Vibrations of stretched damped beams under non-ideal boundary conditions

A simply supported damped Euler-Bernoulli beam with immovable end conditions are considered. The concept of non-ideal boundary conditions is applied to the beam problem. In accordance, the boundaries are assumed to allow small deflections and moments. Approximate analytical solution of the problem is found using the method of multiple scales, a perturbation technique.     

Surface chemistry of tribochemical reactions explored in ultrahigh vacuum conditions

The thermal decomposition of model extreme-pressure lubricant additives on clean iron was studied in ultrahigh vacuum conditions using molecular beam strategies. Methylene chloride and chloroform react to deposit a solid film consisting of FeCl₂ and carbon, and evolve only hydrogen into the gas phase. No gas-phase products and less carbon on the surface are detected in the case of carbon tetrachloride. Dimethyl and diethyl disulfide react on clean iron to deposit a saturated sulfur plus carbon layer at low temperatures (∼600 K) and an iron sulfide film onto a Fe + C underlayer at higher temperatures (∼950 K). Methane is the only gas-phase product when dimethyl disulfide reacts with iron. Ethylene and hydrogen are detected when diethyl disulfide is used.     

步进梁式炉的运动研究

对国内引进的、用于粉末冶金的步进梁式炉的运动,以图解法和解析法进行了分析,并对运动参数进行了理论推导和计算。本研究结果,对解决步进粱式炉的运动故障以及进行新型设计提供了有效的理论分析和计算依据。     

基于偏振光干涉仪的Interleaver解复用器实验研究

为实现更窄信道间隔的密集波分复用 ,提出了一种基于偏振光干涉仪的新型Interleaver解复用器 ,分析了结构组成与基本工作原理 ,对其进行了初步的测试实验 ,该器件所分开的DWDM系统两组波长功率均衡 ,隔离度分别为 1 0 6dB和 1 4 6 4dB ,- 1dB带宽分别为 0 7nm和 0 4nm。     

钢筋混凝土框架梁截面的优化确定

以梁的配筋和截面有效高度为优化设计变量 ,导出了 RC框架梁的优化配筋率和优化设计高度 ,并给出了各种荷载作用下 ,不同设防烈度和场地类别条件下的截面优化设计高度表达式 ,为设计人员提供了方便 .     

Cover Picture: Programmable Motion and Separation of Single Magnetic Particles on Patterned Magnetic Surfaces (Adv. Mater. 14/2005)

Structured magnetic surfaces enabling programmable motion of single micrometer‐sized magnetic particles are reported on p. 1730 by Gunnarsson and co‐workers. Patterns of thin‐film magnetic elements are tailored to form transport lines with junctions for the separation of individual particles. This method has the potential to improve and generate new applications in biotechnology. The cover shows a schematic of the transportation and separation of magnetic particles functionalized with antibodies capable of selectively capturing the corresponding analytes from a sample.     

T梁预制中需要注意的问题

为确保在T梁预制时 ,其内、外的质量和安全施工 ,介绍了四个需特别注意的问题。指出在T梁预制时 ,应把质量放在首位 ,进行具体、综合的分析和计算     

P–I diagram method for combined failure modes of rigid-plastic beams

Closed-form solutions of pressure-impulse (P–I) diagrams for simply supported and fully clamped rigid-plastic beams subjected to impact load are developed. Two failure categories, i.e., bending failure and shear failure, are considered and the responses of the beams are analyzed based on five transverse velocity profiles. With proper failure criteria, the critical P–I equations for bending and shear failure are derived. After the simplification of the critical P–I equations, the influences of the shear-to-bending strength ratio and the boundary conditions on the P–I diagrams are discussed. The results are compared with those based on a single-degree-of-freedom (SDOF) model. It is shown that the proposed P–I diagram method can be conveniently applied to assess beam damage extents and damage patterns. Especially, the P–I diagrams have good agreement with those based on an elastic, perfectly plastic model when severe damage occurs.     

带吊车门式刚架轻型钢结构厂房的设计与分析

以实际工程为背景，采用门式刚架轻型房屋钢结构设计规程，对带吊车门式刚架、吊车梁、抗风柱及基础的受力特点、设计方法进行分析，解决了设计中所遇到的问题。