粘弹性圆柱壳在轴向恒压下的动力稳定性

基于Timoshenko-Mindlin假设,得到考虑粘弹性的各向同性圆柱壳及纤维增强正交铺设层合圆柱壳在轴向恒压下的动力学方程。文中对两端简支的圆柱壳进行了分析,依Laplace变换,导出动力稳定的特征方程,由Routh-Hurwitz判据建立动力稳定性条件,对两类圆柱壳讨论了横向剪切变形的影响。     

EXPERIMENTAL RESEARCH ON RADIATION FROM DOUBLE CYLINDRICAL STRUCTURES

1. INTRODUCTION Induced by unbalanced mechanical forces and moments, underwater structures vibrate and radiate The main form of underwater structures, such a submarine, is reinforced double cylindrical structure immersed in water, with fluid media filled between th double cylindrical shells. In essence, this is a coupling problem between fluid and structure. Multipl methods have been used to estimate radiation leve from underwater structures[1-9]. Musha[10] and Chertock[11] estimate the …     

Study on the Intelligent System of Gear Pitch Deviation Measurement and Analysis

The intelligent controlling and data process of pitch error measurement is proposed. The whole system takes C++ as the development tool and takes advantages of object-oriented and visualization, having the advantages of easy operation and humanistic interface. In the meanwhile, the system can be complemented and improved according to the demand of user, having certain independence. The research of the system provides an efficient and reliable way to measure and analyze the gear pitch, which can be referenced in the future research.     

机构设计在大型柱面网壳结构施工中的应用

 将机械行业中的机构运动概念应用到大型柱面网壳结构的施工，提出一种“折叠展开式”整体提升施工技
术． 详细阐述了该项施工方法的基本思想，并推导机构运动过程的运动学和动力学公式． 通过一个工程算例的分
析，总结机构运动和动力特性．计算结果证明机构运动过程中产生的动力效应不明显，处于“折叠”状态的网壳能够
承受施工荷载．该项新技术在亚洲最大跨度的柱面网壳结构的施工中得到了成功应用，证明了它的实用性和优越性．     

起落架落震试验飞机机轮三向冲击位移的动态测量

为了研究飞机起落架受冲击载荷时的功量吸收状况，须在起落架落震试验中，对飞机着陆瞬间起落架机轮在空间三个方向上冲击位移的动态变化量进行测量。为此，本文设计了四自由度空间定位装置，并使其与计算机连接，实现了落震试验过程中，起落架在高速冲击状态下机轮三向位移的有效测量与记录。     

抽油机球铁齿轮的化学成分及生产工艺

为提高抽油机减速器齿轮铸件的机械性能，提出以Sn代替Mo作为合金元素，并通过试验确定了合理的Si、Cu、Sn的加入量。指出Si加入量应控制在1．9％－2．1％范围内，同时加入0．36％～0．9％的Cu和0．025％～0．07％的Sn，可保证球铁的强度和延伸率都满足QT700－2的要求。鉴于试件与实际铸件的表面硬度有一定的差值，为提高铸件表面硬度，进行了余热正火试验，并给出了铸件在铸型内的时间－冷却温度曲线。最后根据球铁化学成分的选择结果，进行了齿轮生产试验。     

机油泵转子的研究

本文研究了有关机油泵转子的齿形曲线、测绘及型腔设计等几个问题     

用瞬态频率波动法诊断齿轮故障

利用瞬态频率波动法实现频率调制信号的解调，提取齿轮的局部裂纹信息，并通过黄河ＴＮ２５２型汽车变速器疲劳试验的信号分析来验证。     

卷取机前侧导板的设计结构分析

卷取机前侧导板的作用是把带钢对准轧制中心线送入夹送辊,并在进入夹送辊时导板夹持带钢以减少钢卷的塔形。     

Numerical Simulation of Deforming Manufacture Process for Automobile Bevel Gear Blank

1 Introduction Rear axle bevel gearis a vital kind of annular accessory with high precision and hugeload availablefeatures ,andit is widely used as the differential drive in automobiles and tractor .In China ,the traditional manufactureapproach of producing the rear axle bevel gear blankis die forging,which not only requires a highinvestment ofproduct equipments , but also involves a low material utilization and great noise .In order to overcome thesedrawbacks , manyresearchers have done a gre…