INTEGRATING ALBEMARLE RESOLVE DESULFURIZATION TECHNOLOGY WITH NOVEL PETRO-CANADA PROCESS CONCEPTS IN COMMERCIAL FCCU OPERATIONS

The gasoline and distillate sulfur regulations promulgated throughout the world to reduce tail-pipe emissions are now strongly impacting refinery operations and investments. FCC gasoline is recognized as the principal contributor of sulfur to the gasoline pool and has become the focus for meeting the new specifications. The difficulty in removing sterically hindered sulfur species in the fluid catalytic cracking unit (FCCU) cycle oil drives up the hydrogen and investment costs for treating the distillates. Although installation of pre- and post-treatment facilities is planned by many refiners, other non-capital approaches such as undercutting are being evaluated to meet interim and future sulfur levels. Even when expensive treatment facilities are installed, operating costs can be lowered and the flexibility of the facility increased with improvements in the ability to remove sulfur in the FCCU. In this article, we detail Petro-Canada's experience in integrating Albemarle's RESOLVE sulfur reduction technology with a combination of innovative process ideas. These concepts include heavy naphtha recycle, coprocessing of hydrogen donor feeds, and recycle of light cycle oil (LCO) to a specially designed stripper reactor. Special attention is paid to the interaction of deep FCC feed hydrodesulfurization with the FCC performance. The results demonstrate that very low FCC gasoline sulfur levels can be achieved without significant capital investment through novel approaches to recycle, creative integration of cat feed hydrotreating unit (CFHTU)-FCCU designs and operations, and application of state-of-the-art sulfur reduction additive technology. An added benefit of the RESOLVE 950 sulfur reduction technology is the substantial elimination of sulfur oxides in the FCC flue gas. This has been observed in Petro-Canada operations and numerous other RESOLVE 950 applications around the world.     

Three-dimensional modelling of Non-Newtonian fluid flow in a coat-hanger die

The three-dimensional model of isothermal flow of power-law fluid in a coat-hanger die has been developed using finite element method. The shape of coat-hanger die used in the present model was determined according to the previous analytical design equation which is based on one-dimensional flow model in the manifold and the slot. Because uniform flow rate across the die outlet is most important to achieve uniform thickness of extruded polymer sheet or film, flow rate distribution is mainly examined to determine the valid process condition for the design equation as the design parameters are changed. The effects of fluid property in terms of power-law index and process parameters not considered in one-dimensional design equation such as die inlet size and the presence of land were analyzed. Results show that the manifold angle is the most influencing design parameter on flow rate distribution. When the material of different power-law index from design value is processed, the change of power-law index affects the uniformity of flow rate appreciably.     

DAMPED OSCILLATIONS IN A BINGHAM PLASTIC FLUID

Stokes' second problem, the propagation and damping of waves into a semi-infinite fluid generated by harmonic oscillations of a flat pate on the surface, is solved for the simple Bingham Theological constitutive model. The solution reveals the existence of “windows” in the distance-time-stress space in which shearing is possible whereas outside these restricted regions no shearing can occur. Within these restricted regions the wave forms developed are exponentially damped, traveling waves which propagate from the excitation plane into the fluid and disappear along definitely prescribed boundaries determined by the yield condition. The most significant consequence of the existence of these “windows” of shear is that even very small yield stresses will radically modify the induced velocity wave patterns from that which would be expected based upon the classical Newtonian fluid solution of Stokes' second problem. At least in this physical setting, it is not necessary for shear to occur globally for motion to occur anywhere, as has been postulated in some recent studies of complex motions. Thus, the motion is consistent with a simple Bingham model which does possess a yield stress.     

Transition of the flow in a symmetric channel with periodically expanded grooves

Transition of the flow in a periodically grooved channel is numerically investigated for periodicity indices m=1 up to 6 by assuming the two-dimensional and fully developed flow field, where m is defined as a number of grooves in which the flow repeats periodically. Critical Reynolds numbers for the onset of a self-sustained oscillatory flow from a steady-state flow are evaluated by numerical simulations. It is found that the bifurcations occur at the critical Reynolds numbers as a result of Hopf bifurcation, and a period in the streamwise direction of the oscillatory flow is twice as long as the groove pitch of the channel. In addition, flow visualization with the aluminum dust method is carried out to confirm the results obtained from the numerical simulations. The experimental results are in good agreement with the numerical ones.     

A NOTE ON THE REDUCED EFFICIENCY OF THE INDUSTRIAL CYCLONE

In this paper a theoretical investigation into the basis of the reduced efficiency of a conical cyclone is performed. By considering the flow in a region where viscosity is unimportant an analytical solution to the problem is obtained. From this model the performance of the cyclone is evaluated and this can be expressed in terms of three operating and design parameters. One of these parameters is the split ratio, that is the proportion of the volume of fluid entering the cyclone which goes to the underflow. It is demonstrated mathematically that the empirical formula for the reduced efficiency at present in common use is a very good absolute measure of the separating ability of a cyclone.     

不锈钢焊管抛磨新设备

PG圆管和PF方管系列抛光机的抛光质量及效率能满足生产需要。介绍了这种不锈钢圆管及方管抛光机的工作原理。着重分析了抛磨轮的选用。     

THREE-DIMENSIONAL NUMERICAL SIMULATION OF AERATED FLOWS DOWNSTREAM SUDDEN FALL AERATOR EXPANSION-IN A TUNNEL

Air entrainment is known to be one of efficient and inexpensive methods to prevent cavitation damages in hydropower projects.The shape of sudden expansion-fall is used as a common device for mitigating cavitation erosions.The complex flow patterns with cavitation are numerically simulated by using the realizable k-εturbulence model and the air-water mixture model.The calculated results are compared well with the experimental results as well as those obtained with the k-εturbulence model with the Volume Of Fluid(VOF)Model.The calculated results agree well with the experimental data for the aeration cavity and wall pressure.Moreover,the air concentration near sidewall is simulated by a mixture model.It is found that the mixture turbulence model is superior to the VOF turbulence model.     

基于Visual Basic的铺排船液压监控系统的设计与实现

分析铺排船液压系统的特点。基于Visual Basic开发了上位机监控系统,将液压系统的工作状态实时呈现在上位机上,对该软件的程序设计做了说明。该监控系统对于提高铺排作业效率,提升系统的稳定性有重要意义。     

高职计算机专业学生评价体系的探索

在德国职业教育的影响下,高职计算机专业教育开始推行任务驱动,工作过程导向的教育模式,但是其教育评价体系还没有与教学模式相统一,实现与对应就业岗位需求的完美结合。高职计算机专业教育评价体系包含了很多方面,本文主要从学生学习效果的评价体系进行探索。