钢板侵彻过载的三维数值模拟

利用LS—DYNA有限元程序，用弹塑性模型建立材料模型，对高速弹丸侵彻均质钢板问题进行了数值模拟，并与测试结果进行了比较，说明了有限元分析的有效性，为引信设计提供参考。     

提高钢水质量减少铸件气孔

通过规范冶炼的操作，加强冶炼过程控制，细化分解技术指标，制定奖励方案，提高了钢水质量，解决了铰链梁铸件的气孔问题。     

Optimal control and operation of drum granulation processes

Process optimisation and optimal control of batch and continuous drum granulation processes are studied in this paper. The main focus of the current research has been: (i) construction of optimisation and control relevant, population balance models through the incorporation of moisture content, drum rotation rate and bed depth into the coalescence kernels; (ii) investigation of optimal operational conditions using constrained optimisation techniques; (iii) development of optimal control algorithms based on discretized population balance equations; and (iv) comprehensive simulation studies on optimal control of both batch and continuous granulation processes. The objective of steady state optimisation is to minimise the recycle rate with minimum cost for continuous processes. It has been identified that the drum rotation-rate, bed depth (material charge), and moisture content of solids are practical decision (design) parameters for system optimisation. The objective for the optimal control of batch granulation processes is to maximize the mass of product-sized particles with minimum time and binder consumption. The objective for the optimal control of the continuous process is to drive the process from one steady state to another in a minimum time with minimum binder consumption, which is also known as the state-driving problem. It has been known for some time that the binder spray-rate is the most effective control (manipulative) variable. Although other possible manipulative variables, such as feed flow-rate and additional powder flow-rate have been investigated in the complete research project, only the single input problem with the binder spray rate as the manipulative variable is addressed in the paper to demonstrate the methodology. It can be shown from simulation results that the proposed models are suitable for control and optimisation studies, and the optimisation algorithms connected with either steady state or dynamic models are successful for the determination of optimal operational conditions and dynamic trajectories with good convergence properties.     

浅谈城市集中供热工程造价的控制

就城市集中供热工程造价的控制问题，从对设计阶段的成本、施工过程，加强材料成本、工程结算的控制几方面对其进行了详细的阐述，最后对工料分析与检查方面进行了论述，以提高供热企业的投资效益。     

Morphology control of titanium oxides by tetramethylammonium cations in hydrothermal conditions

The effect of tetramethylammonium cations (TMA⁺) on TiO₂ crystal morphology in hydrothermal conditions has been studied. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) methods. The morphologies including besom-like particle, nanosheet and nanotube have been observed. The different ways TMA⁺ cations in the hydrothermal bases affect the crystal growth manner are suggested to be responsible for the different morphologies of the as-synthesized samples.     

Lifetime control in silicon power P-i-N diode by ion irradiation: Suppression of undesired leakage

The irradiation with high-energy (7.35 MeV) protons through a set of energy degraders was used to suppress leakage of the silicon power diodes subjected to local lifetime control. The aim was to modify the profile of recombination centers and to reduce production of vacancy complexes. The high-energy proton irradiation was compared with standard local lifetime killing by high-energy alphas. Recombination centers arising from irradiation were characterized after irradiation and subsequent annealing at 220 and 350 °C by deep level transient spectroscopy and I-V profiling. Static and dynamic parameters of irradiated diodes were also measured and compared. Results show that the applied irradiation with protons provides 3-10 times lower leakage compared to standard alphas for equivalent reduction of the reverse recovery current maximum. On the other hand, the excessive formation of hydrogen donors at high proton fluences and their diffusion during annealing at 350° decreases diode blocking capability.     

High accuracy path tracking for vehicles in presence of sliding: Application to farm vehicle automatic guidance for agricultural tasks

When designing an accurate automated guidance system for vehicles, a major problem is sliding and pseudo-sliding effects. This is especially the case in agricultural applications, where five-centimetre accuracy with respect to the desired trajectory is required, although the vehicles are moving on slippery ground. It has been established that RTK GPS was a very suitable sensor to achieve automated guidance with such high precision: several control laws have been designed for vehicles equipped with this sensor, and provide the expected guidance accuracy as long as the vehicles do not slide. In previous work, further control developments have been proposed to take sliding into account: guidance accuracy in slippery environments has been shown to be preserved, except transiently at the beginning/end of curves. In this paper, the design of this control law is first recalled and discussed. A Model Predictive Control method is then applied in order to preserve accuracy of guidance even during these curvature transitions. Finally, the overall control scheme is implemented, and improvements with respect to previous guidance laws are demonstrated through full-scale experiments.     

Quality control of chip manufacture and chip analysis using epoxy-chips as a model

Biochips are miniaturized, highly ordered analysis systems which offer the unique advantage of highly parallel analysis of thousands of analytes at the same time. Although this technique has been enthusiastically developed and has promised to improve and speed up numerous biological assays, the quality control of chip manufacture, chip analysis and data management has received less attention.

The following article compares three epoxy-containing chip surfaces (ARChip Epoxy, 3D-Link™, and EasySpot) with respect to their autofluorescence, immobilization capacity, background fluorescence and hybridization efficiency. Since data collected from biochip experiments are random snapshots with errors, inherently noisy and incomplete, we tried to evaluate technical factors causing variability and to set up quality control procedures for chip manufacture and chip analysis. Variabilities caused by arraying, glass substrate and polymer coating, fluorescent label and experimental conditions are discussed in details.     

基于概念网络的文本信息监控技术

由于网上信息的迅速增长,文本信息监控已经成为网上信息管理中的热点研究课题。本文在模糊集和语义网络的理论基础上,构建了模糊值动态约束性概念网络,介绍了该概念网络的基本构建方法,并提出了基于概念网络的文本分析算法。     

基于GMS97C2051的串行多路温度数据采集系统的设计

介绍了一种以GMS97C2051单片机为核心、利用新型集成化智能温度数字传感器DS1621实现的多路温度数据采集系统,利用MAX3232完成电平转换并将采集到的数据通过串行接口传送给上位机,在上位机中实现显示、控制等功能.叙述了DS1621的特性及工作方式,给出了硬件电路原理和软件流程,以及系统与上位机通信程序源代码.该系统实现了现场多点温度数据的采集,明显提高了检测可靠性和检测效率.现场实验证明该系统在测试过程中工作稳定,满足设计要求.