聚酯厂钛复合钢板制氧化反应器的检验和鉴定

叙述了聚脂厂的氧化反应器在爆炸事故中由于高温高压对器壁复层（钛）造成的损伤和采取的相应修复措施及鉴定意见。     

High Temperature Oxidation of FGH96 P/M Superalloy

High temperature oxidation behaviors of FGH96 P/M superalloy have been studied in air at temperatures ranging from 600 to 1000℃. By means of isothermal oxidation testing,X-ray diffraction,SEM(scanning electron microscopy),and EDS(energy dispersive X-ray spectroscopy) analyses,the oxidation kinetics as well as the composition and morphology of scales were investigated. Thermodynamic calculations were used to explain the oxidation mechanism. The results showed that as the oxidation temperature increased,the oxidation rate,the scale thickness,and scale spallation increased. FGH96 P/M superalloy exhibits good oxidation resistance at temperature below 800℃. The oxidation kinetics follows an approximately parabolic rate law,and the oxide layer was mainly composed of Cr2O3,TiO2,and a little amount of NiCr2O4. The oxidation is controlled by the transmission of chromium,titanium,and oxygen through the oxide scale.     

乙炔法合成氯乙烯转化器的动态仿真

研究乙炔法合成氯乙烯转化器的动态仿真技术,以分析氯乙烯转化器的特征,建立动态机理模型,针对模型的形式和特点,采用适当的数值计算方法,开发氯乙烯转化器的动态仿真程序模块。仿真计算表明,当达到稳态时其结果跟生产数据较为吻合,动态过程跟生产的变化趋势相一致。模型对优化操作有一定的指导意义,对顺利开发整个氯乙烯合成工艺的仿真系统软件,也有重要价值。     

Novel Tumor-Targeting Nanoparticles for Cancer Treatment—A Review

Being one of the leading causes of death and disability worldwide, cancer represents an ongoing interdisciplinary challenge for the scientific community. As currently used treatments may face limitations in terms of both efficiency and adverse effects, continuous research has been directed towards overcoming existing challenges and finding safer specific alternatives. In particular, increasing interest has been gathered around integrating nanotechnology in cancer management and subsequentially developing various tumor-targeting nanoparticles for cancer applications. In this respect, the present paper briefly describes the most used cancer treatments in clinical practice to set a reference framework for recent research findings, further focusing on the novel developments in the field. More specifically, this review elaborates on the top recent studies concerning various nanomaterials (i.e., carbon-based, metal-based, liposomes, cubosomes, lipid-based, polymer-based, micelles, virus-based, exosomes, and cell membrane-coated nanomaterials) that show promising potential in different cancer applications.     

A fault analysis of DC electric arc furnaces with SVC harmonic filters in a mini-mill plant

This paper proposes the most feasible solution to overcome the failure of the 2nd harmonic filter in the static VAR compensator (SVC) which operates with the DC electric arc furnace (EAF) at Gwangyang Steel Mill in Korea. In order to investigate the causes of this failure, various measurements were carried out on the DC EAF and the main transformer at the PCC (point of common connection). It was concluded that the two causes for the failure are; the inrush current in the main transformer, and the parallel resonance between the system impedance and the harmonic filter. Three solutions to suppress the transformer inrush current and another three solutions to avoid the parallel resonance are suggested. The feasibility of these solutions was verified through the computer simulation with PSCAD/EMTDC. The most feasible solution to avoid further failures of the 2nd harmonic filter was selected, based on the estimated result for the six optional solutions in the point of performance and cost.     

醋酸乙烯新型合成反应器结构开发研究

通过单管侧流试验和冷模试验,研究影响反应产物质量的反应器主要设计参数、操作参数和列管间流体流动状况,确定新型反应器结构,并通过工业化试验来验证改进效果。     

61m高砖砌烟囱定向控制爆破拆除

根据烟囱周围环境和自身结构特点,通过选择合适的切口形式、设计合理的爆破参数及采取适当的预处理和安全技术措施,获得了良好的爆破效果。采用照相及摄像技术对烟囱的倒塌过程进行了观测,对结果进行分析后获得了其倒塌过程的规律:烟囱起爆后6000 ms内,相对高度下降很慢,占初始相对高度的4.39%;在6000ms以后,烟囱倒塌倾角迅速加大,总体上呈现边下坐边倒塌且先慢后快的特点。     

浆态床合成气制二甲醚反应器数学模拟

建立了包括液相返混和催化剂颗粒沉降的合成气一步法制二甲醚浆态床反应器的数学模型,模拟计算了空速、原料气组成、反应温度、反应压力等反应条件对反应的影响。计算结果表明,CO转化率和二甲醚的选择性随温度增加、压力增大而提高,在一定温度、压力条件下,CO转化率随空速增大而减小,合成气含有一定量的CO2有利于CO转化率增加。     

基于模糊自适应PI控制的有源电力滤波器仿真

有源电力滤波器(APF)的控制方法是影响有源电力滤波器补偿性能的关键因素,同时也影响其应用的范围。本文提出了一种更为先进、更能能体现有源电力滤波器非线性控制特点的控制策略—模糊自适应PI控制,并利用Matlab软件对该控制策略的可行性进行了仿真。     

基于单片机控制的异步电机磁控软起动系统的设计

分析了磁控电抗器的电路结构和工作原理,介绍了磁控软起动系统,给出了以80C196KC为主控单元的硬件电路图。软件设计方面给出了主程序流程图及子程序流程图,并对磁控软起动过程进行了仿真研究。