A theory for the formation of tetrahedral amorphous carbon including deposition rate effects

A theoretical model is presented to describe the effect of ion beam bombardment rate on the formation of tetrahedral amorphous carbon (ta-C) films. The critical ion energy, E_c, corresponding to a 50% sp³ content in the films, is found to be dependent on both the effective thermal resistance and the ion beam bombardment rate. In the model, the ‘window’ width in the ion energy scale for the formation of ta-C material increases with decreasing deposition rate and with a reduction in the effective thermal resistance, until limited by lower and upper boundary thresholds. Experimental data are reproduced by the model. The plasmon energy, which correlates with sp³ fraction, is found experimentally of be higher for lower deposition rate and smaller effective thermal resistance. Data points for high sp³ content ta-C films deposited on silicon substrates at room temperature occupy a region in the ion energy-deposition rate (E-r) diagram similar to that predicated from the theory.     

Growth structure investigation of MgF2 and NdF3 films grown by molecular beam deposition on CaF2(111) substrates

The growth structure of MgF₂ and NdF₃ films grown on polished CaF₂(111) substrates deposited by molecular beam deposition has been investigated using transmission electron microscopy (TEM) of microfractographical and surface replications as well as cross-sectional TEM, atomic force microscopy, packing density, and absorption measurements. It has been shown that by taking advantage of ultrahigh vacuum environments and a special stratification property of MgF₂ and NdF₃ films, the preparation of nanocrystalline films of high packing density and low optical absorption is possible at a substrate temperature of 425 K.     

脱苯工艺的节能改造

焦化厂富油脱苯工艺中，管式炉法较蒸汽法节能。本溪钢铁公司焦化厂产焦１８０万ｔ／ａ的装置，其富油脱苯工艺由蒸汽法改为管式炉法后，每年可节煤７０００ｔ。     

雁翎油田注氮气提高采收率工艺技术

在现有的提高采收率方法中,注气驱是应用较广、效果较好的方法,特别是注氮气驱由于其气源广泛、价廉经济、无腐蚀性,以及要求的油藏地质结构特征和原油的物理性质等因素的变化范围广泛等特产,这种提高采收率的方法应用的最为普及,代表了目前提高采收率的发展方向。结合雁翎油田实例,简要介绍了注氮气提高采收率的机理、注气井组建设、制氮工艺及注气后的采油完井方式、方法。     

用业务流程再造思想设计采购业务流程

业务流程再造的核心思想是对企业的组织结构和工作方法进行“彻底地、根本性”重新设计,它对于打造企业核心竞争力具有重要的战略意义。本文结合株洲齿轮有限责任公司的实际,对企业采购业务流程的现状、思路和具体做法进行了分析研究。     

丁烷脱沥青装置掺炼油浆工艺

由于新疆原油的渣油中重金属含量高，结构组成复杂，直接进入催化裂化装置做原料时，催化剂重金属污染严重，产品分布差，渣油掺炼量低。而且，丁烷脱沥青过程所得到的脱油沥青软化点高、针入度低、延伸度差。为了提供优质的催化裂化原料和优质的道路沥青原料，进行了丁烷脱沥青装置掺炼油浆组合工艺的开发和应用，取得了较好的效果，脱沥青油收率提高，提供了更多重金属含量低的催化裂化原料，沥青性能得到改善。     

先进的现场供气设备--TCN640制氮机

对安装于深圳赛意法微电子有限公司的TCN640制氮机进行了简介。该设备由Air Liquide Japan Ltd．(日本液空公司)总体设计、制造，国内技术人员消化改进工艺，具有设备配置先进，安装简单，安全高效，能耗低等优点，其产品氮气的纯度已超过了高纯氮的技术指标。     

核壳型铁钴纳米复合材料的制备及其性能

采用多元醇还原工艺和自组装技术,在微米级Fe粉表面包覆纳米Co粒子,一步法制备了一种具有核壳结构的复合磁性微球,用SEM表征了其相组成和形貌,用VSM测试了磁滞回线,初步研究了磁学性能。结果表明:用该法制备的核壳型Fe/Co纳米复合材料表面包覆致密,其比饱和磁化强度和矫顽力介于微米铁粉和纳米钴粉之间。     

Calendar maintenance of arbitrarily structured systems

A semi-Markov model is constructed that describes an arbitrarily structured multicomponent technological system and takes into account its calendar maintenance. Using an aggregation algorithm, approximate values of stationary reliability characteristics and an optimal term of maintenance work are determined for the system. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 2, pp. 69–86, March–April 2006.     

Wear resistance of plasma coatings for a constant work of friction

We analyze the wear resistance of plasma coatings for a constant work of friction. The dependences of the wear resistance of the coatings are obtained for a broad range of loading conditions. It is shown that the minimum sensitivity to loading conditions is exhibited by the molybdenum coatings. It is also established that the wear resistance of the coatings decreases as the amplitude of displacements increases and the cyclic frequency of the tests decreases due to the intensification of fatigue processes on the surfaces. The comparative characteristics of coatings are presented. __________ Translated from Problemy Prochnosti, No. 5, pp. 94–100, September–October, 2007.