大宗物料激光精密盘库技术开发利用

大宗物料是指大型料场堆放的矿石、煤、球团矿等原料,因其堆积形状复杂、料场巨大等原因很难精确测量其体积。开发大宗物料激光精密盘库技术,总结实际盘库经验,着重对盘库的各项关键技术进行研究和探讨。     

精轧机出口带钢头部浪形分析及应对措施

针对精轧机组出口板坯头部浪形不达标的问题,采用实测轧机弹跳曲线的方法找出了轧机的机械推上系统间隙无法有效消除是产生浪形不达标的主要原因。根据实际情况提出改造方案,结果表明其有效性。     

120t转炉区双炉双机生产实践

本文主要总结西林钢铁集团有限公司炼钢总厂转炉工序双炉座与双连铸机在生产实践中出现的一些问题以及采取的改进措施,并提出了今后努力的方向。     

阿钢高炉炸瘤实践

阿钢1号高炉炉况长期不顺,实施炸瘤后炉况转顺。本文阐述了炸瘤前后的操作过程。     

低排放燃烧室空气雾化喷嘴射流破碎特性研究

针对当前广泛应用于低排放燃气轮机燃烧室中的空气雾化喷嘴,采用大涡模拟（Large Eddy Simulation,LES）和流体体积法（Volume of Fluid,VOF）研究了其在流动模糊（Flow Blurring,FB）和流动聚焦（Flow Focusing,FF）模式下射流一次破碎过程的差异。结果表明：两种模式的射流一次破碎过程均可分为3个阶段,气液交界面波动阶段、射流发展阶段和射流破碎阶段;喷嘴内部回流区的演变决定了气液交界面的波动程度,流动模糊模式下射流在后两个阶段的径向速度和形态变化程度均远高于流动聚焦模式,气泡回流过程在其射流破碎阶段占据主导地位,液体管道内气泡分布位置与涡的强度呈正相关。     

燃气轮机气动执行器故障及解决

解决了镇海联合循环电厂PG9171E型燃气轮机启动时因气动执行器前减压阀故障而威胁燃机的运行和安全生产的问题,介绍相关的故障诊断方法及经验.     

基于MATLAB的单相桥式整流电路研究

本文在对单相桥式半控擎流电路和单卡日桥式全控整流电路进行理论分忻的基础上,建立上基于MATLAB／Simulink的单相桥式整流电路的仿真模型,并对其带纯电阻负载及电阻电感性负载时的工作情况进行对比分析与研究。用MATLAB软件自带的Power System工具箱进行仿真,给出了仿真结果,验证,本文所建模型的正确性。     

Low‐Energy Electron Beam Induced Charging and Secondary Electron Emission Properties of FEP Film Used on Satellite Surfaces

Many kinds of insulating materials are used outside a spacecraft. They include FEP films, polyimide films, and so on, and are used as thermal control materials. These materials are exposed to a charged‐particle environment around the spacecraft. Thus then become charged due to charged particles, especially electrons. It has been pointed out that charging of these materials is likely to cause discharges on the surfaces. From this viewpoint, we investigated the charging potential characteristics of 127‐μm‐thick FEP film, a typical thermal control material, by exposing it to electron irradiation at various energies below 20 keV. In the dependence of the charging potential on the electron energy, we found that the electron energy at which no charge‐up occurs is about 2.7 keV. This appears to be the energy at the which secondary electron emission yield becomes unity. This indicates that electron irradiation of FEP film with energies lower than 2.7 keV induces positive charging. From the charge decay characteristics after electron irradiation, the volume resistivity of the film was also obtained as a function of the electric fields in the bulk of the FEP film.