Water and salt permeability of reinforcement polymer‐gel composite membrane

The charged mosaic polymer membrane (CMM) without reinforcement and the composite charged mosaic polymer membrane (CCMM) with reinforcement were investigated in terms of salt and water transport (permeability). The composite charged mosaic polymer membrane (CCMM) with reinforcement showed a unique transport behavior such as preferential material transport L_p and ω. Water permeability coefficient, L_p and salt permeability coefficient, ω were estimated by taking account of active layer thickness of composite polymer gel. The L_p and ω values of CCMM with reinforcement were larger than those of CMM without reinforcement. On the other hand, the reflection coefficient of CCMM, σ, showed negative value, which suggested preferential material transport to solvent transport. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Li+ ions on structure,properties, and actuation of cellulose electro‐active paper actuator

We have reported an electro‐active paper actuator from regenerated cellulose. After dissolving cellulose fibers with a solution of lithium chloride in N,N‐dimethylacetamide, cellulose was regenerated by combining distillation of cellulose solution along with washing with the mixture of deionized water, isopropyl alcohol, and running water. However, the effect of Li⁺ ions on structure, properties, and the actuation behavior of the actuator was not studied. This article describes the changes in these parameters when the Li⁺ ions are removed by subjecting it to different running water exposure time. The structure and properties of cellulose electro‐active paper and its actuation behavior were studied. As Li⁺ ions content reduced from 4354.17 to 10.26 ppm by increasing the exposure time of running water, crystallinity, Young's modulus, and bending displacement decreased. Details about the investigation have been explained. This elimination of ions is important to increase the piezoelectric effect in EAPap by decreasing the ion migration effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

一种自动冲水控制装置的开发和应用

介绍光电被动感应控制开关模块工作原理，研究开发了一种基于被动感应控制原理的自动冲水控制装置，总结比较了主动感应控制与被动感应控制的优缺点及其应用特点。     

整体毡纤维体积分数对CVD增密的影响

将3组不同纤维体积分数的整体毡采用等温CVD进行沉积热解炭增密,结合CVD沉积过程中整体毡内气体传质数学模型,研究了整体毡的纤维体积分数对CVD增密过程的影响,研究结果表明:纤维体积低的整体毡沉积时增重率高;纤维体积分数高的整体毡容易获得较高密度的C/C复合材料;纤维体积分数超过35％的整体毡经过300 h的化学气相沉积,坯体的体积密度能达到1.52 g/cm~3。     

电流变体特性及电流变体应用器件的进展

本文详细评述了电流变体(ERF)材料的组成、工作机理及其流变力学性能,提出以Bingham塑性体来近似描述电流变体的流变特性,综述了电流变体在智能材料、汽车离合器、液压阀门等器件中的应用,给出了含电流变体的双层智能复合材料梁单层、双层加电状态对其振动特性的影响,设计了含电流变体的主动控制式减振器,并对其在外加电场作用下的减振性能进行了评价。     

Fischer-Tropsch synthesis on Fe-Mn ultrafine catalysts

The Fischer-Tropsch (FT) synthesis on Fe-Mn ultrafine catalysts prepared by a special degradation method of Fe-Mn complexes is presented. The effects of preparation method and Mn content on the FT performance are examined and the active phases and the role of Mn are elucidated.     

Artificial Neural Network Modeling of Osmotic Dehydration Mass Transfer Kinetics of Fruits

Artificial neural network (ANN) models were developed for the prediction of transient moisture loss (ML) and solid gain (SG) in osmotic dehydration of fruits using process kinetics data from the literature. ANN models for ML and SG were developed based on data over a broad range of operating conditions and ten common processing variables: temperature and concentration of osmotic solution, immersion time, initial water and solid content of the fruit, porosity, surface area, characteristic length, solution-to-fruit mass ratio, and agitation level. The trained models were able to accurately predict the outputs with associated regression coefficients (r) of 0.96 and 0.93, respectively, for ML and SG. These ANN models performed much better than those obtained from linear multivariate regression analysis. The large number of process variables and their wide ranges considered along with their easy implementation in a spreadsheet make them very useful and practical for process design and control.     

Miniaturization and bandwidth enhancement of a cavity backed circular microstrip patch antenna

The resonant frequency of a circular patch antenna with and without circular cavity is measured. The patch miniaturization in the presence of the cavity is proved. Different methods of reducing resonant frequencies and broadening bandwidth without significantly reducing antenna gain are presented. Capacitively loaded patch and slits on the patch stimulate the patch at lower frequencies and multiple resonances, thus help miniaturization. Finally ferrite loading on the feed probe further increases the bandwidth without significantly reducing the antenna gain. The method is much more improved than that for a resistive loaded patch and a deformed patch. © 2007 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2007.     

An efficient controller structure with minimum roundoff noise gain

Based on a polynomial operator approach, a new sparse controller structure is derived, which is actually an improved version of the recently proposed structure [Li, G. (2004). A polynomial-operator-based DFIIt structure for IIR filters. IEEE Transactions on Circuits and Systems II, 51, 147-151]. The performance of the proposed structure is analyzed by deriving the corresponding expression of roundoff noise gain and the problem of finding optimized sparse structures is solved efficiently with a genetic algorithm (GA). A numerical example is given, which shows that the newly developed structure can achieve much better performance than some well-known structures and particularly outperforms the traditional optimal fully parametrized realization greatly in terms of reducing roundoff noise and implementation complexity.     

有源滤波器非线性行为分析及其电磁干扰的抑制

对具有结构不稳定性的有源滤波器的非线性问题进行了研究，通过对绝缘栅双极型晶体管（IGBT）器件开关过程产生的瞬态电流脉冲的传播过程进行分析，将IGBT器件的控制电压引起的结构稳定问题的抑制转化为该瞬态电流脉冲传播通路的阻断。利用仿真和实验对正激式与反激式开关变换器进行抗干扰能力的研究，说明反激式开关变换器用于有源电力滤波器(APF)的辅助开关电源，更有利于APF对非线性问题的抑制。