Conceptual design of a high-efficiency absorption cooling cycle

The search for high-efficiency, gas-fired cooling cycles has led to the development of dual-loop absorption machines with cooling coefficients of performance (COPs) in the 1.2 to 1.7 range. This increased performance may call for high generator temperatures, new working fluids or new materials of construction. In most cases, two different sets of working fluids are required. The conceptual design presented here is aimed at obtaining high efficiencies with relatively low temperatures, employing only one set of fluids. The concept consists of two loops coupled in a configuration aimed at minimizing the loss of thermodynamic availability incurred when transferring refrigerant between the loops. The working fluid pair is a solution of lithium bromide-water. The calculated COPs are of the order of 1.8. The cycle relies on an elaborate evaporator-absorber combination. The paper presents the conceptual design, the critical assumptions, and the performance calculations for the concept.     

Parallel feedforward class-AB control circuits for low-voltage bipolar rail-to-rail output stages of operational amplifiers

A new family of class-AB control circuits for bipolar rail-to-rail output stages of operational amplifiers is presented. Step by step, we report the development of five simple class-AB control circuits showing the advantages of using parallel feedforward. The circuits have been designed in such a way that temperature, supply voltage and process parameters have little influence. To test the output stages, one of them has been implemented in a very simple two-stage operational amplifier on a semi-custom chip. Measurements show a bandwidth of 2.5 MHz, a gain of 40 dB, a quiescent current of 23µA and a maximum output current of 250µA. Simulation results of three other simple operational amplifiers with the new class-AB control circuits are shown, which have a higher gain and maximum output current.     

初论带状光纤缆结构设计

推导出了成叠带状光纤在松套管中余长的两个计算公式，此两公式是带状光纤缆结构设计需要用到的基本公式。此外，还对带状光纤缆结构设计作了初步讨论。     

Volatile organo-halogen trace analysis in beverages by thin-layer headspace enrichment and electron-capture gas-chromatography

Applicability of thin-layer headspace (TLHS) procedure giving an aqueous concentrate and also classical purge and trap (PT) in off-line mode to isolate and enrich volatile organohalogen compounds in common beverages was tested. Both enrichment tech-niques were used in combination with gas chromatography – electron capture detection (GC-ECD). TLHS, combined with direct aqueous injection (DAI)-GC-ECD, proved applicable in the determination of volatile organohalogen compounds in all studied beverages, while the PT in a version with no preliminary sample pre-treatment was of limited applicability. Detection limits of the TLHS-based procedure were in the order of 1 ppt. Content of volatile organohalogen compounds in a number of beverages available on the Polish market including mineral waters, beers, juices, carbonated and non-carbonated soft drinks, etc. was determined by means of TLHS-DAI-GC-ECD.     

国际乳业的热点论题：蛋白质标准化

介绍了蛋白质的标准化这一国际乳品界正热的研究和讨论题目，综述了蛋白质标准化的必要性和世界上目前采用的方法，展望了膜技术在蛋白质标准化上的应用前景。     

努力攀登科技高峰 为把石化工业建成支柱产业多做贡献

概述中国石化总公司成立以来所取得的重大科技成果。     

节理岩体的边界元模型及其应用

边界元法广泛应用于岩石力学问题的最大障碍是岩体的非均质及其包含的大量节理断层，本文采用多子域思想结合节理断层的非线性模型较好地解决了这一难题。该法在老厂锡矿的应用较好地解释了该矿采场顶板的冒落机理。     

加脂的化学柔软作用机理

加脂是软革制造过程中最重要的工序。本文建立了一个加脂过程和加脂机理的模型。在该模型中，传统的完全依赖ＰＨ值的观察被扩展，结合了加脂剂与浴液间的相互作用的性能和传送提供润滑作用的中性油组分的乳化剂的作用，并扩展了乳化剂的角色。以这种方式引入的化学柔软作用对革的强度有积极的效果，而相比效应力柔软作用会降低革的强度。     

Finite Element Analysis of a Moving Boundary Value Problem

A finite element formulation and the solution of a set of nonlinear coupled heat and mass transfer equations for a two-phase system with a moving evaporation interface is presented. The interface condition takes into account the moisture transfer balance at the moving boundary. The finite element results were compared with existing results for a single phase system for model validation. In the two-phase system, the movement of evaporation front has an appreciable effect on the temperature and moisture distribution inside the porous medium during drying. The effect of the nondimensional heat of vapourization parameter γ on the evaporation front, temperature and moisture distribution in porous medium was studied. The higher the value of γ, the slower is the movement of the evaporation front. The temperature decreased and the moisture content increased as the nondimensional vapourization parameter γ increased. This model has potential applications in studying the heat and mass transfer characteristics in food and biomaterials.     

大型储罐的罐壁设计

根据十万立方米浮顶油罐罐壁板应力测试的实测结果，运用应力分析程序，对罐壁板应力分布情况进行了分析和比较，通过调整罐壁板的厚度，使新设计储罐的罐壁板应力分布更加均匀、合理。