漆包线残留挥发性有机物HS-GC-MS法测定分析

用HS-GC-MS(顶空进样气相色谱-质谱)分析法测定漆包线漆膜中挥发性有机物的残留量,适用于各种类型漆包线漆膜中残留挥发性有机物的痕量分析。本方法检出限为10-8(ω),线性范围为2.5×10-8～5×10-6(ω),加标平均回收率超过95%。     

纳米复合粉体改性变频绝缘漆研制

本文研究了纳米复合粉体提高漆包线绝缘漆耐变频性能的方法。采用高频老化实验对变频绝缘漆涂制的漆包线进行耐变频性能的测定。试验结果表明,纳米复合漆膜绝缘在变频电机中的使用寿命比普通漆膜绝缘提高7倍以上,且纳米颗粒分散工艺对绝缘漆的性能影响较大,文中还对纳米材料提高绝缘漆耐变频性能的机理进行了初步探讨。     

废旧聚酯改性漆包线绝缘漆的性能研究

采用溶胶凝胶法制备Al2O3溶胶,以废旧聚酯塑料瓶和Al2O3溶胶为原料制备聚酯多元醇溶液,然后将聚酯多元醇溶液与氨基树脂、环烷酸锌混合制成聚酯漆包线漆。通过红外光谱和X射线衍射分析对聚酯漆包线漆进行分子结构和物相表征。测试改性聚酯漆包线漆的热冲击、耐电压、介质损耗等性能。结果表明:Al2O3掺杂质量分数为10%时,制得的改性聚酯漆包线漆的性能最佳,介质损耗曲线的拐点温度可达到179℃,耐热性能明显提高。     

Influence of firing conditions and production methods on fracture strength of titanium-based metal ceramic crowns

Objectives: This study evaluated the effect of argon atmosphere compared with vacuum during porcelain firing on the fracture strength of crowns made of porcelain and electron beam melted (EBM) Ti-6Al-4 V, cast commercially pure titanium or milled commercially pure titanium. Methods: Sixty crown copings of c. p. titanium, Ti-6Al-4 V alloy and porcelain were fabricated using three production techniques. The copings were fired either under vacuum or in an argon gas atmosphere. Specimens were subdivided into groups of cast c. p. titanium, milled c. p. titanium and EBM Ti-6Al-4 V which were further subdivided according to firing modes employing either vacuum or argon gas. The 60 specimens were subjected to cyclic preloading and thermocycling, and were then individually loaded until interface fractured. Differences between the group mean values were calculated using the one-way ANOVA and Tukey’s range test. Two fractured samples from each group were cut with a diamond blade and examined using SEM and EDS for visualization and chemical composition analysis of the fractured interface. Results: The highest mean fracture strength values, though not significant, were recorded for the groups fired in argon atmosphere, and the lowest mean fracture strength values were recorded for the groups fired in vacuum, with one exception. Comparing the two main groups of firing atmosphere, no significant difference could be documented. SEM and EDS analysis indicated clear differences in composition and structure between the groups included in the study. Conclusions: Firing in argon atmosphere does not significantly improve the fracture strength of porcelain bonded to titanium.     

Biomimetic Zirconia with Cactus-Inspired Meso-Scale Spikes and Nano-Trabeculae for Enhanced Bone Integration

Biomimetic design provides novel opportunities for enhancing and functionalizing biomaterials. Here we created a zirconia surface with cactus-inspired meso-scale spikes and bone-inspired nano-scale trabecular architecture and examined its biological activity in bone generation and integration. Crisscrossing laser etching successfully engraved 60 μm wide, cactus-inspired spikes on yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) with 200–300 nm trabecular bone-inspired interwoven structures on the entire surface. The height of the spikes was varied from 20 to 80 μm for optimization. Average roughness (Sa) increased from 0.10 μm (polished smooth surface) to 18.14 μm (80 μm-high spikes), while the surface area increased by up to 4.43 times. The measured dimensions of the spikes almost perfectly correlated with their estimated dimensions (R² = 0.998). The dimensional error of forming the architecture was 1% as a coefficient of variation. Bone marrow-derived osteoblasts were cultured on a polished surface and on meso- and nano-scale hybrid textured surfaces with different spike heights. The osteoblastic differentiation was significantly promoted on the hybrid-textured surfaces compared with the polished surface, and among them the hybrid-textured surface with 40 μm-high spikes showed unparalleled performance. In vivo bone-implant integration also peaked when the hybrid-textured surface had 40 μm-high spikes. The relationships between the spike height and measures of osteoblast differentiation and the strength of bone and implant integration were non-linear. The controllable creation of meso- and nano-scale hybrid biomimetic surfaces established in this study may provide a novel technological platform and design strategy for future development of biomaterial surfaces to improve bone integration and regeneration.     

The Role of Cytokines Produced via the NLRP3 Inflammasome in Mouse Macrophages Stimulated with Dental Calculus in Osteoclastogenesis

Dental calculus (DC) is a common deposit in periodontitis patients. We have previously shown that DC contains both microbial components and calcium phosphate crystals that induce an osteoclastogenic cytokine IL-1β via the NLRP3 inflammasome in macrophages. In this study, we examined the effects of cytokines produced by mouse macrophages stimulated with DC on osteoclastogenesis. The culture supernatants from wild-type (WT) mouse macrophages stimulated with DC accelerated osteoclastogenesis in RANKL-primed mouse bone marrow macrophages (BMMs), but inhibited osteoclastogenesis in RANKL-primed RAW-D cells. WT, but not NLRP3-deficient, mouse macrophages stimulated with DC produced IL-1β and IL-18 in a dose-dependent manner, indicating the NLRP3 inflammasome-dependent production of IL-1β and IL-18. Both WT and NLRP3-deficient mouse macrophages stimulated with DC produced IL-10, indicating the NLRP3 inflammasome-independent production of IL-10. Recombinant IL-1β accelerated osteoclastogenesis in both RANKL-primed BMMs and RAW-D cells, whereas recombinant IL-18 and IL-10 inhibited osteoclastogenesis. These results indicate that DC induces osteoclastogenic IL-1β in an NLRP3 inflammasome-dependent manner and anti-osteogenic IL-18 and IL-10 dependently and independently of the NLRP3 inflammasome, respectively. DC may promote alveolar bone resorption via IL-1β induction in periodontitis patients, but suppress resorption via IL-18 and IL-10 induction in some circumstances.     

Engineering of a Biomimetic Interface between a Native Dental Tissue and Restorative Composite and Its Study Using Synchrotron FTIR Microscopic Mapping

The aim of this work is to develop a biomimetic interface between the natural tooth tissue and the restorative composite and to study it on the basis of synchrotron micro-FTIR mapping and multidimensional processing of the spectral data array. Using hierarchical cluster analysis of 3D FTIR data revealed marked improvements in the formation of the dentine/adhesive/dental hybrid interface using a biomimetic approach. The use of a biomimetic strategy (application of an amino acid–modified primer, alkaline calcium and a nano-c-HAp–modified adhesive) allowed the formation of a matrix that can be structurally integrated with natural dentine and dental composite. The biomimetic hybrid layer was characterised by homogeneous chemical composition and a higher degree of conversion of the adhesive during polymerisation, which should provide optimal integration of the dental composite with the dentine.     

Bacteriological Evaluation of Gingival Crevicular Fluid in Teeth Restored Using Fixed Dental Prostheses: An In Vivo Study

The present in vivo study determined the microbiological counts of the gingival crevicular fluid (GCF) among patients with fixed dental prostheses fabricated using three different techniques. A total of 129 subjects were divided into three study groups: first, cobalt-chrome-based, metal-ceramic prostheses fabricated by the conventional method (MC, n = 35); the second group consisted of cobalt-chrome-based, metal-ceramic prostheses fabricated by the computer-aided design and computer-aided manufacturing (CAD/CAM) technique (CC-MC, n = 35); the third group comprised zirconia-based ceramic prostheses fabricated using the CAD/CAM technique (CC-Zr, n = 35). The control consisted of 24 patients using prostheses fabricated with either MC, CC-MC, or CC-Zr. The GCF was obtained from the subjects before treatment, and 6 and 12 months after the prosthetic treatment. Bacteriological and bacterioscopic analysis of the GCF was performed to analyze the patients’ GCF. The data were analyzed using SPSS V20 (IBM Company, Chicago, IL, USA). The number of microorganisms of the gingival crevicular fluid in all groups at 12 months of prosthetic treatment reduced dramatically compared with the data obtained before prosthetic treatment. Inflammatory processes in the periodontium occurred slowly in the case of zirconium oxide-based ceramic constructions due to their biocompatibility with the mucous membranes and tissues of the oral cavity as well as a reduced risk of dental biofilm formation. This should be considered by dentists and prosthodontists when choosing restoration materials for subjects with periodontal pathology.     

Influence of Nano,Micro, and Macro Topography of Dental Implant Surfaces on Human Gingival Fibroblasts

Current research on dental implants has mainly focused on the influence of surface roughness on the rate of osseointegration, while studies on the development of surfaces to also improve the interaction of peri-implant soft tissues are lacking. To this end, the first purpose of this study was to evaluate the response of human gingival fibroblasts (hGDFs) to titanium implant discs (Implacil De Bortoli, Brazil) having different micro and nano-topography: machined (Ti-M) versus sandblasted/double-etched (Ti-S). The secondary aim was to investigate the effect of the macrogeometry of the discs on cells: linear-like (Ti-L) versus wave-like (Ti-W) surfaces. The atomic force microscopy (AFM) and scanning electron microscopy (SEM) analysis showed that the Ti-S surfaces were characterized by a significantly higher micro and nano roughness and showed the 3D macrotopography of Ti-L and Ti-W surfaces. For in vitro analyses, the hGDFs were seeded into titanium discs and analyzed at 1, 3, and 5 days for adhesion and morphology (SEM) viability and proliferation (Cck-8 and MTT assays). The results showed that all tested surfaces were not cytotoxic for the hGDFs, rather the nano-micro and macro topography favored their proliferation in a time-dependent manner. Especially, at 3 and 5 days, the number of cells on Ti-L was higher than on other surfaces, including Ti-W surfaces. In conclusion, although further studies are needed, our in vitro data proved that the use of implant discs with Ti-S surfaces promotes the adhesion and proliferation of gingival fibroblasts, suggesting their use for in vivo applications.