异向旋转双螺杆挤出机的发展前景

本文通过分析螺杆在不同区段的几何特征及其对相应加工阶段的影响对平行和锥形双螺杆挤出机进行了全面的比较。     

Pressureless low temperature sintering of nanocrystalline zirconia ceramics via dry powder processing

Pressureless sintering approaches provide a simple avenue to manufacture dense ceramic parts with minimal processing equipment, but current pressureless sintering techniques have yet to demonstrate capabilities of producing dense ceramics while maintaining sub-50 nm grain sizes. Nanocrystalline yttria stablized zirconia ceramics were process from 4 mol% yttria stablized zirconia (4YSZ) nanopowders with a crystallite size of 7.5 nm using dry cold isostatic pressing (CIP) where powders are dried immediately prior to green compact formation and CIP vacuum bagging. It is shown that CIP pressures >75 000 psi (517 MPa) effectively remove pores larger than 100 nm and that pressureless sintering occurs at reduced temperatures for green densities ≥50%. Though the sintering kinetics are shown to be similar to other zirconia nanopowder sintering studies, the small initial crystallize size and reduced sintering temperature allowed densities as high as 97.2%, while retaining a ceramic grain size at or below 40 nm. Produced nanocrystalline 4YSZ ceramics with a grain size of 30.3 nm and a density of 96.3% had Vicker's hardnesses as high as 14.2 GPa and Vicker's indentation fracture resistance of 3.43 MPa·, demonstrating that simple processing approaches can be refined to fabricate nanocrystalline ceramics while maintaining high hardness and indentation fracture resistance.     

A social interaction system based on cloud computing for mobile video telephony

As the use of smartphones become popular,people heavily depend on smartphone applications to deal with their social activities.For this reason,traditional message texting between mobile applications does not fulfill the versatile requirements of social networking.Many mobile applications use multimodality to deliver multimedia messages including sticker,voice and photo message,video call,and snap movie to enhance the communicative capability.However,without face-to-face interaction,people may fail to detect the other side’s non-verbal social behavior such as fine-grain facial expressions,body movements,or hand gesture.During social interaction,non-verbal behavior conveys information about the involved individuals and help the speakers express their social emotion in an implicit way.It is so important for real-world face-to-face interaction but is often blocked on the mobile telephony.To cope with this problem,we propose an afective computing model to assist the representation of social emotion and then help the progress of social interaction on the mobile telephony.In this model,for the purpose of real-time afective analysis,we delegate the computing loading to the cloud side service and enhance the system’s scalability and availability.The result of this experiment approves the feasibility of our system design for the applications of social intelligent.Also,the system provides a research framework of the social intelligent system on the mobile telephony.     

一种适应光照多变的夜间前景提取方法

夜间前景提取是智能监控的必要处理过程,也是新时代下店铺防盗的高效手段。提出了一种在强弱光多变下具有检测鲁棒性的动态目标自动提取算法。在亮度通道上利用直方图均衡技术根据设置参数自适应灰度增幅,结合Canny边缘图像进行差分处理,最后给出前景提取算法。实验结果表明:在强弱光不同光照环境下,该方法可以很好的削弱不同光照对前景提取带来的多噪声、过度曝光等影响,提高前景对比度,相比其他方法,显示效果清晰完整,并满足实时性要求。     

Fast method for SAR echo simulation of a three-dimensional ground scene

Due to huge calculation of SAR echo simulation of a three-dimensional (3D) ground scene, a fast simulation method is proposed. First, the data of a 3D ground scene are fractionally interpolated based on the Fractional Brownian Motion (FBM) model. Second, the data interpolated are divided into lots of small facets whose precision meets the simulation requirement, the backscattering coefficients of the small facets are calculated. Third, the shaded area is judged by the comparison method of overlook angles. Three parallel levels are analyzed and the kernel function is designed. Finally, the computing method of reduction adding and external thread are also utilized under the framework of GPU in order to get high efficiency. With the methods mentioned above, the imaging result of experimental DEM data verifies the validity and superiority of the proposed method.     

Infrared heat treatment of Ti-6Al-4V with electroplated Cu

The objective of this study is to investigate an innovative infrared (IR) technique to enhance adhesion of electroplated copper (Cu) on Ti-6Al-4V without dichromate dipping. The ultimate goal is to develop a Cu coating process on Ti-6Al-4V without hazardous hexavalent chromium (Cr) solution treatments. Cu coatings of around 50 μm were electroplated on Ti-6Al-4V specimens at a current density of 0.03 A/cm² in an acidic Cu solution. To improve adhesion of coatings, IR heat treatments were performed on the Cu-coated samples at different temperatures and durations: 860 °C for 600 s and 875 °C for 20–120 s. This process was accomplished in an attempt to replace the use of dichromate dipping before electroplating. For samples heat treated at 860 °C, no bonding existed, even after 600 s. It is believed that solid-state diffusion prevailed at 860 °C and that 600 s was not enough for sufficient diffusion to occur. Adhesion was poor when samples were heat treated at 875 °C for 20 s. Excellent adhesion was observed when the heat treatment holding time was increased to 40 s. For 90 s, the surface appearance of coatings partially changed from Cu-colored to a grayish color. There was no Cu left on the surface after a 120 s heat treatment. From optical microscopic observations on sample cross sections, an interlayer between the Cu and Ti-6Al-4V formed when heat treated at 875 °C for 40 s and longer. The interlayer thickness increased as the holding time increased, until depletion of Cu. The sheet resistivity of coated specimens was on the order of pure Cu for samples heat treated at 875 °C and less than 90 s. During the 875 °C heat treatment, the following occurred: solid-state diffusion of Cu in Ti-6Al-4V, formation of eutectic solutions, dissolution of Cu and Ti-6Al-4V into the liquid phase, and the formation of intermetallic compounds. The lowest eutectic temperature of 875 °C played a key role in this innovative process of Cu coating on Ti-6Al-4V. This paper was presented at the 2nd International Surface Engineering Congress sponsored by ASM International, on September 15–17, 2003, in Indianapolis, Indiana and appears on pp. 403–10 of the Proceedings.     

研究合金定向凝固组织的脉冲磁场设备的研制

介绍了脉冲电磁场发生设备的工作原理 ,设计等。并介绍了其如何与合金的定向凝固设备结合 ,以实现对合金的定向凝固组织在脉冲电磁场作用下的研究。     

"THERMO": COMPUTER PROGRAM FOR SIMULATION OF SURFACE PULSE HEATING

1.IntroductionTheoneofthemostimportantparametersofthethermalcycleduringsurfacepulseheatingistherateofheatingandcooling.Knowledgeofthesevaluesinparticulartemperatureintervalshelpstoprognosticatephasestructureintheheataffectedzones(HAZ),toanalyzecausesofthestructuretransformations.Todaythereisavoluminousliteratureoncalculationofthethermalconditionsforasolidduringsurfaceprocessing.Butthetemperaturevariationsareusuallyexaminedasafunctionoftimeorspacecoordinates.Sometimesthefirstderivativeofthete…     

应用MES技术优化分组加工工艺过程

分组加工模式的应用是特色工艺研究和精细化加工的结合,目前被应用在了很多企业中。为了解决计划制订到生产调度指挥这一过程中的问题,企业采用了MES技术来优化这一模式下的工艺过程。分析了MES技术的应用。     

A Proposal for Implementing Multi-User Data Base (MUD) Technology in and Academic Library

Multi-user Data base (MUD) technology, and its object-oriented descendant (MOO), is one of the most exciting tools to surface on the Internet, and offers libraries and librarians a unique opportunity to participate in creating user-friendly standardized interfaces to many of our most frequently used resources. These resources include those we access through the Internet already, using gopher, telnet, WWW, and FTP, and also those proprietary databases that we currently access through leased lines such as OCLC First Search, Prism, DIALOG, and many others. MOO technology is already being used successfully to create user-extensible collaborative professional environments for educators, astronomers, and computer network systems administrators. With the growing relevance of the Internet for libraries and other information professionals, it behooves the library community to engage those emerging technologies which will aloow us to interface most effectively with the Internet and its many resources, with the proprietary databases which we depend on, and with one another.