat-treated at 1000 °C. Increasing the heating temperature of the nanodiamonds caused the extent of aggregation and particle size to increase. The wear resistance of PTFE nanocomposite film was enhanced by the addition of nanodiamonds heat-treated at 1000 °C, but decreased when the heat treatment temperature of carbon nanoparticles was further increased. Tribological behavior of PTFE nanocomposite films depending on the types of carbon nanoparticles were explained based on the structural, physical and chemical modification of carbon nanoparticles.     

无氢类金刚石碳膜的研究进展

介绍了无氢类金刚石碳膜的制备方法 ,它们的机械、光学、电学性能 ,将无氢与含氢的类金刚石碳膜进行了简单比较 ,总结及探讨了它们的应用     

S—135钢板热轧工艺研究

S—135钢板是水电站用高强耐磨不锈钢板,既要求强度高、韧性好,又要求耐磨、耐蚀性强,生产难度较大。除我厂外,目前国内尚无其它厂家能够生产这种钢板。该钢板在加热轧制,冷却过程中要解决很多技术难点。我们通过采用特殊的控制轧制和控制冷却工艺,很好地解决了诸多技术难点,使S—135钢板的开发研制取得了成功。为电站用高强度耐磨不锈钢生产提供了宝贵的经验,也为控制轧制及控制冷却技术在中板生产行业的应用起到了积极的推动作用。     

煤矿微机安全生产监测监控系统

本文介绍了分站式系统、无分站式系统以及复全式系统的特点，主要论述了复合式微机安全生产监测监控的结构、性能和应用。     

无线传感器网络（WSN）在花卉大棚环境监测中的应用研究

针对传统花卉大棚环境参数监测系统的某些缺点,本文对基于Zigbee技术的无线传感器网络在花卉大棚中的应用可行性进行分析和研究,并建立了花卉大棚无线环境监测系统,使得该监测系统的各节点位置、监测范围、节点扩展性、节点间距离都得以改善和提高。     

物联阿技术在电梯监测报警管理系统中的应用

本文首先对当前城市电梯运营状况作了分析,然后对利用物联网技术监测与管理电梯的必要性进行了探讨。介绍了物联网技术在城市电梯监测报警管理系统中的应用原理,重点描述了无线监测终端的设计和功能。     

基于LABVIEW的电能质量在线监测和分析

本文讨论了国家标准规定的电能质量参数的计算方法,并利用LabVIEW创建了频率、谐波、三相不平衡度的测量和数据分析程序,同时采用DataSocket技术进行网络通信。设计出了基于LABVIEW的电能质量在线监测和分析系统,该系统提高了在线监测的灵活性和参数的精度并能及时记录相关的电压事件,能够长时间稳定工作,具有一定的实用价值。     

车辆TPMS轮速传感器误差消除方法研究

轮胎压力监测系统能够实时地自动监测行驶中汽车的轮胎气压,对于提高行车安全具有重要的意义。基于轮胎压力监测系统硬件平台,阐述了轮速信号的获取,研究了异点剔除方法,提出了基于弹性BP神经网络分析轮速传感器误差的方法,实现了对轮速信号的修正。仿真和实验结果表明,该轮速传感器误差消除方法的精度可达2×10-4rad,能够显著降低传感器误差,提高轮速信号的获取精度。     

理工类高等院校实验室安全管理体系建设研究

实验室安全管理是理工类高等院校安全工作的重点内容．针对理工类高校实验室安全管理问题。对理工类高校实验室安全管理的特点和影响实验室安全管理的主要因素进行详细的研究和分析,并以此为基础从实验室安全管理组织体系、监督体系和保障体系三个方面提出建设理工类高等院校实验室安全管理体系的具体措施。