一种放射CT重建的鲁棒估计算法

放射CT的重建问题可以归结为一种基于泊松分布的最大似然估计（MuxnimumLikelihood,ML），其中最著名的如EM算法[1]，这种算法存在的问题是鲁棒性不强，当观测数据中存在一些出格点（outlier）（如2％）时，EM算法的性能就变得很差。本文分析了算法性能变差的原因，将泊松分布近似为高斯分布后，仿照鲁律估计中的M-估计，构造了一种鲁棒性很强的EM改进算法。实验结果表明，即使在投影数据中混有10％的出格点，仍能重建出满意的结果来。     

几何造型的自由畸变方法

几何造型是计算机图形学的重要研究内容，ＣＡＤ／ＣＡＭ的核心技术，现行的许多造型系统仅限于造型二次曲面及旋转曲面，没有自由曲面造型能力，本文研究的自由畸变为法，很容易扩展这些系统的自由曲面造型功能，该方法已成功地用于扩展ＭＯＶＩＥ．ＢＹＵ系统的自由曲面造型功能。     

方盒形带凸缘件的板料形状优化设计

本文用大变形刚塑性有限元模拟正方形板料在方冲头拉延下的凸缘变形过程，并以所获得的工件形状与金属流动方向为依据，对初始板料形状进行修正。对修正后的坯料形状进行二次模拟，获得了与给定凸缘形状基本吻合的拉延件形状。文中对不同凸缘圆角对极料优化形状的影响作了计算，讨论了在保证边界轮廓位置不变的条件下网格划分的方法。     

Application of Galerkin Method to Dynamical Behavior of Viscoelastic Timoshenko Beam with Finite Deformation

The motion equations governing the dynamical behavior of a viscoelasticTimoshenko beam with finite deformation are derived and simplified byGalerkin method. The viscoelastic material is assumed to obey thethree-dimensional fractional derivative constitutive relation. Thedynamical behaviors of the simplified systems with order 1 and order 2are numerically computed and compared by using the computational methodpresented by the authors. The dynamical behaviors of the systems areuniform qualitatively, but there is a little deviation quantitatively.And the truncated system with order 1 is safer than the one of order 2.It is also shown that the lower order system is reasonable. Theinfluences of the load parameter and the fractional derivative parameter(material parameter) on the deflection of the beam are consideredrespectively. The numerical methods in nonlinear dynamics, such as phasediagram, and Poincaré section, are applied to reveal dynamical behaviorsof the nonlinear viscoelastic Timoshenko beam. There are plenty ofdynamical behaviors, such as periodicity, bifurcation, quasi-periodicityand chaos in the dynamical system.     

Ruins and Revival: Paris in the Aftermath of the Second World War

Although many devastated European cities have been studied, the bombing and reconstruction of key industrial sites and certain suburban residential zones in greater Paris have received little scholarly attention. Using archival sources, this article explores both destruction and reconstruction, and traces how homeless families shared apartments or endured years of 'temporary' accommodation in huts and other shelters. Post-war economic planning in France privileged the restoration of industrial and commercial sites; rebuilding of housing by the state, by housing co-operatives and by individual property owners received less support and progressed far more slowly. Today, the visual legacy of reconstruction is easily confused with that of completely new post-war apartments; however its origin, if not its architecture, is distinctively different and merits recognition in its own right.     

基于注塑件收缩率预测的模具型腔尺寸生成方法研究

针对注射模具CAD/CAM系统普遍采用平均收缩率来计算模具型腔尺寸所存在的不足，提出基于注塑件的收缩率预测结果生成模具成型尺寸的方法，并给出注塑件尺寸与模具成型尺寸之间的换算方法。最后通过反求工程中的曲面重构技术完成模具型腔表面的造型。     

小浪底水库调水调沙运用对大坝变形的影响分析

自2002年以来,小浪底水库汛前利用预泄汛限水位以上水量、腾空防洪库容的有利时机,连续5年进行集中调水调沙,获得了巨大的减淤效益.但在调水调沙期间,由于大流量下泄,水库水位下降较快,大坝变形明显增大,表现为水平位移向上游变化、垂直位移加速沉降变化的特点.监测分析结果表明,调水调沙运用不影响大坝安全稳定运行.     

带有长测量电缆的电容分压器的传输特性

该文研究了z_3=z_0,z_4=∞情况下电容分压器测量系统的传输特性,得出了U_(in)(s)=G(s)~(-1)U_0(s)在时间域的解析解及其差分形式,此解正可用于进行波形重建。给出了波形畸变与分压器、电缆及被测波形参数间的定量关系。     

蒸发式空冷器的运行实践

通过了解蒸发式空冷器的工作原理和结构,在运行实践过程中,对组成设备出现的问题提出相应的解决方案,并对部分组成设备提出改进的建议,以方便检修和维护,并提出了在冬季长时间高炉休风情况下保证水温不下降过低的解决方案。