The Causes and Prevention of Smut on Etched AISI 300 Stainless Steels

During the fabrication of stainless steel parts by photochemical machining (PCM), a seemingly random occurrence of a partially-adherent, brown/black deposit, known as smut, can occur. This quality problem has plagued the PCM industry for over 30 years. In the past, the problem has been attributed to “poor etch-quality” stainless steel. However, an extensive investigation by the authors, comprising some 7 person-years of effort, has established that while the metallurgy of the stainless steel has some influence on the formation of smut, by far the most important factor is the condition of the ferric chloride etchant used for etching the parts. The influences of etchant concentration, free hydrochloric acid content, temperature, atmosphere and hydrodynamic flow have now been assessed quantitatively for the first time. The investigation has led to the development of a theory outlining the causes of smut formation, thus providing solutions for its prevention.     

自由曲面数控加工走刀方向的优化研究

走刀方向对数控加工的效率有重要影响，尤其对于多曲面拼接自由曲面不规则轮廓区域的数控加工。针对现有自由曲面数控加工过程走刀方向优化研究存在的问题，提出了基于曲面数控加工区域划分的走刀方向优化策略，建立了简化的刀具轨迹计算模型和加工时间模型，并用实例加以验证，取得了满意的效果。     

纳米技术与特种加工

对纳米技术与特种加工进行了简要的分析和讨论，内容包括：微细刻蚀、LIGA、微细特种加工、纳米切削、基于扫描探针技术的纳米加工等。     

Probability of precision micro-machining of insulating Si3N4 ceramics by EDM

Electrical discharge machining (EDM) is used as a precision machining method for the electrically conductive hard materials with a soft electrode material. But recently we succeeded to machine on insulating material by EDM. The technology is named as an assisting electrode method. The EDMed surface is covered with the electrical conductive layer during discharge. The layer holds the electrical conductivity during discharge. For micro-EDM, the wear of tool electrode becomes lager ratio than the normal machining. So the micro-machining is extremely difficult to get the precision sample.

In this paper to obtain a fine and precise ceramics sample, some trials were carried out considering the EDM conditions, tool electrodes material and assisting electrode materials. Insulating Si₃N₄ ceramics were used for workpiece. The machining properties were estimated by the removal rate and tool wear ratio. To confirm the change of micro-machining process, the discharge waveforms were observed. The micro-machining of the Ø0.05 mm hole could be machined with the commercial sinking electrical discharge machine.     

X3016圆台铣床夹具液压系统改造

通过实例，简要分析了液压干涉现象对薄壁件加工质量的影响，整改措施涉及液压系统工作可靠性，压力稳定性以及液压节能技术等。     

100 MN双动铝挤压机主柱塞的机械加工工艺

介绍了国内首台万吨铝挤压机关键零部件主柱塞的加工工艺 ,以及在大型卧式车床上加工大直径、高光洁度阶梯深孔、盲孔的加工方法及工艺流程和所需工装设计等。     

钨钴硬质合金电化学蚀刻加工研究

对YG6硬质合金电化学蚀刻工艺进行了研究,提出了采用光致抗蚀剂作保护膜,在生成一定钝化膜的情况下进行电化学蚀刻的方法.在一定的蚀刻深度范围内,该工艺的可控性好、腐蚀区表面质量较好.     

曲面的2阶切触在4坐标曲面加工中应用

运用微分几何中的切触原理，研究了在多轴数控机床中刀具切削圆与零件曲面的切触条件和局部坐标系下的局部2阶切触条件，并用截形对刀具切削圆与曲面的贴近程度进行了分析。     

A global cutter positioning method for multi-axis machining of sculptured surfaces

Traditional cutter positioning methods have defects of global errors and incomplete optimization. Because of using local differential geometry and focusing on the cutting contact point, these defects cannot be avoided and will deteriorate accuracy in precision machining. The authors presented the conception of actual cutting edge of a toroidal mill which was extended from cutting contact point, and pointed out its importance in programming. Instantaneous cutter position error (ICPE) was also investigated. A new global method based on the ICPE curve was presented. Taking the relationship between surface and cutter into consideration thoroughly, this global method shows many advantages which have been verified by simulation and cutting tests.     

微细轴放电反拷成形方式的比较研究

阐述了放电反拷加工在微细轴、微细孔加工中的重要作用，介绍了4种常见的放电反拷加工方式。分析了不同进给方式对放电反拷加工结果的影响，给出了选择其中一种进给方式加工的微细轴实例。